PS2802-4-F4

PHOTOCOUPLER PS2802-1,PS2802-4 HIGH ISOLATION VOLTAGE DARLINGTON TRANSISTOR TYPE SOP PHOTOCOUPLER −NEPOC Series− DESCRIPTION The PS2802-1 and PS2802-4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon darlington-connected photo transistor in a plastic SOP for high density applications. This package has shield effect to cut off ambient light. FEATURES • High isolation voltage (BV = 2 500 Vr.m.s.) • Small and thin package (4,16-pin SOP, Pin pitch 1.27 mm) • High current transfer ratio (CTR = 2 000 % TYP. @ IF = 1 mA, VCE = 2 V) • Ordering number of tape product: PS2802-1-F3, F4, PS2802-4-F3, F4 • Safety standards: PS2802-1, -4 • UL approved: File No. E72422 (S) • BSI approved: No. 8188, 8189 • VDE0884 approved (Option): PS2802-4 only APPLICATIONS • Programmable logic controllers • Measuring instruments • Hybrid IC Document No. PN10252EJ01V0DS (1st edition) (Previous No. P10125EJ5V0DS00) Date Published February 2003 CP(K) The mark shows major revised points. PS2802-1,PS2802-4 PACKAGE DIMENSIONS (UNIT: mm) PS2802-1 2.7±0.3 10.3±0.3 PS2802-4 TOP VIEW 16 15 14 13 12 11 10 9 TOP VIEW 43 1. Anode 2. Cathode 3. Emitter 4. Collector 12345678 1. 3. 5. 7. 2. 4. 6. 8. 9. 11. 13. 15. 10. 12. 14. 16. Anode Cathode Emitter Collector 12 7.0±0.3 7.0±0.3 0.15+0.10 –0.05 2.0±0.1 0.1±0.1 0.5±0.3 2.0+0.3 –0.2 0.15+0.10 –0.05 0.1±0.1 4.4 4.4 0.40+0.10 –0.05 0.12 M 1.27 0.4±0.1 0.12 M 1.27 0.5±0.3 MARKING PS2802-1 PS2802-4 2 003 0 03 Assembly Lot No. 1 pin Mark PS2802-4 N 003 Country Assembled Type Number Assembly Lot Last number of type No. : 2 N 0 03 Week Assembled Year Assembled (Last 1 Digit) CTR Rank Code Week Assembled Year Assembled (Last 1 Digit) 2 Data Sheet PN10252EJ01V0DS PS2802-1,PS2802-4 ORDERING INFORMATION (Solder Contains Lead) Part Number PS2802-1 PS2802-1-F3 PS2802-1-F4 PS2802-4 PS2802-4-F3 PS2802-4-F4 16-pin SOP Magazine Case 45 pcs Embossed Tape 2 500 pcs/reel PS2802-4 Package 4-pin SOP Packing Style 50 pcs (Tape 50 pcs cut) Embossed Tape 3 500 pcs/reel Application Part *1 Number PS2802-1 *1 For the application of the Safety Standard, following part number should be used. ORDERING INFORMATION (Pb-Free) Part Number PS2802-1-A PS2802-1-F3-A PS2802-1-F4-A PS2802-4-A PS2802-4-F3-A PS2802-4-F4-A 16-pin SOP Magazine Case 45 pcs Embossed Tape 2 500 pcs/reel PS2802-4 Package 4-pin SOP Packing Style 50 pcs (Tape 50 pcs cut) Embossed Tape 3 500 pcs/reel Application Part *1 Number PS2802-1 *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10252EJ01V0DS 3 PS2802-1,PS2802-4 ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherw ise specified) Parameter Symbol Ratings PS2802-1 Diode Forward Current (DC) Reverse Voltage Power Dissipation Derating Power Dissipation Peak Forward Current Transistor *1 Unit PS2802-4 50 6 mA V 0.8 80 1 40 6 mW/°C mW/ch A V V 100 1.2 120 mA/ch mW/°C mW/ch Vr.m.s. °C °C IF VR ∆PD/°C PD IFP VCEO VECO IC 0.6 60 Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation 90 ∆PC/°C PC BV TA Tstg Isolation Voltage *2 2 500 −55 to +100 −55 to +150 Operating Ambient Temperature Storage Temperature *1 PW = 100 µs, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output 4 Data Sheet PN10252EJ01V0DS PS2802-1,PS2802-4 ELECTRICAL CHARACTERISTICS (TA = 25 °C) Parameter Diode Forward Voltage Reverse Current Terminal Capacitance Transistor Coupled Collector to Emitter Dark Current Current Transfer Ratio *1 (IC/IF) Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time Fall Time *2 Symbol VF IR Ct ICEO CTR VCE(sat) RI-O CI-O tr tf IF = 5 m A VR = 5 V Conditions MIN. TYP. 1.1 MAX. 1.4 5 Unit V µA pF V = 0 V, f = 1.0 MHz VCE = 40 V, IF = 0 mA IF = 1 mA, VCE = 2 V IF = 1 mA, IC = 2 mA VI-O = 1.0 kVDC V = 0 V, f = 1.0 MHz VCC = 5 V, IC = 2 mA, RL = 100 Ω 10 11 15 400 200 2 000 1.0 nA % V Ω 0.4 200 200 pF µs *2 *1 CTR rank (PS2802-1 only) K : 2 000 to (%) L : 700 to 3 400 (%) M : 200 to 1 000 (%) N : 200 to (%) *2 Test circuit for switching time Pulse Input PW = 1 ms Duty Cycle = 1/10 Vout 50 Ω RL = 100 Ω VCC IF Data Sheet PN10252EJ01V0DS 5 PS2802-1,PS2802-4 TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherw ise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 120 100 80 60 40 20 PS2802-1 PS2802-4 100 Diode Power Dissipation PD (mW) 80 PS2802-4 0.8 mW/˚C PS2802-1 60 1.2 mW/˚C 40 0.6 mW/˚C 20 0 25 50 75 100 0 25 50 75 100 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) FORWARD CURRENT vs. FORWARD VOLTAGE 100 50 Forward Current IF (mA) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 160 140 Collector Current IC (mA) TA = +100 ˚C +60 ˚C +25 ˚C 120 100 80 60 40 5 mA 10 5 0 ˚C –25 ˚C –50 ˚C 2 mA 1 0.5 1 mA 20 IF = 0.5 mA 2 4 6 8 10 0.1 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 0 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE Collector to Emitter Dark Current ICEO (nA) COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 200 IF = 10 mA 5 mA 1 mA 0.5 mA 100 10 000 VCE = 2 V 5V 10 V 24 V 40 V Collector Current IC (mA) 50 1 000 10 5 100 0.2 mA 1 0.5 0.2 0.1 mA 10 1 –50 –25 0 25 50 75 100 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Ambient Temperature TA (˚C) Collector Saturation Voltage VCE(sat) (V) 6 Data Sheet PN10252EJ01V0DS NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE Normalized Current Transfer Ratio CTR 1.4 1.2 1.0 0.8 0.6 0.4 0.2 –50 10 000 Switching Time t (µ s) 1 000 100 10 1 10 000 Switching Time t (µs) Normalized Gain Gv 1 000 100 ;; ; 8 000 7 000 6 000 5 000 4 000 3 000 2 000 1 000 Current Transfer Ratio CTR (%) PS2802-1,PS2802-4 CURRENT TRANSFER RATIO vs. FORWARD CURRENT VCE = 2 V Sample A B C D Normalized to 1.0 at TA = 25 ˚C, IF = 1 mA, VCE = 2 V 50 75 –25 0 25 100 0 0.1 0.5 1 5 10 30 Ambient Temperature TA (˚C) Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE CURRENT TRANSFER RATIO vs. FORWARD CURRENT 3 000 2 500 2 000 1 500 1 000 500 0 tf tr Current Transfer Ratio CTR (%) VCC = 5 V, IC = 2 mA, CTR = 1 910 % VCE = 2 V ts td Sample A B C D 0.1 0.5 1.0 5.0 10 50 100 500 Load Resistance RL (kΩ) Forward Current IF (µA) SWITCHING TIME vs. LOAD RESISTANCE FREQUENCY RESPONSE IF = 1 mA, VCE = 2 V VCC = 5 V, IF = 1 mA, CTR = 1 910 % tf 0 ts –5 –10 –15 –20 tr 10 td 1 0.1 RL = 100 Ω 1.0 10 100 0.2 0.5 1 2 5 10 2 0 50 100 200 Load Resistance RL (kΩ) Frequency f (kHz) Data Sheet PN10252EJ01V0DS 7 PS2802-1,PS2802-4 LONG TERM CTR DEGRADATION 1.2 IF = 1 mA 1.0 TA = 25 ˚C CTR (Relative Value) 0.8 60 ˚C 0.6 0.4 0.2 0.0 10 102 103 104 105 106 Time (Hr) Remark The graphs indicate nominal characteristics. 8 Data Sheet PN10252EJ01V0DS PS2802-1,PS2802-4 TAPING SPECIFICATIONS (UNIT: mm) Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 φ 1.5+0.1 –0 7.55±0.1 2.8 MAX. 7.5±0.1 16.0±0.3 0.3 1.55±0.1 4.0±0.1 2.85±0.1 2.3±0.1 Tape Direction PS2802-1-F3 PS2802-1-F4 2003 2003 2003 2003 Outline and Dimensions (Reel) 2.0±0.5 φ 330±2.0 2.0±0.5 φ13.0±0.2 R 1.0 φ 21.0±0.8 φ 100±1.0 2003 2003 Packing: 3 500 pcs/reel 2003 2003 2003 2003 17.5±1.0 21.5±1.0 15.9 to 19.4 Outer edge of flange Data Sheet PN10252EJ01V0DS 9 PS2802-1,PS2802-4 Outline and Dimensions (Tape) 2.0±0.1 4.0±0.1 1.75±0.1 φ 1.5+0.1 –0 2.8 MAX. 7.5±0.1 16.0±0.3 10.7±0.1 1.55±0.1 12.0±0.1 8.3±0.1 0.3 2.3±0.1 Tape Direction PS2802-4-F3 PS2802-4-F4 Outline and Dimensions (Reel) 2.0±0.5 φ 330±2.0 2.0±0.5 φ13.0±0.2 R 1.0 φ 21.0±0.8 φ 100±1.0 17.5±1.0 21.5±1.0 Packing: 2 500 pcs/reel 15.9 to 19.4 Outer edge of flange 10 Data Sheet PN10252EJ01V0DS PS2802-1,PS2802-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature • Time of peak reflow temperature • Time of temperature higher than 220°C • Time to preheat temperature from 120 to 180°C • Number of reflows • Flux 260°C or below (package surface temperature) 10 seconds or less 60 seconds or less 120±30 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (˚C) (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature • Time • Preheating conditions • Number of times • Flux 260°C or below (molten solder temperature) 10 seconds or less 120°C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. Data Sheet PN10252EJ01V0DS 11 PS2802-1,PS2802-4 USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. 12 Data Sheet PN10252EJ01V0DS PS2802-1,PS2802-4 PROGRAMMABLE LOGIC CONTROLLERS EXAMPLE Purpose: In-out interface Xaxis Ya xis Servo Motor Servo Motor Controller Sensor Amplifier Motor Controller Heater Controller Pulse Generator COM PS2802–1 PS2802–4 PD4050 AC.DC Servo Motor Driver Unit M TG PG Pulse Motor Driver Unit M CRT Computer Terminal PC Terminal Printer Power Supply Programmable Logic Controller Printer FDD Controller Memory Cassette Data Sheet PN10252EJ01V0DS 13 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.