PS7206-1A-F4

Solid State Relay OCMOS FET PS7206-1A 4-PIN SOP, 0.6 Ω LOW ON-STATE RESISTANCE 600 mA CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET DESCRIPTION The PS7206-1A is a low on-state resistance solid state relay containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side. It is suitable for PLC, etc. because of its large continuous load current and low on-state resistance. FEATURES • Low on-state resistance (Ron = 0.6 Ω TYP.) • Large continuous load current (IL = 600 mA) • 1 channel type (1 a output) • Designed for AC/DC switching line changer • Small and thin package (4-pin SOP, Height = 2.1 mm) • High isolation voltage (BV = 1 500 Vr.m.s.) • Low offset voltage • Ordering number of taping product: PS7206-1A-E3, E4, F3, F4 APPLICATIONS • Measurement equipment • FA equipment Document No. PN10297EJ01V0DS (1st edition) (Previous No. P14496EJ5V0DS00) Date Published February 2003 CP(K) The mark shows major revised points. PS7206-1A PACKAGE DIMENSIONS in millimeters 4.0±0.5 TOP VIEW 4 3 1. LED Anode 2. LED Cathode 3. MOS FET 4. MOS FET 1 2 7.0±0.3 4.4 2.05+0.08 –0.05 0.15+0.10 –0.05 0.05+0.08 –0.05 2.54 0.40+0.10 –0.05 0.25 M 0.5±0.3 2 Data Sheet PN10297EJ01V0DS PS7206-1A ORDERING INFORMATION (Solder Contains Lead) Part Number PS7206-1A PS7206-1A-E3 PS7206-1A-E4 PS7206-1A-F3 PS7206-1A-F4 Embossed Tape 3 500 pcs/reel Package 4-pin SOP Packing Style Magazine case 100 pcs Embossed Tape 900 pcs/reel Application Part Number PS7206-1A *1 *1 For the application of the Safety Standard, following part number should be used. ORDERING INFORMATION (Pb-Free) Part Number PS7206-1A-A PS7206-1A-E3-A PS7206-1A-E4-A PS7206-1A-F3-A PS7206-1A-F4-A Embossed Tape 3 500 pcs/reel Package 4-pin SOP Packing Style Magazine case 100 pcs Embossed Tape 900 pcs/reel Application Part Number PS7206-1A *1 *1 For the application of the Safety Standard, following part number should be used. ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherw ise specified) Parameter Diode Forward Current (DC) Reverse Voltage Power Dissipation Peak Forward Current MOS FET Break Down Voltage Continuous Load Current Pulse Load Current *2 *1 Symbol IF VR PD IFP VL IL ILP Ratings 50 5.0 50 1 60 600 1.2 Unit mA V mW A V mA A (AC/DC Connection) Power Dissipation Isolation Voltage *3 PD BV PT TA Tstg 300 1 500 350 −40 to +85 −40 to +100 mW Vr.m.s. mW °C °C Total Power Dissipation Operating Ambient Temperature Storage Temperature *1 PW = 100 µs, Duty Cycle = 1 % *2 PW = 100 ms, 1 shot *3 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output Data Sheet PN10297EJ01V0DS 3 PS7206-1A RECOMMENDED OPERATING CONDITIONS (TA = 25 °C) Parameter LED Operating Current LED Off Voltage Symbol IF VF MIN. 2 0 TYP. 10 MAX. 20 0.5 Unit mA V ELECTRICAL CHARACTERISTICS (TA = 25 °C) Parameter Diode Forward Voltage Reverse Current MOS FET Off-state Leakage Current Output Capacitance Coupled LED On-state Current On-state Resistance Turn-on Time Turn-off Time Cout IFon Ron ton toff VD = 0 V, f = 1 MHz IL = 600 mA IF = 10 mA, IL = 600 mA, t ≤ 10 ms IF = 10 mA, VO = 5 V, RL = 500 Ω, PW ≥ 10 ms 0.6 0.4 0.08 70 2.0 0.8 2.0 0.5 pF mA Ω ms Symbol VF IR ILoff IF = 10 mA VR = 5 V V D = 60 V Conditions MIN. TYP. 1.2 MAX. 1.4 5.0 1.0 Unit V µA µA Isolation Resistance Isolation Capacitance RI-O CI-O VI-O = 1.0 kVDC V = 0 V, f = 1 MHz 10 9 Ω 0.5 pF *1 Test Circuit for Switching Time IF Pulse Input VL Input 50 % 0 VO = 5 V Input monitor VO monitor Output 90 % Rin RL ton toff 10 % 4 Data Sheet PN10297EJ01V0DS PS7206-1A TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherw ise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 100 Maximum Forward Current IF (mA) Maximum Load Current IL (mA) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 900 80 600 60 40 300 20 0 –25 0 25 50 75 85 100 0 –25 0 25 50 75 85 100 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE 1.8 Output Capacitance Cout (pF) OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 200 f = 1 MHz Forward Voltage VF (V) 1.6 1.4 IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 150 100 1.2 1.0 50 0.8 –25 0 25 50 75 100 0 20 40 60 80 100 120 Ambient Temperature TA (˚C) Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. AMBIENT TEMPERATURE 10 Off-state Leakage Current ILoff (A) –6 LOAD CURRENT vs. LOAD VOLTAGE 900 IF = 10 mA, IL = 600 mA Load Current IL (mA) VD = 60 V 10–7 10–8 600 300 10–9 –10 –0.8 –0.4 0 0.4 –300 –600 –900 0.8 10 10–11 0 20 40 60 80 Ambient Temperature TA (˚C) Load Voltage VL (V) Data Sheet PN10297EJ01V0DS 5 PS7206-1A NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE 3.0 Normalized On-state Resistance Ron ON-STATE RESISTANCE DISTRIBUTION 30 2.5 2.0 1.5 1.0 0.5 0.0 –25 Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, IL = 600 mA Number (pcs) 25 20 15 10 5 0 n = 50 pcs, IF = 10 mA, IL = 600 mA t 10 ms 0 25 50 75 100 0.4 0.6 0.8 Ambient Temperature TA (˚C) On-state Resistance Ron (Ω) TURN-ON TIME vs. FORWARD CURRENT 3.0 2.5 Turn-on Time ton (ms) TURN-OFF TIME vs. FORWARD CURRENT 0.30 VO = 5 V, RL = 500 Ω VO = 5 V, RL = 500 Ω Turn-off Time toff (ms) 0.25 0.20 0.15 0.10 0.05 2.0 1.5 1.0 0.5 0 5 10 15 20 25 30 0 5 10 15 20 25 30 Forward Current IF (mA) Forward Current IF (mA) TURN-ON TIME DISTRIBUTION 30 25 Number (pcs) TURN-OFF TIME DISTRIBUTION 30 25 Number (pcs) n = 50 pcs, IF = 10 mA, VO = 5 V, RL = 500 Ω n = 50 pcs, IF = 10 mA, VO = 5 V, RL = 500 Ω 20 15 10 5 0 20 15 10 5 0 0.4 0.6 0.08 0.12 Turn-on Time ton (ms) Turn-off Time toff (ms) 6 Data Sheet PN10297EJ01V0DS PS7206-1A NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 3.0 NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 3.0 Normalized Turn-on Time ton Normalized Turn-off Time toff 2.5 2.0 1.5 1.0 0.5 0.0 –25 Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V RL = 500 Ω 2.5 2.0 1.5 1.0 0.5 0.0 –25 Normalized to 1.0 at TA = 25 ˚C, IF = 10 mA, VO = 5 V, RL = 500 Ω 0 25 50 75 100 0 25 50 75 100 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) Remark The graphs indicate nominal characteristics. Data Sheet PN10297EJ01V0DS 7 PS7206-1A TAPING SPECIFICATIONS (in millimeters) Outline and Dimensions (Tape) 2.0±0.05 4.0±0.1 1.75±0.1 1.5+0.1 –0 2.9 MAX. 5.5±0.05 12.0±0.2 1.55±0.1 8.0±0.1 7.4±0.1 4.6±0.1 2.4±0.1 0.3 Tape Direction PS7206-1A-E3 PS7206-1A-E4 Outline and Dimensions (Reel) 2.0±0.5 2.0±0.5 φ13.0±0.2 φ 180+0 –1.5 φ 21.0±0.8 R 1.0 φ 60 +1 –0 13.5±1.0 17.5±1.0 Packing: 900 pcs/reel 11.9 to 15.4 Outer edge of flange 8 Data Sheet PN10297EJ01V0DS PS7206-1A Outline and Dimensions (Tape) 2.0±0.05 4.0±0.1 1.75±0.1 1.5+0.1 –0 2.9 MAX. 5.5±0.05 12.0±0.2 1.55±0.1 8.0±0.1 7.4±0.1 4.6±0.1 2.4±0.1 0.3 Tape Direction PS7206-1A-F3 PS7206-1A-F4 Outline and Dimensions (Reel) 2.0±0.5 φ 330±2.0 2.0±0.5 φ13.0±0.2 φ 100±1.0 R 1.0 φ 21.0±0.8 φ 13.0±0.2 13.5±1.0 17.5±1.0 Packing: 3 500 pcs/reel 11.9 to 15.4 Outer edge of flange Data Sheet PN10297EJ01V0DS 9 PS7206-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature • Time of peak reflow temperature • Time of temperature higher than 220°C • Time to preheat temperature from 120 to 180°C • Number of reflows • Flux 260°C or below (package surface temperature) 10 seconds or less 60 seconds or less 120±30 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (˚C) (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature • Time • Preheating conditions • Number of times • Flux 260°C or below (molten solder temperature) 10 seconds or less 120°C or below (package surface temperature) One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 10 Data Sheet PN10297EJ01V0DS 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.