Data Sheet
PS2806-1,PS2806-4
R08DS0176EJ0100
Rev.1.00
Aug 30, 2019
HIGH ISOLATION VOLTAGE AC INPUT, DARLINGTON TRANSISTOR TYPE SSOP PHOTOCOUPLER
DESCRIPTION
The PS2806-1 and PS2806-4 are optically coupled isolators containing a GaAs light emitting diode and an
NPN silicon darlington connected phototransistor in a plastic SSOP for high density applications.
This package has shield effect to cut off ambient light.
FEATURES
High isolation voltage (BV = 2 500 Vr.m.s.)
Small and thin package (4, 16-pin SSOP, Pin pitch 1.27 mm)
AC input response
High current transfer ratio (CTR = 2 000% TYP. @ IF = ±1 mA, VCE = 2 V)
Ordering number of tape product: PS2806-1-F3, PS2806-4-F3
Pb-Free product
Safety standards
UL approved: UL1577, Single protection
CSA approved: CAN/CSA-C22.2 No. 62368-1, Basic insulation
BSI approved: BS EN 62368-1, Basic/Supplementary insulation
VDE approved: DIN EN 60747-5-5 (Option)
PIN CONNECTION
(Top View)
PS2806-1
4 3
1. Anode, Cathode
2. Cathode, Anode
3. Emitter
4. Collector
1 2
PS2806-4
16 15 14 13 12 11 10 9
APPLICATIONS
Programmable logic controllers
Measuring instruments
Power supply
Hybrid IC
R08DS0176EJ0100 Rev.1.00
Aug 30, 2019
1 2 3 4 5 6 7 8
1. 3. 5. 7.
2. 4. 6. 8.
9. 11. 13. 15.
10. 12. 14. 16.
Anode, Cathode
Cathode, Anode
Emitter
Collector
Page 1 of 15
PS2806-1, PS2806-4
PACKAGE DIMENSIONS (UNIT: mm)
PS2806-1
PS2806-4
2.7±0.3
7.0±0.3
4.4
4.4
2.0+0.3
–0.2
0.15+0.10
–0.05
7.0±0.3
0.15+0.10
–0.05
2.0±0.1
0.1±0.1
10.3±0.3
0.1±0.1
0.5±0.3
1.27
0.4±0.1
0.12 M
0.40+0.10
–0.05
0.12 M
1.27
0.5±0.3
PHOTOCOUPLER CONSTRUCTION
Parameter
Unit (MIN.)
Air Distance
4.5 mm
Creepage Distance
Isolation Thickness
4.5 mm
0.1 mm
R08DS0176EJ0100 Rev.1.00
Aug 30, 2019
Page 2 of 15
PS2806-1, PS2806-4
MARKING EXAMPLE
PS2806-1
Company initial
Made in Japan
R06
301
"
" :Made in Japan
Last 2 number of type
No. : 06
Assembly Lot
301
Week Assembled
Year Assembled (Last 1 digit)
PS2806-4
Company initial
R
Country Assembled
Type Number
Assembly Lot
PS2806-4
NL301
No. 1 pin
Mark
N L 3 01
Week Assembled
Year Assembled
(Last 1 Digit)
In-house Code
(L: Pb-Free)
Rank Code
R08DS0176EJ0100 Rev.1.00
Aug 30, 2019
Page 3 of 15
PS2806-1, PS2806-4
ORDERING INFORMATION
Part Number
Order Number
PS2806-1
PS2806-1-A
PS2806-1-F3
Solder Plating
Specification
Approval
Application Part
Number*1
50 pcs (Tape 50 pcs cut)
Standard products
PS2806-1-F3-A
Embossed Tape 3 500 pcs/reel
(UL, BSI, CSA
PS2806-4
PS2806-4-A
10 pcs (Tape 10 pcs cut)
approved)
PS2806-4
PS2806-4-F3
PS2806-4-F3-A
Embossed Tape 2 500 pcs/reel
PS2806-1-V
PS2806-1-V-A
50 pcs (Tape 50 pcs cut)
UL, BSI, CSA,
PS2806-1
PS2806-1-V-F3
PS2806-1-V-F3-A
Embossed Tape 3 500 pcs/reel
DIN EN 60747-5-5
PS2806-4-V
PS2806-4-V-A
10 pcs (Tape 10 pcs cut)
approved
PS2806-4-V-F3
PS2806-4-V-F3-A
Embossed Tape 2 500 pcs/reel
Note:
*1.
Pb-Free
Safety Standard
Packing Style
PS2806-1
PS2806-4
For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified)
Parameter
Symbol
Ratings
PS2806-1
Diode
Forward Current (DC)
Power Dissipation
mA/ch
PD/C
0.6
0.8
mW/C
PD
60
80
mW/ch
IFP
1
A/ch
Collector to Emitter Voltage
VCEO
40
V
Emitter to Collector Voltage
VECO
6
V
Peak Forward Current
Transistor
PS2806-4
50
IF
Power Dissipation Derating
Unit
*1
Collector Current
IC
90
100
mA/ch
PC/C
1.2
mW/C
PC
120
mW/ch
BV
2 500
Vr.m.s.
Operating Ambient Temperature
TA
55 to +100
C
Storage Temperature
Tstg
55 to +150
C
Power Dissipation Derating
Power Dissipation
Isolation Voltage
Notes:
*1.
*2.
*2
PW = 100 s, Duty Cycle = 1%
AC voltage for 1 minute at TA = 25C, RH = 60% between input and output.
Pins 1-2 shorted together, 3-4 shorted together (PS2806-1).
Pins 1-8 shorted together, 9-16 shorted together (PS2806-4).
R08DS0176EJ0100 Rev.1.00
Aug 30, 2019
Page 4 of 15
PS2806-1, PS2806-4
ELECTRICAL CHARACTERISTICS (TA = 25C)
Parameter
Diode
Symbol
Conditions
MIN.
TYP.
MAX.
Unit
1.4
V
Forward Voltage
VF
IF = 5 mA
1.1
Terminal Capacitance
30
Ct
V = 0 V, f = 1.0 MHz
Transistor
Collector to Emitter
Dark Current
ICEO
VCE = 40 V, IF = 0 mA
Coupled
Current Transfer Ratio
(IC/IF)
CTR
IF = 1 mA, VCE = 2 V
200
2 000
CTR Ratio *1
CTR1/
CTR2
IF = 1 mA, VCE = 2 V
0.3
1.0
Collector Saturation
Voltage
VCE(sat)
IF = 1 mA, IC = 2 mA
Isolation Resistance
RI-O
VI-O = 1.0 kVDC
Isolation Capacitance
CI-O
V = 0 V, f = 1.0 MHz
0.4
pF
VCC = 5 V, IC = 2 mA, RL = 100
200
s
Rise Time *2
Fall Time
tr
*2
pF
400
%
3.0
1.0
V
1011
tf
nA
200
Notes: *1. CTR1 = IC1/IF1, CTR2 = IC2/IF2
IC1
IF1
IC2
VCE
IF2
*2.
Test circuit for switching time
Pulse Input
IF
VCC
Input
ton
td
PW = 1 ms
Duty Cycle = 1/10
toff
ts
90%
50 Ω
VOUT
RL = 100 Ω
Output
10%
tr
R08DS0176EJ0100 Rev.1.00
Aug 30, 2019
tf
Page 5 of 15
PS2806-1, PS2806-4
TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified)
DIODE POWER DISSIPATION vs.
AMBIENT TEMPERATURE
TRANSISTOR POWER DISSIPATION
vs. AMBIENT TEMPERATURE
120
Transistor Power Dissipation PC (mW)
Diode Power Dissipation PD (mW)
100
PS2806-4
80
60
0.8 mW/°C
PS2806-1
40
0.6 mW/°C
20
0
25
50
75
100
100
PS2806-1
PS2806-4
80
60
1.2 mW/°C
40
20
0
25
100
FORWARD CURRENT vs.
FORWARD VOLTAGE
FORWARD CURRENT vs.
FORWARD VOLTAGE
100
80
50
60
TA = +100 °C
+60 °C
+25 °C
10
Forward Current I F (mA)
Forward Current I F (mA)
75
Ambient Temperature TA (°C)
Ambient Temperature TA (°C)
5
0 °C
–25 °C
–55 °C
1
0.5
40
20
0
–20
–40
–60
0.1
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
–80
1.5
–1.5
–1.0
Forward Voltage V F (V)
–0.5
0
0.5
10 000
VCE = 2 V
5V
10 V
24 V
40 V
Collector Current I C (mA)
10
1
–25
0
IF = 10 mA
5 mA
1 mA
50
100
–50
25
50
1.5
COLLECTOR CURRENT vs.
COLLECTOR SATURATION VOLTAGE
200
100
1 000
1.0
Forward Voltage V F (V)
COLLECTOR TO EMITTER DARK
CURRENT vs. AMBIENT TEMPERATURE
Collector to Emitter Dark Current I CEO (nA)
50
75
100
Ambient Temperature TA (°C)
0.5 mA
10
5
0.2 mA
1
0.1 mA
0.5
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
Collector Saturation Voltage V CE(sat) (V)
Remark The graphs indicate nominal characteristics.
R08DS0176EJ0100 Rev.1.00
Aug 30, 2019
Page 6 of 15
PS2806-1, PS2806-4
COLLECTOR CURRENT vs.
COLLECTOR TO EMITTER VOLTAGE
NORMALIZED CURRENT TRANSFER
RATIO vs. AMBIENT TEMPERATURE
1.4
160
Normalized Current Transfer Ratio CTR
Collector Current I C (mA)
140
5 mA
120
100
80
2 mA
60
40
1 mA
20
IF = 0.5 mA
0
2
4
6
8
10
1.2
1.0
0.8
0.6
0.4
Normalized to 1.0
at TA = 25 °C,
IF = 1 mA, VCE = 2 V
0.2
0.0
–50
–25
CURRENT TRANSFER RATIO vs.
FORWARD CURRENT
Current Transfer Ratio CTR (%)
Current Transfer Ratio CTR (%)
2 500
6 000
Sample A
B
C
D
3 000
2 000
1 000
0.1
0.5
1
5
10
2 000
Sample A
B
C
D
1 500
1 000
500
0
30
10
SWITCHING TIME vs.
LOAD RESISTANCE
10 000
tf
tr
Swiching Time t (μs)
Switching Time t (μs)
100
500
SWITCHING TIME vs.
LOAD RESISTANCE
VCC = 5 V,
IC = 2 mA,
CTR = 1 910 %
100
50
Forward Current I F (μA)
Forward Current I F (mA)
1 000
100
VCE = 2 V
7 000
10 000
75
3 000
VCE = 2 V
0
50
CURRENT TRANSFER RATIO vs.
FORWARD CURRENT
8 000
4 000
25
Ambient Temperature TA (°C)
Collector to Emitter Voltage V CE (V)
5 000
0
ts
td
10
1 000
VCC = 5 V,
IF = 1 mA,
CTR = 1 910 %
tf
ts
100
tr
10
td
1
0.1
0.5
1.0
5.0
Load Resistance R L (kΩ)
1
0.1
1.0
10
100
Load Resistance R L (kΩ)
Remark The graphs indicate nominal characteristics.
R08DS0176EJ0100 Rev.1.00
Aug 30, 2019
Page 7 of 15
PS2806-1, PS2806-4
TAPING SPECIFICATIONS (UNIT: mm)
Tape Direction
PS2806-1-F3
Direction of feed
1.5+0.1
–0
7.5±0.1
4.0±0.1
2.8 MAX.
16.0±0.3
2.0±0.1
7.55±0.1
1.75±0.1
Outline and Dimensions (Tape)
0.3
1.55±0.1
2.3±0.1
2.85±0.1
4.0±0.1
Outline and Dimensions (Reel)
2.0±0.5
R 1.0
100±1.0
330±2.0
2.0±0.5
13.0±0.2
21.0±0.8
17.5±1.0
21.5±1.0
Packing: 3 500 pcs/reel
R08DS0176EJ0100 Rev.1.00
Aug 30, 2019
Page 8 of 15
PS2806-1, PS2806-4
Tape Direction
PS2806-4-F3
Direction of feed
1.55±0.1
2.8 MAX.
10.7±0.1
7.5±0.1
1.5+0.1
–0
16.0±0.3
2.0±0.1
4.0±0.1
1.75±0.1
Outline and Dimensions (Tape)
0.3
2.3±0.1
8.3±0.1
12.0±0.1
Outline and Dimensions (Reel)
2.0±0.5
R 1.0
100±1.0
330±2.0
2.0±0.5
13.0±0.2
21.0±0.8
17.5±1.0
21.5±1.0
Packing: 2 500 pcs/reel
R08DS0176EJ0100 Rev.1.00
Aug 30, 2019
Page 9 of 15
PS2806-1, PS2806-4
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
Remark All dimensions in this figure must be evaluated before use.
R08DS0176EJ0100 Rev.1.00
Aug 30, 2019
Page 10 of 15
PS2806-1, PS2806-4
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared reflow soldering
• Peak reflow temperature
260C or below (package surface temperature)
• Time of peak reflow temperature
10 seconds or less
• Time of temperature higher than 220C
60 seconds or less
• Time to preheat temperature from 120 to 180C 12030 s
• Number of reflows
Three
• Flux
Rosin flux containing small amount of chlorine
(The flux with a maximum chlorine content of
0.2 Wt% is recommended.)
Package Surface Temperature T (C)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
260C MAX.
220C
to 60 s
180C
120C
120±30 s
(preheating)
Time (s)
(2) Wave soldering
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
260C or below (molten solder temperature)
10 seconds or less
120C or below (package surface temperature)
One (Allowed to be dipped in solder including plastic mold portion.)
Rosin flux containing small amount of chlorine (The flux with a maximum
chlorine content of 0.2 Wt% is recommended.)
(3) Soldering by Soldering Iron
• Peak Temperature (lead part temperature) 350C or below
• Time (each pins)
3 seconds or less
• Flux
Rosin flux containing small amount of chlorine
(The flux with a maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(4) Cautions
•Flux Cleaning
Avoid cleaning with Freon based or halogen-based (chlorinated etc.) solvents.
•Do not use fixing agents or coatings containing halogen-based substances.
R08DS0176EJ0100 Rev.1.00
Aug 30, 2019
Page 11 of 15
PS2806-1, PS2806-4
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the
absolute maximum ratings.
3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler
Check the setting values before use, since the forward current conditions at CTR measurement differ
according to product.
When using products other than at the specified forward current, the characteristics curves may differ
from the standard curves due to CTR value variations or the like. This tendency may sometimes be
obvious, especially below IF = 1 mA.
Therefore, check the characteristics under the actual operating conditions and thoroughly take variations
or the like into consideration before use.
USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
R08DS0176EJ0100 Rev.1.00
Aug 30, 2019
Page 12 of 15
PS2806-1, PS2806-4
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter
Symbol
Climatic test class (IEC 60068-1/DIN EN 60068-1)
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and
random test)
Upr = 1.6 UIORM, Pd 5 pC
Rating
Unit
55/100/21
UIORM
Upr
705
1 128
Vpeak
Vpeak
Test voltage (partial discharge test, procedure b for all devices)
Upr = 1.875 UIORM, Pd 5 pC
Upr
1 322
Vpeak
Highest permissible overvoltage
UTR
6 000
Vpeak
CTI
175
Degree of pollution (IEC 60664-1/DIN EN 60664-1 (VDE 0110-1)
Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303-11))
2
Material group (IEC 60664-1/DIN EN 60664-1 (VDE 0110-1))
III a
Storage temperature range
Tstg
55 to +150
C
Operating temperature range
TA
55 to +100
C
Ris MIN.
Ris MIN.
1012
1011
Tsi
Isi
Psi
150
300
500
C
mA
mW
Ris MIN.
109
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25C
VIO = 500 V dc at TA MAX. at least 100C
Safety maximum ratings (maximum permissible in case of fault, see
thermal derating curve)
Package temperature
Current (input current IF, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
VIO = 500 V dc at TA = Tsi
Dependence of maximum safety ratings with package temperature
R08DS0176EJ0100 Rev.1.00
Aug 30, 2019
Page 13 of 15
PS2806-1, PS2806-4
Method a) Destructive Test, Type and Sample Test
Method b) Non-destructive Test, 100% Production Test
R08DS0176EJ0100 Rev.1.00
Aug 30, 2019
Page 14 of 15
PS2806-1, PS2806-4
Caution
GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
All trademarks and registered trademarks are the property of their respective owners.
R08DS0176EJ0100 Rev.1.00
Aug 30, 2019
Page 15 of 15
Notice
1.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for
the incorporation or any other use of the circuits, software, and information in the design of your product or system. Renesas Electronics disclaims any and all liability for any losses and damages incurred by
you or third parties arising from the use of these circuits, software, or information.
2.
Renesas Electronics hereby expressly disclaims any warranties against and liability for infringement or any other claims involving patents, copyrights, or other intellectual property rights of third parties, by or
arising from the use of Renesas Electronics products or technical information described in this document, including but not limited to, the product data, drawings, charts, programs, algorithms, and application
examples.
3.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others.
4.
You shall not alter, modify, copy, or reverse engineer any Renesas Electronics product, whether in whole or in part. Renesas Electronics disclaims any and all liability for any losses or damages incurred by
5.
Renesas Electronics products are classified according to the following two quality grades: “Standard” and “High Quality”. The intended applications for each Renesas Electronics product depends on the
you or third parties arising from such alteration, modification, copying or reverse engineering.
product’s quality grade, as indicated below.
"Standard":
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic
equipment; industrial robots; etc.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control (traffic lights); large-scale communication equipment; key financial terminal systems; safety control equipment; etc.
Unless expressly designated as a high reliability product or a product for harsh environments in a Renesas Electronics data sheet or other Renesas Electronics document, Renesas Electronics products are
not intended or authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems; surgical implantations; etc.), or may cause
serious property damage (space system; undersea repeaters; nuclear power control systems; aircraft control systems; key plant systems; military equipment; etc.). Renesas Electronics disclaims any and all
liability for any damages or losses incurred by you or any third parties arising from the use of any Renesas Electronics product that is inconsistent with any Renesas Electronics data sheet, user’s manual or
other Renesas Electronics document.
6.
When using Renesas Electronics products, refer to the latest product information (data sheets, user’s manuals, application notes, “General Notes for Handling and Using Semiconductor Devices” in the
reliability handbook, etc.), and ensure that usage conditions are within the ranges specified by Renesas Electronics with respect to maximum ratings, operating power supply voltage range, heat dissipation
characteristics, installation, etc. Renesas Electronics disclaims any and all liability for any malfunctions, failure or accident arising out of the use of Renesas Electronics products outside of such specified
ranges.
7.
Although Renesas Electronics endeavors to improve the quality and reliability of Renesas Electronics products, semiconductor products have specific characteristics, such as the occurrence of failure at a
certain rate and malfunctions under certain use conditions. Unless designated as a high reliability product or a product for harsh environments in a Renesas Electronics data sheet or other Renesas
Electronics document, Renesas Electronics products are not subject to radiation resistance design. You are responsible for implementing safety measures to guard against the possibility of bodily injury, injury
or damage caused by fire, and/or danger to the public in the event of a failure or malfunction of Renesas Electronics products, such as safety design for hardware and software, including but not limited to
redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult
and impractical, you are responsible for evaluating the safety of the final products or systems manufactured by you.
8.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. You are responsible for carefully and
sufficiently investigating applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive, and using Renesas Electronics
products in compliance with all these applicable laws and regulations. Renesas Electronics disclaims any and all liability for damages or losses occurring as a result of your noncompliance with applicable
laws and regulations.
9.
Renesas Electronics products and technologies shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws
or regulations. You shall comply with any applicable export control laws and regulations promulgated and administered by the governments of any countries asserting jurisdiction over the parties or
transactions.
10. It is the responsibility of the buyer or distributor of Renesas Electronics products, or any other party who distributes, disposes of, or otherwise sells or transfers the product to a third party, to notify such third
party in advance of the contents and conditions set forth in this document.
11. This document shall not be reprinted, reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products.
(Note 1)
“Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its directly or indirectly controlled subsidiaries.
(Note 2)
“Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
(Rev.4.0-1 November 2017)
http://www.renesas.com
SALES OFFICES
Refer to "http://www.renesas.com/" for the latest and detailed information.
Renesas Electronics Corporation
TOYOSU FORESIA, 3-2-24 Toyosu, Koto-ku, Tokyo 135-0061, Japan
Renesas Electronics America Inc.
1001 Murphy Ranch Road, Milpitas, CA 95035, U.S.A.
Tel: +1-408-432-8888, Fax: +1-408-434-5351
Renesas Electronics Canada Limited
9251 Yonge Street, Suite 8309 Richmond Hill, Ontario Canada L4C 9T3
Tel: +1-905-237-2004
Renesas Electronics Europe GmbH
Arcadiastrasse 10, 40472 Düsseldorf, Germany
Tel: +49-211-6503-0, Fax: +49-211-6503-1327
Renesas Electronics (China) Co., Ltd.
Room 101-T01, Floor 1, Building 7, Yard No. 7, 8th Street, Shangdi, Haidian District, Beijing 100085, China
Tel: +86-10-8235-1155, Fax: +86-10-8235-7679
Renesas Electronics (Shanghai) Co., Ltd.
Unit 301, Tower A, Central Towers, 555 Langao Road, Putuo District, Shanghai 200333, China
Tel: +86-21-2226-0888, Fax: +86-21-2226-0999
Renesas Electronics Hong Kong Limited
Unit 1601-1611, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong
Tel: +852-2265-6688, Fax: +852 2886-9022
Renesas Electronics Taiwan Co., Ltd.
13F, No. 363, Fu Shing North Road, Taipei 10543, Taiwan
Tel: +886-2-8175-9600, Fax: +886 2-8175-9670
Renesas Electronics Singapore Pte. Ltd.
80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre, Singapore 339949
Tel: +65-6213-0200, Fax: +65-6213-0300
Renesas Electronics Malaysia Sdn.Bhd.
Unit No 3A-1 Level 3A Tower 8 UOA Business Park, No 1 Jalan Pengaturcara U1/51A, Seksyen U1, 40150 Shah Alam, Selangor, Malaysia
Tel: +60-3-5022-1288, Fax: +60-3-5022-1290
Renesas Electronics India Pvt. Ltd.
No.777C, 100 Feet Road, HAL 2nd Stage, Indiranagar, Bangalore 560 038, India
Tel: +91-80-67208700
Renesas Electronics Korea Co., Ltd.
17F, KAMCO Yangjae Tower, 262, Gangnam-daero, Gangnam-gu, Seoul, 06265 Korea
Tel: +82-2-558-3737, Fax: +82-2-558-5338
© 2019 Renesas Electronics Corporation. All rights reserved.
Colophon 8.0