UPA806T-T1-A

NPN SILICON HIGH FREQUENCY TRANSISTOR FEATURES • • • • • SMALL PACKAGE STYLE: 2 NE685 Die in a 2 mm x 1.25 mm package LOW NOISE FIGURE: NF = 1.5 dB TYP at 2 GHz HIGH GAIN: |S21E|2 = 8.5 dB TYP at 2 GHz HIGH GAIN BANDWIDTH: fT = 12 GHz EXCELLENT LOW VOLTAGE, LOW CURRENT PERFORMANCE 0.65 2.0 ± 0.2 1.3 2 1 UPA806T OUTLINE DIMENSIONS (Units in mm) PACKAGE OUTLINE S06 (Top View) 2.1 ± 0.1 1.25 ± 0.1 6 0.2 (All Leads) 5 3 4 DESCRIPTION NEC's UPA806T is two NPN high frequency silicon epitaxial transistors encapsulated in an ultra small 6 pin SMT package. Each transistor is independently mounted and easily configured for either dual transistor or cascode operation. The high fT, low voltage bias and small size make this device suited for various hand-held wireless applications. 0.9 ± 0.1 0.7 0.15 - 0.05 0 ~ 0.1 PIN OUT 1. Collector Transistor 1 2. Emitter Transistor 1 3. Collector Transistor 2 4. Emitter Transistor 2 5. Base Transistor 2 6. Base Transistor 1 Note: Pin 3 is identified with a circle on the bottom of the package. +0.10 ELECTRICAL CHARACTERISTICS (TA = 25°C) PART NUMBER PACKAGE OUTLINE SYMBOLS ICBO IEBO hFE1 fT Cre2 |S21E|2 NF hFE1/hFE2 PARAMETERS AND CONDITIONS Collector Cutoff Current at VCB = 5 V, IE = 0 Emitter Cutoff Current at VEB = 1 V, IC = 0 Forward Current Gain at VCE = 3 V, IC = 10 mA Gain Bandwidth at VCE = 3 V, IC = 10 mA, f = 2 GHz Feedback Capacitance at VCB = 3 V, IE = 0, f = 1 MHz Insertion Power Gain at VCE = 3 V, IC = 10 mA, f = 2 GHz Noise Figure at VCE = 3 V, IC = 3 mA, f = 2 GHz hFE Ratio: hFE1 = Smaller Value of Q1, or Q2 hFE2 = Larger Value of Q1 or Q2 GHz pF dB dB 0.85 7 UNITS µA µA 75 100 12 0.4 8.5 1.5 2.5 0.7 MIN UPA806T S06 TYP MAX 0.1 0.1 150 Notes: 1. Pulsed measurement, pulse width ≤ 350 µs, duty cycle ≤ 2 %. 2. The emitter terminal should be connected to the ground terminal of the 3 terminal capacitance bridge. For Tape and Reel version use part number UPA806T-T1, 3K per reel. California Eastern Laboratories UPA806T ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS VCBO VCEO VEBO IC PT PARAMETERS Collector to Base Voltage Collector to Emitter Voltage Emitter to Base Voltage Collector Current Total Power Dissipation 1 Die 2 Die Junction Temperature Storage Temperature UNITS V V V mA mW mW °C °C RATINGS 9 6 2 30 110 200 150 -65 to +150 ORDERING INFORMATION PART NUMBER UPA806T-T1-A QUANTITY 3000 PACKAGING Tape & Reel TJ TSTG Note: 1. Operation in excess of any one of these parameters may result in permanent damage. TYPICAL PERFORMANCE CURVES INSERTION POWER GAIN vs. COLLECTOR CURRENT 10 60 COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 500 µA Insertion Power Gain, |S21E|2 (dB) f = 2 GHz Collector Current, lc (mA) 5V 8 3V 50 400 µA 40 300 µA 30 200 µA 20 lB=100 µA 10 6 VCE = 1 V 4 2 0.5 2 5 10 20 50 0 1 2 3 4 5 6 Collector Current, lc (mA) Collector to Emitter Voltage, VCE (V) Q1 NOISE FIGURE vs. COLLECTOR CURRENT 4 VCE = 3 V f = 2 GHz 200 DC CURRENT GAIN vs. COLLECTOR CURRENT Noise Figure, NF (dB) 3 DC Current Gain, hFE 5V VCE = 3 V 100 2 1 0 0.5 1 2 5 10 20 50 0 0.1 0.2 0.5 1 2 5 10 20 50 100 Collector Current, lc (mA) Collector Current, lc (mA) UPA806T TYPICAL PERFORMANCE CURVES GAIN BANDWIDTH PRODUCT vs. COLLECTOR CURRENT 14 FEEDBACK CAPACITANCE vs. COLLECTOR TO BASE VOLTAGE 0.6 f = 1 MHz f = 2 GHz 5V Gain Bandwidth Product, fT (GHz) 12 Feedback Capacitance, Cre (pF) 50 0.5 10 3V 8 VCE = 1 V 0.4 6 0.3 4 2 0.5 1 2 5 10 20 0.2 0.5 1 2 5 10 20 Collector Current, lc (mA) Collector to Base Voltage, VCB (V) TOTAL POWER DISSIPATION vs. AMBIENT TEMPERATURE 50 COLLECTOR CURRENT vs. BASE TO EMITTER VOLTAGE VCE = 3 V Total Power Dissipation, PT (mW) 2 elements in total 200 Free Air Q1 when using 1 element Collector Current, lc (mA) 150 40 30 Q1 when using 2 elements 100 20 10 0 50 100 0 0.5 1.0 Ambient Temperature, TA (°C) Base to Emitter Voltage, VBE (V) UPA806T TYPICAL SCATTERING PARAMETERS (TA = 25°C) UPA806T(Q1) VCE = 1 V, IC = 1 mA FREQUENCY (GHz) 0.50 0.60 0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80 3.00 MAG 0.893 0.846 0.766 0.693 0.624 0.558 0.498 0.445 0.400 0.362 0.329 0.301 0.279 0.268 S11 ANG -33.80 -40.80 -53.80 -65.70 -76.80 -87.70 -98.60 -109.60 -120.50 -131.30 -142.00 -152.90 -165.00 -179.10 MAG 2.828 2.750 2.615 2.486 2.354 2.221 2.093 1.973 1.865 1.766 1.677 1.593 1.515 1.445 S21 ANG 145.80 139.10 127.20 116.60 106.90 97.90 89.40 81.30 73.90 67.00 60.90 55.30 50.10 44.80 MAG 0.098 0.116 0.145 0.169 0.187 0.201 0.212 0.220 0.226 0.229 0.232 0.233 0.234 0.235 S12 ANG 67.30 62.10 54.30 47.80 42.10 37.10 32.70 28.90 25.70 23.20 21.30 20.00 18.90 18.10 MAG 0.933 0.911 0.867 0.823 0.778 0.735 0.694 0.656 0.621 0.591 0.565 0.542 0.523 0.506 S22 ANG -20.90 -24.50 -31.20 -37.40 -43.20 -48.70 -53.90 -58.90 -63.60 -68.00 -72.00 -75.80 -79.30 -82.70 0.218 0.282 0.365 0.435 0.502 0.568 0.633 0.699 0.764 0.830 0.893 0.960 1.022 1.076 K Gmag (dB) 14.603 13.749 12.561 11.676 11.000 10.434 9.944 9.527 9.166 8.872 8.590 8.349 7.202 6.207 UPA806T(Q2) VCE = 1 V, IC = 1 mA FREQUENCY (GHz) 0.50 0.60 0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80 3.00 MAG 0.899 0.856 0.783 0.717 0.655 0.595 0.540 0.490 0.447 0.408 0.372 0.339 0.311 0.290 S11 ANG -34.10 -41.10 -54.00 -65.70 -76.60 -87.00 -97.20 -107.20 -116.90 -126.30 -135.40 -144.60 -154.90 -167.50 MAG 2.832 2.755 2.622 2.495 2.367 2.239 2.116 2.001 1.898 1.804 1.719 1.640 1.565 1.497 S21 ANG 145.80 139.20 127.40 116.80 107.10 98.00 89.50 81.40 73.80 66.80 60.40 54.50 48.90 43.20 MAG 0.090 0.106 0.134 0.155 0.172 0.185 0.196 0.204 0.210 0.215 0.218 0.220 0.221 0.223 S12 ANG 66.90 61.70 53.60 47.10 41.30 36.10 31.60 27.60 24.20 21.50 19.20 17.50 16.00 14.60 MAG 0.937 0.916 0.873 0.831 0.789 0.747 0.707 0.670 0.635 0.604 0.577 0.552 0.531 0.511 S22 ANG -20.70 -24.20 -30.80 -36.90 -42.60 -48.00 -53.10 -58.10 -62.80 -67.40 -71.70 -75.90 -80.00 -84.00 0.210 0.272 0.357 0.424 0.490 0.559 0.625 0.692 0.760 0.825 0.893 0.962 1.028 1.087 K Gmag (dB) 14.979 14.148 12.915 12.067 11.387 10.829 10.333 9.916 9.561 9.238 8.968 8.724 7.467 6.474 Note: 1. Gain Calculation: MAG = |S21| |S12| (K ± K 2- 1 ). When K ≤ 1, MAG is undefined and MSG values are used. MSG = 2 2 2 |S21| , K = 1 + | ∆ | - |S11| - |S22| , ∆ = S11 S22 - S21 S12 |S12| 2 |S12 S21| MAG = Maximum Available Gain MSG = Maximum Stable Gain UPA806T TYPICAL SCATTERING PARAMETERS (TA = 25°C) UPA806T(Q1) VCE = 2 V, IC = 5 mA FREQUENCY (GHz) 0.50 0.60 0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80 3.00 MAG 0.537 0.464 0.351 0.272 0.216 0.176 0.146 0.124 0.112 0.109 0.113 0.124 0.140 0.162 S11 ANG -62.90 -68.80 -81.80 -95.90 -110.40 -125.30 -140.60 -156.90 -174.00 169.30 154.50 142.00 131.40 121.50 MAG 8.804 7.894 6.511 5.539 4.820 4.250 3.778 3.381 3.055 2.800 2.612 2.477 2.371 2.249 S21 ANG 121.00 115.70 105.20 95.50 87.10 80.20 74.60 69.80 65.40 61.00 56.40 51.70 47.00 42.80 MAG 0.064 0.071 0.085 0.097 0.110 0.123 0.135 0.148 0.161 0.174 0.187 0.201 0.214 0.226 S12 ANG 60.90 59.00 56.60 55.20 54.10 53.20 52.40 51.40 50.40 49.20 47.90 46.50 44.90 43.20 MAG 0.710 0.664 0.587 0.529 0.485 0.451 0.425 0.404 0.387 0.372 0.360 0.349 0.339 0.329 S22 ANG -34.60 -36.80 -40.90 -44.70 -48.20 -51.40 -54.30 -57.20 -60.00 -63.00 -66.20 -69.70 -73.40 -77.10 0.533 0.617 0.744 0.837 0.901 0.949 0.992 1.028 1.057 1.077 1.085 1.078 1.069 1.069 K Gmag (dB) 21.385 20.460 18.842 17.567 16.417 15.385 14.469 12.563 11.326 10.374 9.676 9.199 8.836 8.380 UPA806T(Q2) VCE = 2 V, IC = 5 mA FREQUENCY (GHz) 0.50 0.60 0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80 3.00 Note: 1. Gain Calculation: MAG = |S21| |S12| S11 MAG 0.562 0.491 0.383 0.307 0.253 0.212 0.179 0.153 0.132 0.118 0.111 0.110 0.115 0.127 ANG -61.50 -67.40 -80.00 -92.90 -105.30 -117.00 -128.10 -139.00 -150.50 -162.90 -176.20 169.90 155.50 140.60 MAG 8.997 8.086 6.704 5.732 5.008 4.429 3.945 3.536 3.200 2.937 2.744 2.608 2.501 2.376 S21 ANG 121.90 116.40 105.60 95.60 87.10 79.90 74.00 68.90 64.20 59.50 54.60 49.60 44.80 40.20 MAG 0.059 0.066 0.078 0.089 0.101 0.112 0.124 0.136 0.148 0.160 0.173 0.185 0.198 0.210 S12 ANG 60.70 58.50 55.70 54.00 52.70 51.70 50.70 49.60 48.40 47.10 45.70 44.00 42.30 40.30 MAG 0.729 0.683 0.608 0.550 0.506 0.472 0.445 0.423 0.404 0.388 0.374 0.361 0.348 0.336 S22 ANG -33.10 -35.20 -39.20 -42.80 -46.00 -48.90 -51.40 -53.90 -56.50 -59.30 -62.40 -65.80 -69.50 -73.40 K Gmag (dB) 0.516 0.602 0.733 0.830 0.895 0.950 0.993 1.031 1.064 1.087 1.093 1.093 1.083 1.083 21.832 20.882 19.342 18.089 16.953 15.971 15.026 13.065 11.801 10.839 10.141 9.637 9.254 8.783 (K ± K 2- 1 ). When K ≤ 1, MAG is undefined and MSG values are used. MSG = 2 2 2 |S21| , K = 1 + | ∆ | - |S11| - |S22| , ∆ = S11 S22 - S21 S12 |S12| 2 |S12 S21| MAG = Maximum Available Gain MSG = Maximum Stable Gain UPA806T TYPICAL SCATTERING PARAMETERS (TA = 25°C) UPA806T(Q1) VCE = 2 V, IC = 10 mA FREQUENCY (GHz) 0.50 0.60 0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80 3.00 MAG 0.323 0.270 0.190 0.137 0.107 0.095 0.093 0.096 0.103 0.113 0.125 0.141 0.159 0.181 S11 ANG -79.50 -85.10 -99.30 -118.00 -140.80 -164.50 174.40 157.30 143.70 132.80 124.10 116.90 110.80 105.10 MAG 10.650 9.383 7.445 6.111 5.181 4.507 3.991 3.581 3.247 2.977 2.763 2.597 2.465 2.330 S21 ANG 109.10 105.00 96.40 88.00 80.50 74.50 69.90 66.10 62.70 58.90 54.50 49.50 44.30 40.10 MAG 0.054 0.061 0.074 0.089 0.103 0.118 0.133 0.148 0.162 0.177 0.192 0.206 0.221 0.234 S12 ANG 63.40 63.30 62.90 62.30 61.40 60.30 59.00 57.50 55.90 54.20 52.30 50.40 48.40 46.40 MAG 0.567 0.532 0.473 0.430 0.398 0.374 0.357 0.343 0.332 0.322 0.312 0.302 0.293 0.284 S22 ANG -37.90 -38.90 -41.00 -43.40 -46.10 -48.90 -51.80 -54.80 -57.90 -61.10 -64.50 -68.20 -72.20 -76.40 0.754 0.812 0.910 0.968 1.010 1.032 1.047 1.059 1.071 1.076 1.076 1.073 1.063 1.061 K Gmag (dB) 22.950 21.870 20.026 18.367 16.405 14.716 13.443 12.352 11.392 10.577 9.896 9.353 8.942 8.476 UPA806T(Q2) VCE = 2 V, IC = 10 mA FREQUENCY (GHz) 0.50 0.60 0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80 3.00 MAG 0.348 0.297 0.218 0.165 0.131 0.111 0.098 0.090 0.086 0.086 0.091 0.101 0.115 0.134 S11 ANG -77.00 -82.40 -95.00 -110.00 -126.30 -142.60 -158.20 -172.90 173.10 159.80 147.40 136.10 126.00 116.50 MAG 11.024 9.724 7.740 6.376 5.424 4.728 4.192 3.761 3.411 3.129 2.909 2.743 2.611 2.474 S21 ANG 109.80 105.50 96.50 87.80 80.10 73.90 68.90 64.90 61.20 57.10 52.40 47.10 41.80 37.20 MAG 0.050 0.056 0.068 0.081 0.095 0.108 0.122 0.135 0.149 0.163 0.177 0.191 0.205 0.218 S12 ANG 62.90 62.50 61.80 61.00 60.00 58.80 57.40 55.80 54.10 52.20 50.20 48.10 45.90 43.60 MAG 0.590 0.554 0.495 0.451 0.419 0.395 0.377 0.363 0.350 0.338 0.326 0.314 0.302 0.291 S22 ANG -36.20 -37.10 -39.10 -41.20 -43.40 -45.70 -48.10 -50.60 -53.20 -56.10 -59.20 -62.70 -66.50 -70.70 0.739 0.803 0.905 0.971 1.009 1.037 1.054 1.071 1.081 1.088 1.089 1.084 1.075 1.071 K Gmag (dB) 23.434 22.397 20.562 18.961 16.991 15.227 13.945 12.828 11.860 11.023 10.335 9.804 9.382 8.922 Note: 1. Gain Calculation: MAG = |S21| |S12| (K ± K 2- 1 ). When K ≤ 1, MAG is undefined and MSG values are used. MSG = 2 2 2 |S21| , K = 1 + | ∆ | - |S11| - |S22| , ∆ = S11 S22 - S21 S12 |S12| 2 |S12 S21| MAG = Maximum Available Gain MSG = Maximum Stable Gain UPA806T TYPICAL SCATTERING PARAMETERS (TA = 25°C) UPA806T(Q1) VCE = 3 V, IC = 10 mA FREQUENCY (GHz) 0.50 0.60 0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80 3.00 MAG 0.337 0.283 0.198 0.139 0.101 0.080 0.071 0.072 0.077 0.087 0.100 0.115 0.135 0.157 S11 ANG -74.20 -79.00 -90.80 -106.30 -126.10 -149.80 -174.60 163.30 145.60 132.20 122.10 114.40 108.10 102.50 MAG 10.935 9.644 7.669 6.308 5.356 4.662 4.129 3.704 3.358 3.078 2.857 2.687 2.550 2.411 S21 ANG 110.20 106.00 97.40 88.90 81.50 75.50 70.90 67.10 63.70 60.00 55.70 50.70 45.60 41.50 MAG 0.052 0.058 0.072 0.086 0.100 0.114 0.128 0.143 0.157 0.172 0.186 0.200 0.214 0.227 S12 ANG 64.10 64.00 63.60 62.90 62.00 60.90 59.70 58.30 56.70 55.10 53.30 51.40 49.50 47.50 MAG 0.589 0.554 0.496 0.453 0.421 0.398 0.381 0.367 0.356 0.346 0.336 0.327 0.318 0.309 S22 ANG -35.80 -36.70 -38.80 -41.10 -43.70 -46.30 -49.10 -52.00 -54.90 -58.00 -61.20 -64.70 -68.40 -72.30 0.744 0.807 0.898 0.959 0.999 1.024 1.042 1.052 1.063 1.067 1.070 1.066 1.057 1.054 K Gmag (dB) 23.228 22.208 20.274 18.654 17.288 15.163 13.832 12.741 11.767 10.946 10.253 9.717 9.301 8.834 UPA806T(Q2) VCE = 3 V, IC = 10 mA FREQUENCY (GHz) 0.50 0.60 0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60 2.80 3.00 Note: 1. Gain Calculation: MAG = |S21| |S12| S11 MAG 0.364 0.311 0.228 0.170 0.131 0.105 0.086 0.073 0.065 0.063 0.065 0.074 0.088 0.107 ANG -71.90 -76.60 -87.40 -99.80 -113.50 -127.60 -141.90 -156.70 -172.60 170.60 154.00 139.20 126.60 115.70 MAG 11.322 9.999 7.979 6.588 5.613 4.897 4.341 3.895 3.531 3.239 3.012 2.841 2.705 2.563 S21 ANG 111.00 106.60 97.60 88.80 81.20 74.90 70.00 66.00 62.30 58.30 53.60 48.40 43.10 38.60 MAG 0.047 0.053 0.066 0.078 0.091 0.104 0.117 0.130 0.143 0.157 0.171 0.184 0.197 0.210 S12 ANG 63.60 63.20 62.50 61.70 60.70 59.50 58.20 56.60 55.00 53.20 51.20 49.20 47.00 44.80 MAG 0.613 0.578 0.520 0.477 0.445 0.422 0.404 0.390 0.378 0.367 0.355 0.344 0.333 0.322 S22 ANG -34.10 -35.00 -36.90 -39.00 -41.10 -43.30 -45.70 -48.10 -50.60 -53.40 -56.40 -59.70 -63.30 -67.30 K Gmag (dB) 0.734 0.797 0.891 0.960 1.001 1.027 1.047 1.062 1.074 1.079 1.079 1.076 1.068 1.064 23.818 22.757 20.824 19.267 17.712 15.721 14.372 13.244 12.260 11.433 10.738 10.205 9.784 9.320 (K ± K 2- 1 ). When K ≤ 1, MAG is undefined and MSG values are used. MSG = 2 2 2 |S21| , K = 1 + | ∆ | - |S11| - |S22| , ∆ = S11 S22 - S21 S12 |S12| 2 |S12 S21| MAG = Maximum Available Gain MSG = Maximum Stable Gain UPA806T NONLINEAR MODEL BJT NONLINEAR MODEL PARAMETERS(1) Parameters IS BF NF VAF IKF ISE NE BR NR VAR IKR ISC NC RE RB RBM IRB RC CJE VJE MJE CJC VJC Q1 & Q2 7e-16 109 1 15 0.19 7.9e-13 2.19 1 1.08 12.4 Infinity 0 2 1.3 10 8.34 0.009 10 0.4e-12 0.81 0.5 0.18e-12 0.75 Parameters MJC XCJC CJS VJS MJS FC TF XTF VTF ITF PTF TR EG XTB XTI KF AF Q1 & Q2 0.34 0 0 0.75 0 0.5 3e-12 5.2 4.58 0.01 0 1e-9 1.11 0 3 0 1 UNITS Parameter time capacitance inductance resistance voltage current Units seconds farads henries ohms volts amps MODEL RANGE Frequency: 0.1 to 3.0 GHz Bias: VCE =0.5 V to 5 V, IC = 1 mA to 10 mA Date: 10/98 (1) Gummel-Poon Model Note: This nonlinear model utilized the latest data available. See our Design Parameter Library at www.cel.com for this data. UPA806T NONLINEAR MODEL SCHEMATIC 0.07 pF C_C1B2 0.1 pF CCBPKG1 LC Pin_1 0.05 nH 0.14 pF CCB1 LB1 C_C1E1 0.05 pF LE Pin_2 0.05 nH CCE1 0.13 pF LE1 1.1 nH C_E1B2 0.1 pF LB2 0.9 nH C_B1B2 0.05 pF LB 0.05 nH C_B2E2 0.05 pF LE2 1.0 nH 0.13 pF CCE2 0.1 pF CCEPKG2 0.06 pF CCBPKG2 LE 0.05 nH Pin_4 Pin_5 LB 0.05 nH Pin_6 Q1 0.55 nH C_E1C2 0.05 pF CCB2 0.14 pF Q2 LC Pin_3 0.05 nH MODEL RANGE Frequency: 0.1 to 3.0 GHz Bias: VCE = 0.5 V to 5 V, IC = 1 mA to 10 mA Date: 10/98 Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM PRINTED IN USA ON RECYCLED PAPER -12/98 DATA SUBJECT TO CHANGE WITHOUT NOTICE 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability. 5-196