PS2911-1-K-A

Data Sheet PS2911-1 HIGH CTR, 4-PIN ULTRA SMALL PACKAGE FLAT-LEAD PHOTOCOUPLER R08DS0110EJ0402 Rev.4.02 Dec 6, 2021 DESCRIPTION The PS2911-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor in one package for high density mounting applications. An ultra small flat-lead package has been provided which realizes a reduction in mounting area of about 30% compared with the PS28xx series. FEATURES • • • • • Ultra small flat-lead package (4.6 (L) × 2.5 (W) × 2.1 (H) mm) High current transfer ratio (CTR = 200 % TYP. @ IF = 1 mA, VCE = 5 V) High isolation voltage (BV = 2 500 Vr.m.s.) Ordering number of taping product: PS2911-1-F3: 3 500 pcs/reel Safety standards • UL approved: UL1577, Single protection • BSI approved: BS EN 62368-1, Supplementary insulation • VDE approved: DIN EN 60747-5-5 (Option) APPLICATIONS • DC/DC converter • Modem/PC card R08DS0110EJ0402 Rev.4.02 Dec 6, 2021 Page 1 of 13 PS2911-1e PACKAGE DIMENSIONS (UNIT: mm) 2.5±0.3 2 5.0±0.2 0.15 +0.1 –0.05 2.1 MAX. 1 4.6±0.2 R 4.1 MIN. 3 4 0.4±0.1 0.2±0.1 1.27 Weight: 0.05g (typ.) MARKING EXAMPLE PHOTOCOUPLER CONSTRUCTION Parameter Air Distance Creepage Distance Isolation Distance R08DS0110EJ0402 Rev.4.02 Dec 6, 2021 MIN. 4 mm 4 mm 0.4 mm Page 2 of 13 PS2911-1e ORDERING INFORMATION Part Number PS2911-1 PS2911-1-F3 Order Number*1 PS2911-1-AX PS2911-1-F3AX Solder Plating Specification Pb-Free (Ni/Pd/Au) PS2911-1-V PS2911-1-V-AX PS2911-1-V-F3 PS2911-1-V-F3AX Packing Style Safety Standard Approval Application Part Number*2 50 pcs (Tape 50 pcs cut) Embossed Tape 3 500 pcs/reel Standard products (UL, BSI approved) PS2911-1 50 pcs (Tape 50 pcs cut) Embossed Tape 3 500 pcs/reel UL, BSI, DIN EN 60747-5-5 approved Note: *1. When specifying CTR rank, please add “/CTR rank” after Order Number. ex. L rank : PS2911-1-AX/L Note: *2. For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified) Parameter Diode Symbol Ratings Unit IF ∆IF/°C 50 0.5 mA mA/°C IFP 0.5 A PD VR 60 6 mW V Collector to Emitter Voltage Emitter to Collector Voltage VCEO VECO 40 5 V V Collector Current Power Dissipation Derating IC ∆PC/°C 40 1.2 mA mW/°C PC BV 120 2 500 mW Vr.m.s. PT TA 160 −55 to +100 mW °C Tstg −55 to +150 °C Forward Current Forward Current Derating Peak Forward Current *1 Power Dissipation Reverse Voltage Detector Power Dissipation Voltage *2 Isolation Total Power Dissipation Operating Ambient Temperature Storage Temperature Notes: *1. PW = 100 µs, Duty Cycle = 1 % *2. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output. Pins 1-2 shorted together, 3-4 shorted together. R08DS0110EJ0402 Rev.4.02 Dec 6, 2021 Page 3 of 13 PS2911-1e ELECTRICAL CHARACTERISTICS (TA = 25 °C) Parameter Diode Symbol Forward Voltage Reverse Current Transistor Coupled VF IR Conditions IF = 1 mA VR = 5 V Terminal Capacitance Collector to Emitter Dark Current Ct ICEO V = 0 V, f = 1 MHz IF = 0 mA, VCE = 40 V Current Transfer Ratio (IC/IF) *1 Collector Saturation Voltage CTR IF = 1 mA, VCE = 5 V Isolation Resistance Isolation Capacitance RI-O CI-O tr Rise Time *2 Fall Time VCE(SAT) Turn-on Time *2 ton TYP. MAX. Unit 0.9 1.1 1.3 5 V µA 100 pF nA 200 400 % 0.13 0.3 V 15 100 IF = 1 mA, IC = 0.2 mA VI-O = 1 kVDC V = 0 V, f = 1 MHz VCC = 5 V, IC = 2 mA, RL = 100 Ω tf *2 MIN. 1011 0.4 Ω pF 5 µs 10 VCC = 5 V, IF = 1 mA, RL = 5 kΩ 40 Storage Time *2 ts 10 Turn-off Time *2 toff 120 µs Notes: *1. CTR rank N : 100 to 400 (%) K : 200 to 400 (%) L : 150 to 300 (%) M : 100 to 200 (%) *2. Test circuit for switching time R08DS0110EJ0402 Rev.4.02 Dec 6, 2021 Page 4 of 13 PS2911-1e TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE TRANSISTORPOWERDISSIPATION vs. AMBIENT TEMPERATURE 140 Transistor Power Dissipation PC (mW) Maximum Forward Current I F (mA) 80 60 40 0.5 mA/°C 20 50 25 0 75 100 120 100 80 40 20 0 20 100 Collector Current I C (mA) 18 Forward Current I F (mA) 50 75 100 TA = +100°C +60°C +25°C 1 0°C –25°C –50°C CTR= 200% IF = 5 mA 16 14 12 10 8 2 mA 6 4 1 mA 0.5 mA 2 0.01 0.0 0.5 1.0 1.5 0 2.0 10 1 000 Collector Current I C (mA) Collector to Emitter Dark Current I CEO (nA) 10 000 VCE = 20 V 40 V 10 0 25 50 4 6 8 10 COLLECTORCURRENT vs. COLLECTORSATURATION VOLTAGE COLLECTORTO EMITTERDARK CURRENT vs. AMBIENT TEMPERATURE 1 –25 2 Collector to Emitter Voltage VCE (V) Forward Voltage V F (V) 100 125 COLLECTORCURRENT vs. COLLECTORTO EMITTERVOLTAGE FORWARD CURRENT vs. FORWARD VOLTAGE 0.1 25 Ambient Temperature TA (°C) Ambient Temperature TA (°C) 10 1.2 mW/°C 60 75 100 Ambient Temperature TA (°C) CTR= 200% 5 mA 2 mA 1 mA 1 IF = 0.5 mA 0.1 0.0 0.2 0.4 0.6 0.8 1.0 Collector Saturation Voltage VCE(sat) (V) Remark The graphs indicate nominal characteristics. R08DS0110EJ0402 Rev.4.02 Dec 6, 2021 Page 5 of 13 PS2911-1e CURRENT TRANSFER RATIO vs. FORWARD CURRENT 1.4 Current Transfer Ratio CTR (%) 1.2 1.0 0.8 0.6 0.4 Normalized to 1.0 at TA = 25°C, IF = 1 mA, VCE = 5 V 0.2 0.0 –50 10 000 Switching Time t ( μ s) 500 1 000 0 –25 25 50 75 400 VCE = 5 V, n=3 Sample A B C 300 200 100 0 0.1 100 1 100 10 Ambient Temperature TA (°C) Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE FREQUENCY RESPONSE IF = 1 mA, VCC = 5 V, CTR= 200% 0 t off 100 Normalized Gain Gv Normalized Current Transfer Ratio CTR NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE ts t on 10 –5 100 Ω RL = 1 kΩ –10 300 Ω –15 –20 1 1k 10k 100 k 1 000 k Load Resistance RL (Ω) –25 0.1 1 10 100 1 000 Frequency f (kHz) Remark The graphs indicate nominal characteristics. R08DS0110EJ0402 Rev.4.02 Dec 6, 2021 Page 6 of 13 PS2911-1e TAPING SPECIFICATIONS (UNIT: mm) Tape Direction PS29xx-1-F3 1*1 *1 No.1 pin Pull-out direction 2.9 MAX. 5.3± 0.1 ⌀1.5 +0.1 –0 5.5± 0.05 4.0± 0.1 12.0± 0.2 2.0± 0.05 1.75± 0.1 Outline and Dimensions (Tape) 0.3 ⌀1.55±0.05 2.4± 0.1 2.9± 0.1 4.0± 0.1 Outline and Dimensions (Reel) 2.0±0.5 R 1.0 ⌀21.0±0.8 ⌀100±1.0 ⌀13.0±0.2 ⌀330±2.0 2.0±0.5 13.5±1.0 17.5±1.0 Packing: 3 500 pcs/reel R08DS0110EJ0402 Rev.4.02 Dec 6, 2021 Page 7 of 13 PS2911-1e RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) 5.7 4.7 4.14 0.6 (0.35) 1.27 0.8 ( ) : Reference value 24-R0.1 Remark This drawing is considered to meet air and outer creepage distance 4.0 mm minimum. All dimensions in this figure must be evaluated before use. R08DS0110EJ0402 Rev.4.02 Dec 6, 2021 Page 8 of 13 PS2911-1e NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature • Time of peak reflow temperature • Time of temperature higher than 220 °C • Time to preheat temperature from 120 to 180 °C • Number of reflows • Flux (2) Wave soldering • Temperature • Time • Preheating conditions • Number of times • Flux 260 °C or below (package surface temperature) 10 seconds or less 60 seconds or less 120 ± 30 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) 260 °C or below (molten solder temperature) 10 seconds or less 120 °C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron • Peak Temperature (lead part temperature) 350 °C or below • Time (each pins) 3 seconds or less • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) Please be sure that the temperature of the package would not be heated over 100 °C (4) Cautions • Flux Cleaning Avoid cleaning with Freon based or halogen-based (chlorinated etc.) solvents. • Do not use fixing agents or coatings containing halogen-based substances. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. R08DS0110EJ0402 Rev.4.02 Dec 6, 2021 Page 9 of 13 PS2911-1e 3. Measurement conditions of current transfer ratios (CTR), which differ according to photocoupler Check the setting values before use, since the forward current conditions at CTR measurement differ according to product. When using products other than at the specified forward current, the characteristics curves may differ from the standard curves due to CTR value variations or the like. Therefore, check the characteristics under the actual operating conditions and thoroughly take variations or the like into consideration before use. USAGE CAUTIONS 1. 2. 3. 4. Protect against static electricity when handling. Avoid storage at a high temperature and high humidity. Avoid cleaning with Freon based or halogen-based (chlorinated etc.) solvents. Do not use fixing agents or coatings containing halogen-based substances. R08DS0110EJ0402 Rev.4.02 Dec 6, 2021 Page 10 of 13 PS2911-1e SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Climatic test class (IEC 60068-1/DIN EN 60068-1) Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.6 × UIORM, Pd < 5 pC Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 × UIORM, Pd < 5 pC Highest permissible overvoltage Symbol Rating Unit 55/100/21 UIORM Upr 570 912 Vpeak Vpeak Upr 1 068 Vpeak Vpeak UTR 4 000 Degree of pollution (IEC 60664-1/DIN EN 60664-1 (VDE 0110-1) Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303-11)) CTI 2 175 Material group (IEC 60664-1/DIN EN 60664-1 (VDE 0110-1)) Storage temperature range Tstg III a –55 to +150 °C TA –55 to +100 °C Ris MIN. Ris MIN. 1012 1011 Ω Ω Tsi Isi Psi 150 300 500 °C mA mW Ris MIN. 109 Ω Operating temperature range Isolation resistance, minimum value VIO = 500 V dc at TA = 25 °C VIO = 500 V dc at TA MAX. at least 100 °C Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = Tsi Dependence of maximum safety ratings with package temperature R08DS0110EJ0402 Rev.4.02 Dec 6, 2021 Page 11 of 13 PS2911-1e Method a) Destructive Test, Type and Sample Test Method b) Non-destructive Test, 100% Production Test R08DS0110EJ0402 Rev.4.02 Dec 6, 2021 Page 12 of 13 PS2911-1e Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. • Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. • Do not burn, destroy, cut, crush, or chemically dissolve the product. • Do not lick the product or in any way allow it to enter the mouth. All trademarks and registered trademarks are the property of their respective owners. R08DS0110EJ0402 Rev.4.02 Dec 6, 2021 Page 13 of 13 Notice 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation or any other use of the circuits, software, and information in the design of your product or system. Renesas Electronics disclaims any and all liability for any losses and damages incurred by you or third parties arising from the use of these circuits, software, or information. Renesas Electronics hereby expressly disclaims any warranties against and liability for infringement or any other claims involving patents, copyrights, or other intellectual property rights of third parties, by or arising from the use of Renesas Electronics products or technical information described in this document, including but not limited to, the product data, drawings, charts, programs, algorithms, and application examples. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You shall be responsible for determining what licenses are required from any third parties, and obtaining such licenses for the lawful import, export, manufacture, sales, utilization, distribution or other disposal of any products incorporating Renesas Electronics products, if required. You shall not alter, modify, copy, or reverse engineer any Renesas Electronics product, whether in whole or in part. Renesas Electronics disclaims any and all liability for any losses or damages incurred by you or third parties arising from such alteration, modification, copying or reverse engineering. Renesas Electronics products are classified according to the following two quality grades: “Standard” and “High Quality”. The intended applications for each Renesas Electronics product depends on the product’s quality grade, as indicated below. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; industrial robots; etc. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control (traffic lights); large-scale communication equipment; key financial terminal systems; safety control equipment; etc. Unless expressly designated as a high reliability product or a product for harsh environments in a Renesas Electronics data sheet or other Renesas Electronics document, Renesas Electronics products are not intended or authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems; surgical implantations; etc.), or may cause serious property damage (space system; undersea repeaters; nuclear power control systems; aircraft control systems; key plant systems; military equipment; etc.). Renesas Electronics disclaims any and all liability for any damages or losses incurred by you or any third parties arising from the use of any Renesas Electronics product that is inconsistent with any Renesas Electronics data sheet, user’s manual or other Renesas Electronics document. No semiconductor product is absolutely secure. Notwithstanding any security measures or features that may be implemented in Renesas Electronics hardware or software products, Renesas Electronics shall have absolutely no liability arising out of any vulnerability or security breach, including but not limited to any unauthorized access to or use of a Renesas Electronics product or a system that uses a Renesas Electronics product. RENESAS ELECTRONICS DOES NOT WARRANT OR GUARANTEE THAT RENESAS ELECTRONICS PRODUCTS, OR ANY SYSTEMS CREATED USING RENESAS ELECTRONICS PRODUCTS WILL BE INVULNERABLE OR FREE FROM CORRUPTION, ATTACK, VIRUSES, INTERFERENCE, HACKING, DATA LOSS OR THEFT, OR OTHER SECURITY INTRUSION (“Vulnerability Issues”). RENESAS ELECTRONICS DISCLAIMS ANY AND ALL RESPONSIBILITY OR LIABILITY ARISING FROM OR RELATED TO ANY VULNERABILITY ISSUES. FURTHERMORE, TO THE EXTENT PERMITTED BY APPLICABLE LAW, RENESAS ELECTRONICS DISCLAIMS ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THIS DOCUMENT AND ANY RELATED OR ACCOMPANYING SOFTWARE OR HARDWARE, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. When using Renesas Electronics products, refer to the latest product information (data sheets, user’s manuals, application notes, “General Notes for Handling and Using Semiconductor Devices” in the reliability handbook, etc.), and ensure that usage conditions are within the ranges specified by Renesas Electronics with respect to maximum ratings, operating power supply voltage range, heat dissipation characteristics, installation, etc. Renesas Electronics disclaims any and all liability for any malfunctions, failure or accident arising out of the use of Renesas Electronics products outside of such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of Renesas Electronics products, semiconductor products have specific characteristics, such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Unless designated as a high reliability product or a product for harsh environments in a Renesas Electronics data sheet or other Renesas Electronics document, Renesas Electronics products are not subject to radiation resistance design. You are responsible for implementing safety measures to guard against the possibility of bodily injury, injury or damage caused by fire, and/or danger to the public in the event of a failure or malfunction of Renesas Electronics products, such as safety design for hardware and software, including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult and impractical, you are responsible for evaluating the safety of the final products or systems manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. You are responsible for carefully and sufficiently investigating applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive, and using Renesas Electronics products in compliance with all these applicable laws and regulations. Renesas Electronics disclaims any and all liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. Renesas Electronics products and technologies shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. You shall comply with any applicable export control laws and regulations promulgated and administered by the governments of any countries asserting jurisdiction over the parties or transactions. It is the responsibility of the buyer or distributor of Renesas Electronics products, or any other party who distributes, disposes of, or otherwise sells or transfers the product to a third party, to notify such third party in advance of the contents and conditions set forth in this document. This document shall not be reprinted, reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products. (Note1) (Note2) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its directly or indirectly controlled subsidiaries. “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics. (Rev.5.0-1 October 2020) Corporate Headquarters Contact information TOYOSU FORESIA, 3-2-24 Toyosu, Koto-ku, Tokyo 135-0061, Japan For further information on a product, technology, the most up-to-date version of a document, or your nearest sales office, please visit: www.renesas.com/contact/. www.renesas.com Trademarks Renesas and the Renesas logo are trademarks of Renesas Electronics Corporation. All trademarks and registered trademarks are the property of their respective owners. © 2021 Renesas Electronics Corporation. All rights reserved.