PS7142L-1C-E4

8 PIN DIP 400 V BREAKDOWN VOLTAGE, TRANSFER TYPE 2-CH OPTICAL COUPLED MOSFET FEATURES • 2 CHANNEL TYPE: 1a + 1b output • LOW LED OPERATING CURRENT: IF = 2 mA • DESIGNED FOR AC/DC SWITCHING LINE CHANGER • SMALL PACKAGE: 8 Pin DIP • LOW OFFSET VOLTAGE • SURFACE MOUNT TYPE LEAD AVAILABLE: PS7142L-1C PS7142-1C PS7142L-1C DESCRIPTION PS7142-1C and PS7142L-1C are transfer type solid state relays containing normally open (N.O.) contacts and normally closed contacts on the output side. They are suitable for analog signal control because of their low offset and high linearity. APPLICATIONS • EXCHANGE EQUIPMENT • MEASUREMENT EQUIPMENT • FA/OA EQUIPMENT ELECTRICAL CHARACTERISTICS (TA = 25°C) PART NUMBER SYMBOLS PARAMETERS Forward Voltage, IF = 10 mA Reverse Current, VR = 5 V Off-State Leakage Current, N.O.: IF = 0 mA, VD = 400 V N.C.: IF = 10 mA, VD = 400 V COUT IFon IFoff Ron1 Output Capacitance, N.O.: VD = 0 V, f = 1 MHz N.C.: IF = 10 mA, VD = 0 V, f = 1 MHz LED On-state Current, N.O.: IL = 200 mA LED Off-state Current, N.C.: IL = 200 mA On-State Resistance, N.O.: IF = 10 mA, IL = 10 mA N.C.: IF = 0 mA, IL = 10 mA N.O.: IF = 10 mA, IL = 200 mA, t ≤10 ms N.C.: IF = 0 mA, IL = 200 mA, t ≤10 ms Turn-On Time1, IF = 10 mA, VO = 5 V, PW ≥ 10 ms Turn-Off Time1, IF = 10 mA, VO = 5 V, PW ≥ 10 ms Isolation Resistance, Vin-out = 1.0 kVDC Isolation Capacitance, V = 0 V, f = 1 MHz pF/ch pF/ch mA mA Ω 8 7 7 7 0.3 0.03 ms Ω pF/ch 109 1.1 0.03 0.6 140 430 2.0 2.0 12 12 10 10 2.0 0.2 0.2 2.0 UNITS V µA µA 0.03 MIN PS7142-1C, PS7142L-1C TYP 1.2 MAX 1.4 5.0 1.0 Diode VF IR ILoff MOSFET Coupled Ron2 ton (N.O.) ton (N.C.) toff (N.O.) toff (N.C.) Rl-O Cl-O ms Note: 1. Test circuit for Switching Time IF Pulse Input VL Input 50% 0 Input 50% 0 PS7142-1C, PS7142L-1C 8 7 6 5 VO = 5 V 90% VO = 5 V Output 90% Input Monitor Rin RL VO Monitor Output 10% ton toff 10% toff ton 1 2 3 4 California Eastern Laboratories PS7142-1C, PS7142L-1C ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS VR IF PD IFP VL PARAMETERS Reverse Voltage Forward Current (DC) Power Dissipation Peak Forward Current2 Break Down Voltage Continuous Load Current Pulse Load (AC/DC Connection) Power Dissipation Isolation Voltage4 Total Power Dissipation Operating Ambient Temp. Storage Temperature Current3 UNITS V mA mW/ch A V mA mA mW/ch Vr.m.s. mW °C °C RATINGS 5 50 50 1 400 200 400 375 1500 850 -40 to +80 -40 to +100 RECOMMENDED OPERATING CONDITIONS (TA = 25 °C) SYMBOL PARAMETER LED Operating Current LED Off Voltage UNITS MIN TYP MAX mA V 2 0 10 20 0.5 IF VF Diode MOSFET IL ILP PD BV PT TA TSTG ORDERING INFORMATION PART NUMBER PS7142-1C PS7142L-1C PS714L2-1C-E3 PS7142L-1C-E4 Embossed Tape, 1000 pcs/reel PACKAGE 8 Pin DIP PACKING STYLE Magazine case, 50 pcs Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 µs, Duty Cycle = 1% 3. PW = 100 ms, 1 shot. 4. AC voltage for 1 minute at TA = 25 °C, RH = 60% between input and output. TYPICAL PERFORMANCE CURVES (TA = 25 °C) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 100 300 MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE Maximum Forward Current, IF (mA) Maximum Load Current, IL (mA) 80 80 250 200 60 150 40 100 20 50 0 -25 0 25 50 75 100 0 -25 0 25 50 75 80 100 Ambient Temperature, TA (°C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE 1.6 Ambient Temperature, TA (°C) OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 500 f = 1 MHz Output Capacitance, Cout (pF) Forward Voltage, VF (V) 1.4 IF = 50 mA 1.2 30 mA 20 mA 10 mA 5 mA 1.0 1 mA 375 250 N.C. N.O. 125 0.8 -25 0 25 50 75 100 0 20 40 60 80 100 120 Ambient Temperature, TA (°C) Applied Voltage, VD (V) PS7142-1C, PS7142L-1C TYPICAL PERFORMANCE CURVES (TA = 25 °C) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE 10 -5 LOAD CURRENT vs. LOAD VOLTAGE 200 IF = 0 mA Off-state Leakage Current, ILoff (A) IF = 0 mA (N.O.) IF = 10 mA (N.C.) Load Current, IL (mA) 10-6 100 TA = 80°C N.O., N.C. 10-7 -4.0 -2.0 0 2.0 4.0 10-8 TA = 25°C N.O., N.C. 10-9 0 100 200 300 400 500 -100 -200 Load Voltage, VL (V) Applied Voltage, VD (V) TURN-ON TIME vs. FORWARD CURRENT 1.2 VO = 5 V TURN-OFF TIME vs. FORWARD CURRENT 3.0 VO = 5 V 2.5 Turn-on Time, ton (ms) Turn-off Time, ton (ms) 1.0 0.8 N.O. 0.6 2.0 N.C. 1.5 0.4 1.0 0.2 N.C. 0 0 5 10 15 20 25 30 0.5 N.O. 0 0 5 10 15 20 25 30 Forward Current, IF (mA) Forward Current, IF (mA) NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 3.0 NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 3.0 Normalized to 1.0 at TA = 25°C. IF = 10 mA VO = 5 V Normalized Turn-off Time, TOoff Normalized Turn-on Time, Ton 2.5 Normalized to 1.0 at TA = 25°C IF = 10 mA VO = 5 V 2.5 2.0 N.O. 2.0 N.C. 1.5 1.5 N.O. 1.0 1.0 N.C. 0.5 0.5 0.0 -25 0 25 50 75 100 0.0 -25 0 25 50 75 100 Ambient Temperature, TA (°C) Ambient Temperature, TA (°C) PS7142-1C, PS7142L-1C TYPICAL PERFORMANCE CURVES (TA = 25 °C) NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE ON-STATE RESISTANCE (N.O.) DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, IL = 10 mA Normalized On-State Resistance, RON ( Ω) 3.0 2.5 Normalized to 1.0 at TA = 25°C, IF = 10 mA, IL = 10 mA (N.O.) IF = 0 mA, IL = 10 mA (N.C.) 25 2.0 N.O. 1.5 N.C. Number (pcs) 20 15 1.0 10 0.5 5 0.0 -25 0 0 25 50 75 100 8 10 Ambient Temperature, TA (°C) On-State Resistance, RON (Ω) ON-STATE RESISTANCE (N.C.) DISTRIBUTION 30 30 TURN-ON TIME (N.O.) DISTRIBUTION n = 50 pcs, IF = 10 mA, VO = 5 V 25 n = 50 pcs, IF = 0 mA, IL = 10 mA 25 Number (pcs) Number (pcs) 20 20 15 15 10 10 5 5 0 6 8 0 0.3 0.4 On-State Resistance, RON (Ω) Turn-on Time, ton (ms) TURN-ON TIME (N.C.) DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, VO = 5 V TURN-OFF TIME (N.O.) DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, VO = 5 V 25 25 Number (pcs) 15 Number (pcs) 0.04 20 20 15 10 10 5 5 0 0.02 0 0.03 0.05 Turn-on Time, toff (ms) Turn-off Time, toff (ms) PS7142-1C, PS7142L-1C TYPICAL PERFORMANCE CURVES (TA = 25 °C) TURN-OFF TIME (N.C.) DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, VO = 5 V 25 Number (pcs) 20 15 10 5 0 0.6 0.8 Turn-off Time, toff (ms) OUTLINE DIMENSIONS (Units in mm) PS7142-1C (TOP VIEW) 9.25±0.5 8 7 6 5 PS7142L-1C (TOP VIEW) 9.25±0.5 8 7 6 5 1 2 3 4 1 2 3 6.5±0.5 4 3.5±0.3 7.62 6.5±0.5 0.10 0.9±0.25 9.60±0.4 +0.10 -0.05 4.15±0.3 3.5±0.3 1.34±0.1 2.54 3.3±0.3 1.34 ± 0.10 2.54 0.25 M 0.50 ± 0.10 0 to 15 ˚ 1. LED Anode 2. LED Cathode 3. LED Anode 4. LED Cathode 5. MOSFET (N.O.) 6. MOSFET (N.O.) 7. MOSFET (N.C.) 8. MOSFET (N.C.) 1. LED Anode 2. LED Cathode 3. LED Anode 4. LED Cathode 5. MOSFET (N.O.) 6. MOSFET (N.O.) 7. MOSFET (N.C.) 8. MOSFET (N.C.) PS7142-1C, PS7142L-1C TAPING SPECIFICATIONS (Units in mm) OUTLINE AND DIMENSIONS (TAPE) 2.0 ± 0.1 4.0 ± 0.1 1.55 ± 0.1 1.75 ± 0.1 4.3 ± 0.2 7.5 ± 0.1 16.0 ± 0.3 0.3 1.55 ± 0.1 10.4 ± 0.1 12.0 ± 0.1 TAPING DIRECTION PS7142L-1C-E3 PS7142L-1C-E4 OUTLINE AND DIMENSIONS (REEL) 1.5 2.0 ± 0.5 φ13.0 ± 0.5 φ80.0 ± 5.0 R1.0 φ21.0 ± 0.8 φ330 10.3 ± 0.1 16.4 -0.0 +2.0 Packing : 1000 pcs/reel PS7142-1C, PS7142L-1C RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature • Time of temperature higher than 210 °C • Number of reflows • Flux 235 °C or below (package surface temperature) 30 seconds or less Two Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (˚C) (heating) to 10 s 235 ˚C (peak temperature) 210 ˚C to 30 s 100 to 160 ˚C 60 to 120 s (preheating) Time (s) (2) Dip soldering • Temperature • Time • Number of times • Flux 260 °C or below (molten solder temperature) 10 seconds or less One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based cleaning solvent. EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM 07/27/2001 DATA SUBJECT TO CHANGE WITHOUT NOTICE