THEVA1027

THine Electronics, Inc. THEVA1027 Mode Setting & LVDS-Cable Description 2011/04/14 LVDS-Cable Type. t=1.6mm 80mm GND JAE ↓ +3.3V JAE ↓ 80mm FI-X X30HL ･ ･ ･ ･ ･ ←High ←Low FI-X30SSL-HF FI-X X30HL FI-X30SSL-HF 200mm DIP-SW Setting SW Pin# * NodeName Def. IC Pin# Description Mode selection 1 2 L L MODE1 MODE0 MODE1 MODE0 L L RCLK2+/- Description clkin Dual-in / Dual-out mode Hi-Z Distribution mode 34 H L Hi-Z g / Dual-out mode Single-in L H clkin Dual-in / Single-out mode H H - Reserved 33 In Distribution and Single-in/Dual-out mode, RCLK2+/- must be Hi-Z. 3 H RS 1 LVDS output swing level selection H: Normal swing L: Reduced swing 4 H PD 32 Power Down P D H: Normal operation L: Power down state, all LVDS output signals turn to Hi-Z * Def. : Default Setting Copyright© 2011 THine Electronics, Inc. 1/2 THEVA1027_manual_Rev.1.00_E THine Electronics, Inc. THEVA1027 Mode Setting & LVDS-Cable 2011/04/14 Notices and Requests 1． The product specifications described in this material are subject to change without prior notice. 2． The h circuit i i diagrams di described d ib d in i this hi material i l are examples l of the h application li i which hi h may not always l apply to the customer’s design. We are not responsible for possible errors and omissions in this material. Please note if errors or omissions should be found in this material, we may not be able to correct them i di l 3． This material contains our copy right, know-how or other proprietary. Copying or disclosing to third parties the contents of this material without our prior permission is prohibited. 4 Note that if infringement of any third party's industrial ownership should occur by using this product, 4． product we will be exempted from the responsibility unless it directly relates to the production process or functions of the product. 5. This product is presumed to be used for general electric equipment, not for the applications which require very hi reliability (including medical equipment directly concerning people's life, aerospace equipment, or nuclear contro equipment). Also, when using this product for the equipment concerned with the control and safety of the transportation means, the traffic signal equipment, or various Types of safety equipment, please do it after applyin appropriate measures to the product. 6． Despite our utmost efforts to improve the quality and reliability of the product, faults will occur with a certain small probability, which is inevitable to a semi-conductor product. Therefore, you are encouraged to have suffici redundant or error preventive design applied to the use of the product so as not to have our product cause any soc or public damage. 7 Please note that this product is not designed to be radiation-proof. 7． radiation proof 8． Customers are asked, if required, to judge by themselves if this product falls under the category of strategic good under the Foreign Exchange and Foreign Trade Control Law. THine Electronics, Inc. sales@thine.co.jp Copyright© 2011 THine Electronics, Inc. 2/2 THEVA1027_manual_Rev.1.00_E