PS2701A-1-L-A

PHOTOCOUPLER PS2701A-1 HIGH ISOLATION VOLTAGE SOP PHOTOCOUPLER NEPOC Series DESCRIPTION The PS2701A-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor to realize an excellent cost performance. This package is SOP (Small Outline Package) type and has shield effect to cut off ambient light. It is designed for high density mounting applications. FEATURES • High isolation voltage (BV = 3 750 Vr.m.s.) • SOP (Small Outline Package) type • Ordering number of taping product: PS2701A-1-F3, F4: 3 500 pcs/reel • Pb-Free product • Safety standards • UL approved: No. E72422 • CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950) • DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40008902 (Option) APPLICATIONS • Hybrid IC • Measuring instruments • Power supply • Programmable logic controllers Document No. PN10396EJ05V0DS (5th edition) Date Published August 2009 NS The mark shows major revised points. The revised points can be easily searched by copying an "" in the PDF file and specifying it in the "Find what:" field. PS2701A-1 PACKAGE DIMENSIONS (in millimeters) PHOTOCOUPLER CONSTRUCTION Parameter Unit (MIN.) Air Distance 5 mm Outer Creepage Distance 5 mm Inner Creepage Distance 2.5 mm Isolation Distance 0.3 mm MARKING EXAMPLE Pb-Free 2 Special version (Pb-Free and Halogen Free) Data Sheet PN10396EJ05V0DS PS2701A-1 ORDERING INFORMATION Part Number Order Number PS2701A-1 PS2701A-1-A PS2701A-1-F3 PS2701A-1-F3-A PS2701A-1-F4 PS2701A-1-F4-A PS2701A-1-V Solder Plating Specification Pb-Free Packing Style Safety Standard Approval Magazine case 100 pcs Standard products Embossed Tape 3 500 pcs/reel (UL, CSA approved) PS2701A-1-V-A Magazine case 100 pcs DIN EN60747-5-2 PS2701A-1-V-F3 PS2701A-1-V-F3-A Embossed Tape 3 500 pcs/reel (VDE0884 Part2) PS2701A-1-V-F4 PS2701A-1-V-F4-A PS2701A-1 PS2701A-1Y-A Special version Magazine case 100 pcs Standard products PS2701A-1-F3 PS2701A-1Y-F3-A (Pb-Free and Embossed Tape 3 500 pcs/reel (UL, CSA approved) PS2701A-1-V PS2701A-1Y-V-A Halogen Free) Magazine case 100 pcs DIN EN60747-5-2 PS2701A-1-V-F3 PS2701A-1Y-V-F3-A Embossed Tape 3 500 pcs/reel (VDE0884 Part2) Application *1 Part Number PS2701A-1 Approved (Option) PS2701A-1 Approved (Option) *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10396EJ05V0DS 3 PS2701A-1 ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified) Parameter Symbol Ratings Unit Forward Current (DC) IF 30 mA Reverse Voltage VR 6 V 0.8 mW/ C PD 80 mW IFP 0.5 A Collector to Emitter Voltage VCEO 70 V Emitter to Collector Voltage VECO 5 V IC 30 mA 1.5 mW/ C PC 150 mW Isolation Voltage*2 BV 3 750 Vr.m.s. Operating Ambient Temperature TA –55 to +100 C Storage Temperature Tstg –55 to +150 C Diode Power Dissipation Derating Power Dissipation Peak Forward Current Transistor *1 Collector Current Power Dissipation Derating Power Dissipation PD/ C PC/ C *1 PW = 100 s, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25 C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together. 4 Data Sheet PN10396EJ05V0DS PS2701A-1 ELECTRICAL CHARACTERISTICS (TA = 25 C) Parameter Diode Symbol Conditions Forward Voltage VF IF = 5 mA Reverse Current IR VR = 5 V Terminal Capacitance Ct V = 0 V, f = 1.0 MHz Transistor Collector to Emitter Dark Current ICEO IF = 0 mA, VCE = 70 V Coupled Current Transfer Ratio (IC/IF)*1 CTR IF = 5 mA, VCE = 5 V Collector Saturation Voltage VCE (sat) IF = 10 mA, IC = 2 mA Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1.0 MHz Rise Time Fall Time *2 *2 tr VCC = 5 V, IC = 2 mA, RL = 100 tf MIN. TYP. MAX. Unit 1.2 1.4 V 5 A 10 50 0.13 pF 100 nA 300 % 0.3 V 1011 0.4 pF 5 s 7 *1 CTR rank N: 50 to 300 (%) P: 150 to 300 (%) L: 100 to 300 (%) M: 50 to 150 (%) *2 Test circuit for switching time Data Sheet PN10396EJ05V0DS 5 PS2701A-1 TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) Remark 6 The graphs indicate nominal characteristics. Data Sheet PN10396EJ05V0DS PS2701A-1 Remark The graphs indicate nominal characteristics. Data Sheet PN10396EJ05V0DS 7 PS2701A-1 TAPING SPECIFICATIONS (in millimeters) 8 Data Sheet PN10396EJ05V0DS PS2701A-1 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature 260 C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220 C 60 seconds or less • Time to preheat temperature from 120 to 180 C 120 30 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (2) Wave soldering • Temperature 260 C or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120 C or below (package surface temperature) • Number of times One (Allowed to be dipped in solder including plastic mold portion.) • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron • Peak temperature (lead part temperature) 350 C or below • Time (each pins) 3 seconds or less • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100 C. Data Sheet PN10396EJ05V0DS 9 PS2701A-1 (4) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler Check the setting values before use, since the forward current conditions at CTR measurement differ according to product. When using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to CTR value variations or the like. This tendency may sometimes be obvious, especially below IF = 1 mA. Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. 10 Data Sheet PN10396EJ05V0DS PS2701A-1 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Symbol Climatic test class (IEC 60068-1/DIN EN 60068-1) Spec. Unit 55/100/21 Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.5 UIORM, Pd 5 pC UIORM Upr 707 1 060 Vpeak Vpeak Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 UIORM, Pd 5 pC Upr 1 325 Vpeak Highest permissible overvoltage UTR 6 000 Vpeak Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303 Part 11)) 2 CTI Material group (DIN EN 60664-1 VDE0110 Part 1) 175 III a Storage temperature range Tstg –55 to +150 C Operating temperature range TA –55 to +100 C Ris MIN. Ris MIN. 1012 1011 Tsi Isi Psi 150 300 500 Ris MIN. 109 Isolation resistance, minimum value VIO = 500 V dc at TA = 25 C VIO = 500 V dc at TA MAX. at least 100 C Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = Tsi Data Sheet PN10396EJ05V0DS C mA mW 11 PS2701A-1 12 Data Sheet PN10396EJ05V0DS PS2701A-1 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. • Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. • Do not burn, destroy, cut, crush, or chemically dissolve the product. • Do not lick the product or in any way allow it to enter the mouth.