PS2706-1-F3-A

PHOTOCOUPLER PS2706-1 AC INPUT RESPONSE DARLINGTON TRANSISTOR SOP MULTI PHOTOCOUPLER SERIES −NEPOC Series− DESCRIPTION The PS2706-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon darlingtonconnected phototransistor. This is mounted in a plastic SOP (Small Out-line Package) for high density applications. This package has shield effect to cut off ambient light. FEATURES • AC input response • High current transfer ratio (CTR = 2 000% TYP.) • High isolation voltage (BV = 3 750 Vr.m.s.) • Small and thin (SOP) package • High-speed switching (tr, tf = 200 µs TYP.) • Ordering number of taping product: PS2706-1F3, F4 • Safety standards • UL approved: File No. E72422 • BSI approved: File No. 8219/8220 • CSA approved: File No. CA 101391 • DIN EN60747-5-2 (VDE0884 Part2) approved (Option) APPLICATIONS • Hybrid IC • Telephone, Exchange equipment • FA/OA equipment • Programmable logic controllers Document No. PN10244EJ02V0DS (2nd edition) Date Published March 2006 CP(K) The mark ! shows major revised points. PS2706-1 PACKAGE DIMENSIONS (in millimeters) PS2706-1 4.0±0.5 TOP VIEW 4 1 3 2 1. Anode,Cathode 2. Cathode,Anode 3. Emitter 4. Collector 0.15 +0.10 –0.05 2.0 0.1±0.1 2.1±0.2 7.0±0.3 4.4 2.54 0.4 +0.10 –0.05 0.5±0.3 0.25 M MARKING EXAMPLES 2 Data Sheet PN10244EJ02V0DS PS2706-1 ORDERING INFORMATION Part Number Order Number Solder Plating Packing Style Safety Standard Application Part Approval Number*1 Specification PS2706-1 PS2706-1-A Pb-Free Magazine case 100 pcs Standard products PS2706-1-F3 PS2706-1-F3-A Embossed Tape 3 500 pcs/reel (UL, BSI, CSA PS2706-1-F4 PS2706-1-F4-A PS2706-1-V PS2706-1-V-A Magazine case 100 pcs DIN EN60747-5-2 PS2706-1-V-F3 PS2706-1-V-F3-A Embossed Tape 3 500 pcs/reel (VDE0884 Part2) PS2706-1-V-F4 PS2706-1-V-F4-A PS2706-1 approved) Approved (Option) *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10244EJ02V0DS 3 PS2706-1 ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Symbol Ratings Unit IF ±50 mA ΔPD/°C 0.8 mW/°C PD 80 mW IFP ±1 A Collector to Emitter Voltage VCEO 40 V Emitter to Collector Voltage VECO 6 V IC 200 mA ΔPC/°C 1.5 mW/°C PC 150 mW Isolation Voltage*2 BV 3 750 Vr.m.s. Operating Ambient Temperature TA –55 to +100 °C Storage Temperature Tstg –55 to +150 °C Diode Forward Current (DC) Power Dissipation Derating Power Dissipation Peak Forward Current Transistor *1 Collector Current Power Dissipation Derating Power Dissipation *1 PW = 100 µs, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output Pins 1-2 shorted together, 3-4 shorted together. 4 Data Sheet PN10244EJ02V0DS PS2706-1 ELECTRICAL CHARACTERISTICS (TA = 25 °C) Parameter Diode Symbol Conditions MIN. TYP. MAX. Unit 1.4 V Forward Voltage VF IF = ±5 mA 1.1 Terminal Capacitance Ct V = 0 V, f = 1 MHz 60 Transistor Collector to Emitter Dark Current ICEO IF = 0 mA, VCE = 40 V Coupled Current Transfer Ratio (IC/IF) CTR IF = ±1 mA, VCE = 2 V 200 2 000 CTR Ratio*1 CTR1/ CTR2 IF = ±1 mA, VCE = 2 V 0.3 1.0 Collector Saturation Voltage VCE (sat) IF = ±1 mA, IC = 2 mA Isolation Resistance RI-O VI-O = 1 kVDC Isolation Capacitance CI-O V = 0 V, f = 1 MHz 0.4 pF VCC = 5 V, IC = 2 mA, RL = 100 Ω 200 µs Rise Time *2 tr Fall Time *2 tf pF 400 % 3.0 1.0 1011 nA V Ω 200 *1 CTR1 = IC1/IF1, CTR2 = IC2/IF2 IC1 IF1 VCE IC2 IF2 *2 Test circuit for switching time Pulse input VCC IF PW = 1 ms, Duty cycle = 1/10 Input monitor VOUT 50 RL = 100 Data Sheet PN10244EJ02V0DS 5 PS2706-1 TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) Diode Power Dissipation PD (mW) 100 75 50 25 25 0 50 75 200 150 1.5 mW/˚C 100 50 25 0 100 50 75 100 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) FORWARD CURRENT vs. FORWARD VOLTAGE FORWARD CURRENT vs. FORWARD VOLTAGE 100 80 10 TA = +100 ˚C +75 ˚C +50 ˚C 1 Forward Current IF (mA) Forward Current IF (mA) 60 +25 ˚C 0 ˚C –25 ˚C –55 ˚C 0.1 40 20 0 –20 –40 –60 0.8 1.0 1.2 1.4 –80 –1.6 –1.2 –0.8 –0.4 1.6 0.4 0.8 1.2 1.6 Forward Voltage VF (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 50 000 300 10 000 5 000 100 IF = 10 mA VCE = 40 V 24 V 10 V 5V 2V 1 000 500 100 50 10 5 1 –60 –40 5 mA 1 mA 30 0.5 mA 10 0.2 mA 3 0.1 mA 1 0.3 –20 0 20 40 60 80 100 0.1 0.4 0.6 0.8 1.0 1.2 1.4 Collector Saturation Voltage VCE (sat) (V) Ambient Temperature TA (˚C) Remark The graphs indicate nominal characteristics. 6 0 Forward Voltage VF (V) Collector Current IC (mA) Collector to Emitter Dark Current ICEO (nA) 0.01 0.6 Data Sheet PN10244EJ02V0DS 1.6 PS2706-1 NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE Normalized Current Transfer Ratio CTR 180 Collector Current IC (mA) 160 140 120 IF = 5 mA 100 2 mA 80 60 1m A 40 0.5 mA 20 2 0 4 6 8 10 0.8 0.6 0.4 Normalized to 1.0 at TA = 25 ˚C, IF = 1 mA, VCE = 2 V 0.2 0.0 –25 –50 0 25 50 75 Ambient Temperature TA (˚C) CURRENT TRANSFER RATIO vs. FORWARD CURRENT SWITCHING TIME vs. LOAD RESISTANCE 100 1 000 VCC = 5 V, IC = 2 mA, 500 CTR = 2 200 % VCE = 2 V 2 500 Switching Time t ( µ s) Current Transfer Ratio CTR (%) 1.0 Collector to Emitter Voltage VCE (V) 3 000 2 000 1 500 1 000 tf 100 tr td 50 ts 10 5 500 0 10 50 100 1 50 300 100 500 5k 1k Forward Current IF (µA) Load Resistance RL ( ) CURRENT TRANSFER RATIO vs. FORWARD CURRENT SWITCHING TIME vs. LOAD RESISTANCE 10 000 VCE = 2 V 9 000 5 000 1 000 500 8 000 Switching Time t ( µ s) Current Transfer Ratio CTR (%) 1.2 7 000 6 000 5 000 4 000 3 000 2 000 tf IF = 1 mA, VCC = 5 V, CTR = 2 200 % ts 100 50 tr 10 td 5 1 000 0 0.5 1 5 1 50 100 10 Forward Current IF (mA) 500 1 k 5 k 10 k 50 k Load Resistance RL ( ) Remark The graphs indicate nominal characteristics. Data Sheet PN10244EJ02V0DS 7 PS2706-1 LONG TERM CTR DEGRADATION FREQUENCY RESPONSE 5 1.2 IF = 1 mA, VCE = 2 V 1.0 CTR (Relative Value) Normalized Gain GV 0 –5 RL = 100 –10 –15 –20 0.1 0.8 0.6 0.4 0.2 0.5 1 5 10 50 100 0.0 1 102 103 104 Time (Hr) Frequency f (kHz) Remark The graphs indicate nominal characteristics. 8 IF = 1 mA, TA = 60 ˚C IF = 1 mA, TA = 25 ˚C Data Sheet PN10244EJ02V0DS 105 106 PS2706-1 TAPING SPECIFICATIONS (in millimeters) Data Sheet PN10244EJ02V0DS 9 PS2706-1 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature 260°C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220°C 60 seconds or less • Time to preheat temperature from 120 to 180°C 120±30 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature 260°C or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120°C or below (package surface temperature) • Number of times One (Allowed to be dipped in solder including plastic mold portion.) • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron • Peak temperature (lead part temperature) 350°C or below • Time (each pins) 3 seconds or less • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100°C. 10 Data Sheet PN10244EJ02V0DS PS2706-1 (4) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler Check the setting values before use, since the forward current conditions at CTR measurement differ according to product. When using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to CTR value variations or the like. Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10244EJ02V0DS 11 PS2706-1 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT (VDE0884) Parameter Symbol Speck Unit Application classification (DIN VDE 0109) for rated line voltages ≤ 300 Vr.m.s. IV for rated line voltages ≤ 600 Vr.m.s. III Climatic test class (DIN IEC 68 Teil 1/09.80) 55/100/21 Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) UIORM 710 Vpeak Upr 850 Vpeak Upr 1 140 Vpeak UTR 6 000 Vpeak Upr = 1.2 × UIORM, Pd < 5 pC Test voltage (partial discharge test, procedure b for all devices test) Upr = 1.6 × UIORM, Pd < 5 pC Highest permissible overvoltage Degree of pollution (DIN VDE 0109) 2 Clearance distance >5 mm Creepage distance >5 mm Comparative tracking index (DIN IEC 112/VDE 0303 part 1) CTI Material group (DIN VDE 0109) 175 III a Storage temperature range Tstg −55 to +150 °C Operating temperature range TA –55 to +100 °C VIO = 500 V dc at TA = 25 °C Ris MIN. 1012 Ω VIO = 500 V dc at TA MAX. at least 100 °C Ris MIN. 1011 Ω Package temperature Tsi 150 °C Current (input current IF, Psi = 0) Isi 200 mA Power (output or total power dissipation) Psi 300 mW Ris MIN. 109 Ω Isolation resistance, minimum value Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Isolation resistance VIO = 500 V dc at TA = 175 °C (Tsi) 12 Data Sheet PN10244EJ02V0DS NOTICE 1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. California Eastern Laboratories and Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. California Eastern Laboratories has used reasonable care in preparing the information included in this document, but California Eastern Laboratories does not warrant that such information is error free. California Eastern Laboratories and Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. 3. California Eastern Laboratories and Renesas Electronics do not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of California Eastern Laboratories or Renesas Electronics or others. 4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. California Eastern Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product. 5. Renesas Electronics products are classified according to the following two quality grades: “Standard” and “High Quality”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. “Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. “High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc. Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. California Eastern Laboratories and Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by California Eastern Laboratories or Renesas Electronics. 6. You should use the Renesas Electronics products described in this document within the range specified by California Eastern Laboratories, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. California Eastern Laboratories shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. Please contact a California Eastern Laboratories sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. California Eastern Laboratories and Renesas Electronics assume no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. It is the responsibility of the buyer or distributor of California Eastern Laboratories, who distributes, disposes of, or otherwise places the Renesas Electronics product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, California Eastern Laboratories and Renesas Electronics assume no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics products. 11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of California Eastern Laboratories. 12. Please contact a California Eastern Laboratories sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. NOTE 1: “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. NOTE 2: “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics. NOTE 3: Products and product information are subject to change without notice. CEL Headquarters • 4590 Patrick Henry Drive, Santa Clara, CA 95054 • Phone (408) 919-2500 • www.cel.com For a complete list of sales offices, representatives and distributors, Please visit our website: www.cel.com/contactus