PS2811-1-V-F3-L-A

PHOTOCOUPLER PS2811-1,PS2811-4 LOW INPUT CURRENT, HIGH CTR 4, 16-PIN SSOP PHOTOCOUPLER NEPOC Series DESCRIPTION The PS2811-1 and PS2811-4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor in a plastic SSOP for high density applications. The package is a Shrink SOP (Small Outline Package) type for high density mounting applications. FEATURES • High current transfer ratio (CTR = 200% TYP. @ IF = 1 mA) • High isolation voltage (BV = 2 500 Vr.m.s.) • Small and thin package (4, 16-pin SSOP, Pin pitch 1.27 mm) • Ordering number of tape product: PS2811-1-F3, F4, PS2811-4-F3, F4 • Pb-Free product • Safety standards: PS2811-1, -4 • UL approved: File No. E72422 • DIN EN60747-5-2 (VDE0884 Part2) approved (Option) APPLICATIONS • Programmable logic controllers • Small power supply • Hybrid IC • Modem/FAX Document No. PN10255EJ03V0DS (3rd edition) Date Published May 2006 NS CP(K) The mark shows major revised points. The revised points can be easily searched by copying an "" in the PDF file and specifying it in the "Find what:" field. PS2811-1,PS2811-4 PACKAGE DIMENSIONS (UNIT: mm) MARKING EXAMPLE 2 Data Sheet PN10255EJ03V0DS PS2811-1,PS2811-4 ORDERING INFORMATION Part Number Order Number PS2811-1 PS2811-1-A PS2811-1-F3 PS2811-1-F3-A PS2811-1-F4 PS2811-1-F4-A PS2811-1-V Solder Plating Specification Pb-Free Packing Style Safety Standard Approval 50 pcs (Tape 50 pcs cut) Standard products Embossed Tape 3 500 pcs/reel (UL approved) PS2811-1-V-A 50 pcs (Tape 50 pcs cut) DIN EN60747-5-2 PS2811-1-V-F3 PS2811-1-V-F3-A Embossed Tape 3 500 pcs/reel (VDE0884 Part2) PS2811-1-V-F4 PS2811-1-V-F4-A PS2811-4 PS2811-4-A Magazine Case 45 pcs Standard products PS2811-4-F3 PS2811-4-F3-A Embossed Tape 2 500 pcs/reel (UL approved) PS2811-4-F4 PS2811-4-F4-A PS2811-4-V PS2811-4-V-A Magazine Case 45 pcs DIN EN60747-5-2 PS2811-4-V-F3 PS2811-4-V-F3-A Embossed Tape 2 500 pcs/reel (VDE0884 Part2) PS2811-4-V-F4 PS2811-4-V-F4-A Application *1 Part Number PS2811-1 Approved (Option) PS2811-4 Approved (Option) *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10255EJ03V0DS 3 PS2811-1,PS2811-4 ABSOLUTE MAXIMUM RATINGS (T A = 25 C, unless otherwise specified) Ratings Parameter Symbol Unit PS2811-1 Diode PS2811-4 Forward Current (DC) IF 50 mA/ch Reverse Voltage VR 6 V Power Dissipation Derating Power Dissipation Peak Forward Current *1 PD/ C 0.6 0.7 mW/ C PD 60 70 mW/ch IFP 1.0 A/ch Collector to Emitter Voltage VCEO 40 V Emitter to Collector Voltage VECO 5 V IC 40 mA/ch PC/ C 1.2 mW/ C PC 120 mW/ch Isolation Voltage BV 2 500 Vr.m.s. Operating Ambient Temperature TA 55 to +100 C Storage Temperature Tstg 55 to +150 C Transistor Collector Current Power Dissipation Derating Power Dissipation *2 *1 PW = 100 s, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25 C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together (PS2811-1). Pins 1-8 shorted together, 9-16 shorted together (PS2811-4). 4 Data Sheet PN10255EJ03V0DS PS2811-1,PS2811-4 ELECTRICAL CHARACTERISTICS (T A = 25 C) Diode Transistor Parameter Symbol Conditions Forward Voltage VF IF = 5 mA Reverse Current IR VR = 5 V Terminal Capacitance Ct V = 0 V, f = 1 MHz Collector to Emitter Dark ICEO IF = 0 mA, VCE = 40 V CTR IF = 1 mA, VCE = 5 V MIN. TYP. MAX. Unit 1.15 1.4 V 5 A 15 pF 100 nA 400 % 0.3 V Current Coupled Current Transfer Ratio *1 (IC/IF) Collector Saturation Voltage VCE (sat) RI-O VI-O = 1 kVDC Isolation Capacitance CI-O V = 0 V, f = 1 MHz Rise Time *2 Fall Time tr 200 IF = 1 mA, IC = 0.2 mA Isolation Resistance *2 100 VCC = 5 V, IC = 2 mA, RL = 100 tf 1011 0.4 pF 4 s 5 *1 CTR rank PS2811-1 N : 100 to 400 (%) K : 200 to 400 (%) L : 150 to 300 (%) M: 100 to 200 (%) PS2811-4 N : 100 to 400 (%) *2 Test circuit for switching time Data Sheet PN10255EJ03V0DS 5 PS2811-1,PS2811-4 TYPICAL CHARACTERISTICS (T A = 25 C, unless otherwise specified) Remark The graphs indicate nominal characteristics. 6 Data Sheet PN10255EJ03V0DS PS2811-1,PS2811-4 Remark The graphs indicate nominal characteristics. Data Sheet PN10255EJ03V0DS 7 PS2811-1,PS2811-4 TAPING SPECIFICATIONS (UNIT: mm) 8 Data Sheet PN10255EJ03V0DS PS2811-1,PS2811-4 Data Sheet PN10255EJ03V0DS 9 PS2811-1,PS2811-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature 260 C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220 C 60 seconds or less • Time to preheat temperature from 120 to 180 C 120 30 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (2) Wave soldering • Temperature 260 C or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120 C or below (package surface temperature) • Number of times One (Allowed to be dipped in solder including plastic mold portion.) • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron • Peak Temperature (lead part temperature) 350 C or below • Time (each pins) 3 seconds or less • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) Please be sure that the temperature of the package would not be heated over 100 C 10 Data Sheet PN10255EJ03V0DS PS2811-1,PS2811-4 (4) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. 3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler Check the setting values before use, since the forward current conditions at CTR measurement differ according to product. When using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to CTR value variations or the like. Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10255EJ03V0DS 11 PS2811-1,PS2811-4 12 Data Sheet PN10255EJ03V0DS PS2811-1,PS2811-4 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. • Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. • Do not burn, destroy, cut, crush, or chemically dissolve the product. • Do not lick the product or in any way allow it to enter the mouth.