PS9614L-E3-A

NEC's HIGH NOISE REDUCTION PS9614 HIGH SPEED DIGITAL OUTPUT TYPE PS9614L 8 PIN DIP OPTOCOUPLER FEATURES DESCRIPTION • HIGH COMMON MODE TRANSIENT IMMUNITY: CMR, CML: ± 20 kV/µs TYP NEC's PS9614 and PS9614L are optically coupled isolators containing a GaAIAs LED on the light emitting diode (input) side and a photodiode and a signal procesing circuit on the detector (output) side on one chip. The PS9614 is in a plastic DIP (Dual In-line Package) and the PS9614L is a lead-bending type (Gull-wing) for surface mount. • HIGH SPEED RESPONSE: 10 Mbps • HIGH ISOLATION VOLTAGE: BV: 3750 Vr.m.s. MIN • OPEN COLLECTOR OUTPUT TYPE • TAPE AND REEL AVAILABLE: PS9614L-E3, E4: 1000 Pcs/Reel APPLICATIONS • MEASUREMENT EQUIPMENT • PDP • FACTORY AUTOMATION NETWORK ELECTRICAL CHARACTERISTICS (TA = -40~+85°C unless otherwise specified) PART NUMBER Coupled Detector Diode SYMBOLS PS9614, PS9614L PARAMETERS VF Forward Voltage, IF = 10 mA, TA = 25°C V µA UNITS MIN TYP 1.4 1.65 1.9 MAX IR Reverse Current, VR = 5 V, TA = 25°C Ct Terminal Capacitance, V = 0V, f = 1 MHz, TA = 25°C pF 30 10 IOH High Level Output Current, VCC = VO = 5.5 V, VF = 0.8 V µA 0.03 250 VOL Low Level Output Voltage, VCC = 5.5 V, IF = 5 mA, IO = 13 mA V 0.2 0.6 ICCH High Level Supply Current, VCC = 5.5 V, IF = 0 mA mA 2.6 8 ICCL Low Level Supply Current, VCC = 5.5 V, IF = 10 mA mA 7 11 2.3 5 IFHL Threshold Input Current, VCC = 5 V, VO = 0, 0.8 V, RL = 350 Ω % RI-O Isolation Resistance,Vin-out = 1k VDC, RH = 40 to 60%, TA = 25°C Ω CI-O Isolation Capacitance, V = 0, f = 1 MHz, TA = 25°C pF 0.9 tPHL Propagation Delay Time, High → Low1,VCC = 5 V, RL = 350 Ω, IF = 7.5 mA TA = 25°C ns 61 75 100 tPLH Propagation Delay Time, Low → High1, VCC = 5 V, RL = 350 Ω, IF = 7.5 mA TA = 25°C ns 51 75 100 tr Rise Time, VCC = 5 V, RL = 350 Ω, IF = 7.5 mA ns 20 tf 1011 Fall Time, VCC = 5 V, RL = 350 Ω, IF = 7.5 mA ns 8 PWD Pulse Width Distortion, VCC = 5 V, RL = 350 Ω, IF = 7.5 mA ns 10 tPSK Propagation Skew, VCC = 5 V, RL = 350 Ω, IF = 7.5 mA ns CMH Common Mode Transient Immunity at High Level Output2 VCC = 5 V, VCM = 1 kV, TA = 25°C, IF = 0 mA, VO (MIN) = 2 V, RL = 350 Ω kV/µs 10 20 CML Common Mode Transient Immunity at Low Level Output2 VCC = 5 V, VCM = 1 kV, TA = 25°C, IF = 0 mA, VO (MIN) = 0.8 V, RL = 350 Ω kV/µs 10 20 50 60 Please see notes on the next page. California Eastern Laboratories PS9614, PS9614L ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS Diode IF VR Detector VCC VO IO PC BV TA TSTG PARAMETERS UNITS RATINGS mA V 30 3 V V mA mW Vr.m.s. °C °C 7 7 25 40 3750 -40 to +85 -55 to +125 RECOMMENDED OPERATING CONDITIONS SYMBOLS Forward Current Reverse Voltage Supply Voltage Output Voltage Output Current Power Dissipation Isolation Voltage2 Operating Ambient Temp. Storage Temperature Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output. PARAMETERS UNITS MIN TYP MAX VFL Low Level Input Voltage V 0 IFH High Level Input Current mA 6.3 10 12.5 VCC Supply Voltage V 4.5 5 5.5 330 N TTL (loads) (RL = 1kΩ) RL Pull-up Resistance Ω TA Operating Ambient Temperature -40 0.8 5 4k +85 FUNCTIONAL DIAGRAM 8 2 MARKING 6 Country Assembled No. 1 pin Mark Type Number PS9614 M003 3 Assembly Lot 5 Shield LED M 0 03 Week Assembled Year Assembled (Last 1 Digit) Rank Code Output ON L OFF H (Continued from previous page.) Note: 1. Test Circuit for Propagation Delay Time: VCC = 5 V Pulse input (IF) (PW = 1 µ s, Duty cycle = 1/10) Input (monitor) 47 Ω 1 5 2 6 3 7 4 8 (IF = 7.5 mA) Input 50% 0.1 µ F RL = 350 Ω 0V 5V VO (monitor) CL = 15 pF VOH Output tPHL 1.5 V VOL tPLH *CL is approximately 15 pF which includes probe and stray wiring capacitance. CL includes probe and stray wiring capacitance. 2. Test Circuit for Common Mode Transient Immunity: VCC = 5 V SW IF 1 5 2 6 0.1 µ F 1 kV VCM 90% 10% RL = 350 Ω 0V tr 3 VO (monitor) 7 CL = 15 pF 4 tf 8 VCM VO (IF = 0 mA) VO (IF = 7.5 mA) CL includes probe and stray wiring capacitance. USAGE CAUTIONS 1. Protect against static electricity when handling this product. 2. Bypass capacitor greater than 0.1 µF is used between VCC and GND near device (lead distance: 10 mm MIN). VOH 2V 0.8 V VOL PS9614, PS9614L TYPICAL PERFORMANCE CURVES (TA = 25°C) DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 50 Detector Power Dissipation, PC (mW) Maximum Forward Current, IF (mA) 40 30 20 10 0 20 40 8085 60 100 20 10 FORWARD CURRENT vs. FORWARD VOLTAGE SUPPLY CURRENT vs. AMBIENT TEMPERATURE 10 TA = +85˚C +50˚C +25˚C 0˚C –25˚C 0.1 1.2 1.4 1.6 1.8 2.0 2.2 10 8 4 ICCH (IF = 0 mA) 2 –25 0 25 50 75 100 Ambient Temperature, TA (°C) OUTPUT VOLTAGE vs. FORWARD CURRENT LOW LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE 6 0.6 4 Low Level Output Voltage, VOL (V) VCC = 5.0 V, TA = 25˚C 5 Output Voltage, VO (V) ICCL (IF = 10 mA) 6 0 –50 2.4 100 12 Forward Voltage, VF (V) RL = 350 Ω 1.0 kΩ 4.0 kΩ 3 2 1 0 85 Ambient Temperature, TA (°C) 1 0 High Level Supply Current, ICCH (mA) Low Level Supply Current, ICCL (mA) Forward Current, IF (mA) 30 20 40 60 80 Ambient Temperature, TA (°C) 100 0.01 1.0 40 1 2 3 4 Forward Current, IF (mA) 5 6 IF = 5.0 mA, VCC = 5.5 V 0.5 0.4 IOL = 16.0 mA 13.0 mA 10.0 mA 6.0 mA 0.3 0.2 0.1 0 –50 –25 0 25 50 75 Ambient Temperature, TA (°C) 100 PS9614, PS9614L TYPICAL PERFORMANCE CURVES (TA = 25°C) PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURE THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE RL = 350 Ω 4 1.0 kΩ 4.0 kΩ 3 2 1 0 –50 Propagation Delay Time, tPHL, tPLH (ns) Propagation Delay Time, tPHL, tPLH (ns) VCC = 5.0 V, VO = 0.8 V 120 100 –25 0 25 50 75 100 IF = 7.5 mA, VCC = 5.0 V 80 tPLH: RL = 1.0 kΩ tPLH: RL = 350 Ω 60 40 tPHL: RL = 350 Ω tPHL: RL = 1.0 kΩ 20 0 –50 25 50 75 PULSE WIDTH DISTORTION vs. AMBIENT TEMPERATURE tPLH: RL = 4.0 kΩ 60 tPHL: RL = 4.0 kΩ 40 20 –25 0 25 50 75 IF = 7.5 mA, VCC = 5.0 V 50 40 RL = 4.0 kΩ 30 RL = 350 Ω 20 RL = 1.0 kΩ 10 0 –50 100 Propagation Delay Time, tPHL, tPLH (ns) tr: RL = 4.0 kΩ 300 250 tr: RL = 1.0 kΩ 150 tr: RL = 350 Ω 100 tf: RL = 350 Ω, 1.0 kΩ, 4.0 kΩ 50 –25 0 25 50 75 Ambient Temperature, TA (°C) 0 25 50 75 100 PROPAGATION DELAY TIME vs. FORWARD CURRENT 400 200 –25 Ambient Temperature, TA (°C) SWITCHING TIME vs. AMBIENT TEMPERATURE IF = 7.5 mA, 350 VCC = 5.0 V 100 60 Ambient Temperature, TA (°C) Switching Time, tr, tf (ns) 0 PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURE 80 0 –50 –25 Ambient Temperature, TA (°C) IF = 7.5 mA, VCC = 5.0 V 0 –50 100 Ambient Temperature, TA (°C) Pulse Width Distortion, |tPHL—tPLH| (ns) Threshold Input Current, IFHL (mA) 5 100 90 80 tPLH: RL = 4.0 kΩ tPHL: RL = 350 Ω tPHL: RL = 4.0 kΩ 1.0 kΩ 70 60 50 tPLH: RL = 1.0 kΩ tPLH: RL = 350 Ω VCC = 5.0 V, TA = 25˚C 40 30 5 7 9 11 13 Forward Current, IF (mA) 15 PS9614, PS9614L TYPICAL PERFORMANCE CURVES (TA = 25°C) SWITCHING TIME vs. FORWARD CURRENT 350 50 VCC = 5.0 V RL = 4.0 kΩ 40 30 20 RL = 350 Ω RL = 1.0 kΩ 10 IF = 7.5 mA VCC = 5.0 V 300 Switching Time, tr, tf (ns) Pulse Width Distortion, |tPHL—tPLH| (ns) PULSE WITH DISTORTION vs. FORWARD CURRENT tr: RL = 4.0 kΩ 250 200 150 tr: RL = 1.0 kΩ 100 tr: RL = 350 Ω 50 0 –50 –25 0 25 50 75 0 100 tr: RL = 350 Ω, 1.0 kΩ, 4.0 kΩ 5 Forward Current, IF (mA) 7 9 11 13 Forward Current, IF (mA) Note: Graphs indicate nominal characteristics. TAPING SPECIFICATIONS (Units in mm) Tape Direction 1.75 ± 0.1 Tape Outline and Dimensions 2.0 ± 0.1 1.55 ± 0.1 4.0 ± 0.1 PS9614L-E3 10.3 ± 0.1 16.0 ± 0.3 7.5 ± 0.1 4.5 MAX 0.3 1.55 ± 0.1 7.6 ± 0.1 12.0 ± 0.1 Reel Outline and Dimensions 2.0±0.5 2.0 ± 0.5 R1.0 φ100 ± 1.0 φ330 φ13.0 ± 0.5 φ21.0 ± 0.8 Packing: 1000 pcs/reel 15.9 to 19.4 outer edge of flange PS9614L-E4 15 PS9614, PS9614L PACKAGE OUTLINE (Units in mm) PS9614 PIN CONNECTION (Top View) 8 5 10.16 MAX 6.5 1 4 1. 2. 3. 4. 5. 6. 7. 8. NC Anode Cathode NC GND VO NC VCC 1. 2. 3. 4. 5. 6. 7. 8. NC Anode Cathode NC GND VO NC VCC 2.54 3.8 MAX 4.55 MAX 7.62 2.8 MAX 0.65 1.25 ± 0.10 0 to 15˚ 0.50 ± 0.10 0.25 M PS9614L PIN CONNECTION (Top View) 10.16 MAX 5 6.5 8 1 4 2.54 0.05~0.2 3.8 MAX 1.25±0.10 0.25 M 0.9±0.25 9.60±0.4 PS9614, PS9614L RECOMMENDED SOLDERING CONDITIONS Package Surface Temperature T (˚C) (1) Infrared reflow soldering • Peak reflow temperature • Time of peak reflow temperature • Time of temperature higher than 220 ºC • Time to preheat temperature from 120 to 180°C • Number of reflows • Flux 260 ˚C or below (package surface temperature) 10 seconds or less 60 seconds or less 120±30 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (heating) to 10 s 260˚C (peak temperature) 220˚C to 60 s 120 ˚C 120–30 s (preheating) Time (s) (2) Wave Soldering • Temperature • Time • Preheating conditions • Number of times • Flux 260°C or below 10 seconds or less 120°C or below (package surface temperature One (allowed to be dipped in solder including plastic mold portion) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended. (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 10/14/2003 A Business Partner of NEC Compound Semiconductor Devices, Ltd.