UPC2711TB-E3

BIPOLAR ANALOG INTEGRATED CIRCUITS UPC2711TB, UPC2712TB 5 V, SUPER MINIMOLD SILICON MMIC WIDEBAND AMPLIFIER FEATURES • HIGH DENSITY SURFACE MOUNTING: 6 pin super minimold or SOT- 363 package 25 TYPICAL PERFORMANCE CURVES GAIN vs. FREQUENCY UPC2712TB • SUPPLY VOLTAGE: VCC = 4.5 to 5.5 V • WIDEBAND RESPONSE: UPC2711TB: fu = 2.9 GHz TYP UPC2712TB: fu = 2.6 GHz TYP • POWER GAIN: UPC2711TB: GP = 13 dB TYP UPC2712TB: GP = 20 dB TYP 20 Gain, GP (dB) 15 UPC2711TB 10 DESCRIPTION NEC's UPC2711TB and UPC2712TB are Silicon MMIC Wideband Amplifiers manufactured using NEC's 20 GHz fT NESATTM III silicon bipolar process. These devices are designed for use as buffer amps in DBS tuners. The UPC2711/ 12TB are pin compatible and have comparable performance as the larger UPC2711/12T, so they are suitable for use as a replacement to help reduce system size. These IC's are housed in a 6 pin super minimold or SOT-363 package. NEC's stringent quality assurance and test procedure ensure the highest reliability and performance. 5 0.5 1.0 1.5 2.0 2.5 3.0 Frequency, f (GHz) ELECTRICAL CHARACTERISTICS (TA = +25 °C, VCC = 5.0 V, ZL = ZS = 50 W) PART NUMBER PACKAGE OUTLINE SYMBOLS ICC GP fU ∆GP PO(SAT) NF RLIN RLOUT ISOL PARAMETERS AND CONDITIONS Circuit Current (no signal) Power Gain, f = 1 GHz Upper Limit Operating Frequency (The gain at fU is 3 dB down from the gain at 100 MHz) Gain Flatness, f = 0.1 GHz to 2.5 GHz Maximum Output Level, f = 1 GHz, PIN = 0 dBm Noise Figure, f = 1 GHz Input Return Loss, f = 1 GHz Output Return Loss, f = 1 GHz Isolation, f = 1 GHz UNITS mA dB GHz dB dBm dB dB dB dB 20 9 25 -2 MIN 9 11 2.7 UPC2711TB S06 TYP 12 13 2.9 ±0.8 +1 5 25 12 30 6.5 9 10 28 0 MAX 15 16.5 MIN 9 18 2.2 UPC2712TB S06 TYP 12 20 2.6 ±0.8 +3 4.5 12 13 33 6 MAX 15 23.5 The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Date Published: June 22, 2005 UPC2711TB, UPC2712TB ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS VCC PIN PT TOP TSTG PARAMETERS Supply Voltage Input Power Total Power Dissipation2 Operating Temperature Storage Temperature UNITS V dBm mW °C °C RATINGS 6 +10 200 -45 to +85 -55 to +150 RECOMMENDED OPERATING CONDITIONS SYMBOL VCC TOP PARAMETER Supply Voltage Operating Temperature UNITS V ˚C MIN 4.5 -40 TYP MAX 5.0 +25 5.5 +85 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on double sided copper clad 50 x 50 x 1.6 mm epoxy glass PWB (TA = +85°C). PIN DESCRIPTION Pin No. Pin Name Applied Voltage (V) Description Internal Equivalent Circuit 1 Input Signal input pin. An internal matching circuit, configured with resistors, enables 50 Ω connection over a wide bandwidth. A multi-feedback circuit is designed to cancel the deviations of hFE and resistance. This pin must be coupled to the signal source with a blocking capacitor. Signal output pin. An internal matching circuit, configured with resistors, enables 50 Ω connection over a wide bandwidth. This pin must be coupled to the output load with a blocking capacitor. 4.5 to 5.5 Power supply pin. This pin should be externally equipped with a bypass capacitor to minimize ground impedance. Ground pin. This pin should be connected to system ground with minimum inductance. Ground pattern on the board should be formed as wide as possible. All the ground pins must be connected together with wide ground pattern to minimize impedance difference. 6 4 4 Output 1 6 VCC 2 3 5 GND 0 2 3 5 UPC2711TB, UPC2712TB TYPICAL PERFORMANCE CURVES (TA = 25°C) UPC2711TB CURRENT vs. VOLTAGE 20 18 16 20 VCC = 5.0 V 18 16 UPC2711TB CURRENT vs. TEMPERATURE Current, ICC (mA) 14 12 10 8 6 4 2 0 1 2 3 4 5 6 Current, ICC (mA) 14 12 10 8 6 4 2 0 -60 -40 -20 0 20 40 60 80 100 Voltage, VCC (V) UPC2711TB GAIN AND NOISE FIGURE vs. FREQUENCY AND VOLTAGE 20 VCC = 5.5 V 15 GS 10 VCC = 4.5 V 7 Temperature, TA (°C) UPC2711TB GAIN vs. FREQUENCY AND TEMPERATURE 15 TA = -40°C TA = +25°C TA = +25°C VCC = 5.0 V 8 Noise Figure, NF (dB) Gain, GS (dB) Gain, GS (dB) TA = +85°C TA = -40°C TA = +25°C 10 5 VCC = 5.5 V 6 0 VCC = 4.5 V -5 0.1 NF VCC = 5.0 V 5 4 0.3 1.0 3.0 5 0.1 0.3 1.0 VCC = 5.0 V 3.0 Frequency, f (GHz) Frequency, f (GHz) UPC2711TB INPUT RETURN LOSS AND OUTPUT RETURN LOSS vs. FREQUENCY 0 VCC = 5.0 V UPC2711TB ISOLATION vs. FREQUENCY 0 VCC = 5.0 V -10 Input Return Loss, RLIN (dB) Output Return Loss, RLOUT (dB) Isolation, ISOL, (dB) -10 -20 RLOUT -20 RLIN -30 -30 -40 -50 0.1 0.3 1.0 3.0 -40 0.1 0.3 1.0 3.0 Frequency, f (GHz) Frequency, f (GHz) UPC2711TB, UPC2712TB TYPICAL PERFORMANCE CURVES (TA = 25°C) UPC2711TB OUTPUT POWER vs. INPUT POWER VOLTAGE 5 f = 1.0 GHz 5.5 V UPC2711TB OUTPUT POWER vs. INPUT POWER AND TEMPERATURE 5 VCC = 5.0 V f = 1.0 GHz +85°C Output Power, POUT (dBm) 0 VCC = 5.0 V -5 4.5 V Output Power, POUT (dBm) 0 TA = +25°C -5 -40°C -20°C -10 -10 -15 -15 -20 -35 -30 -25 -20 -15 -10 -5 0 5 -20 -35 -30 -25 -20 -15 -10 -5 0 5 Input Power, PIN (dBm) UPC2711TB OUTPUT POWER vs. INPUT POWER AND VOLTAGE 5 f = 2.0 GHz 5.5 V 5 Input Power, PIN (dBm) UPC2711TB OUTPUT POWER vs. INPUT POWER AND FREQUENCY VCC = 5.0 V f = 0.5 GHz Output Power, POUT (dBm) 0 Output Power, POUT (dBm) 0 VCC = 5.0 V -5 4.5 V f = 1.0 GHz -5 f = 2.0 GHz f = 2.9 GHz -10 -10 -15 -15 -20 -35 -30 -25 -20 -15 -10 -5 0 5 -20 -35 -30 -25 -20 -15 -10 -5 0 5 Input Power, PIN (dBm) UPC2711TB SATURATED OUTPUT POWER vs. FREQUENCY AND VOLTAGE 10 Input Power, PIN (dBm) UPC2711TB 3RD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER AND VOLTAGE 0 Saturated Output Power, PSAT (dBm) VCC = 5.0 V 5 3rd Order Intermodulation Distortion, IM3 (dBc) 5.5 V PIN = 0 dBm f1 = 1.000 GHz f2 = 1.002 GHz -10 0 4.5 V -5 -20 VCC = 5.0 V -30 4.5 V -10 -40 5.5 V -50 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 -15 0.1 0.3 1.0 3.0 Frequency, f (GHz) Output Power of Each Tone, POUT(each) (dBm) UPC2711TB, UPC2712TB TYPICAL PERFORMANCE CURVES (TA = 25°C) UPC2712TB CURRENT vs. VOLTAGE 20 18 16 20 VCC = 5.0 V 18 16 UPC2712TB CURRENT vs. TEMPERATURE Current, ICC (mA) 12 10 8 6 4 2 0 1 2 3 4 5 6 Current, ICC (mA) 14 14 12 10 8 6 4 2 0 -60 -40 -20 0 20 40 60 80 100 Voltage, VCC (V) UPC2712TB GAIN AND NOISE FIGURE vs. FREQUENCY AND VOLTAGE 30 Temperature, TA (°C) UPC2712TB GAIN vs. FREQUENCY AND TEMPERATURE 25 VCC = 5.0 V 25 VCC = 5.5 V VCC = 5.0 V GS 20 10 Noise Figure, NF (dB) Gain, GS (dB) Gain, GS (dB) 8 -40°C 20 TA = +85°C +25°C 15 NF VCC = 4.5 V 6 10 VCC = 5.5 V 5 0.1 VCC = 5.0 V 4 2 0.3 1.0 3.0 15 0.1 0.3 1.0 3.0 Frequency, f (GHz) Frequency, f (GHz) UPC2712TB INPUT RETURN LOSS AND OUTPUT RETURN LOSS vs. FREQUENCY 0 VCC = 5.0 V UPC2712TB ISOLATION vs. FREQUENCY 0 VCC = 5.0 V -10 nput Return Loss, RLIN (dB) Output Return Loss, RLOUT (dB) Isolation, ISOL, (dB) -10 RLIN -20 -20 RLOUT -30 -30 -40 -50 0.1 0.3 1.0 3.0 -40 0.1 0.3 1.0 3.0 Frequency, f (GHz) Frequency, f (GHz) UPC2711TB, UPC2712TB TYPICAL PERFORMANCE CURVES (TA = 25°C) UPC2712TB OUTPUT POWER vs. INPUT POWER VOLTAGE 10 f = 1.0 GHz 5.5 V 5 UPC2712TB OUTPUT POWER vs. INPUT POWER AND TEMPERATURE 10 VCC = 5.0 V f = 1.0 GHz 5 +85°C Output Power, POUT (dBm) Output Power, POUT (dBm) 0 VCC = 5.0 V -5 4.5 V 0 -5 TA = +25°C -40°C -10 -15 -10 -15 -20 -25 -45 -40 -20 -25 -40 -35 -30 -25 -20 -15 -10 -5 0 5 -35 -30 -25 -20 -15 -10 -5 0 5 Input Power, PIN (dBm) UPC2712TB OUTPUT POWER vs. INPUT POWER AND VOLTAGE 10 f = 2.0 GHz 5.5 V 5 5 10 Input Power, PIN (dBm) UPC2712TB OUTPUT POWER vs. INPUT POWER AND FREQUENCY VCC = 5.0 V f = 0.5 GHz Output Power, POUT (dBm) 0 -5 4.5 V -10 -15 Output Power, POUT (dBm) 0 f = 1.0 GHz -5 f = 2.0 GHz VCC = 5.0 V -10 -15 -20 -25 -40 -20 -25 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 5 -35 -30 -25 -20 -15 -10 -5 0 5 Input Power, PIN (dBm) UPC2712TB SATURATED OUTPUT POWER vs. FREQUENCY AND VOLTAGE 10 Input Power, PIN (dBm) UPC2712TB 3RD ORDER INTERMODULATION DISTORTION vs. OUTPUT POWER AND VOLTAGE 0 Saturated Output Power, PSAT (dBm) VCC = 5.0 V 3rd Order Intermodulation Distortion, IM3 (dBc) 5.5 V PIN = 2 dBm f1 = 1.000 GHz f2 = 1.002 GHz -10 5 -20 VCC = 5.0 V 0 4.5 V -30 4.5 V -5 -40 5.5 V -50 -16 -10 0.1 0.3 1.0 3.0 -14 -12 -10 -8 -6 -4 -2 0 Frequency, f (GHz) Output Power of Each Tone, POUT(each) (dBm) UPC2711TB, UPC2712TB TYPICAL SCATTERING PARAMETERS (TA = 25°C) UPC2711TB VCC = 5 V, ICC = 13.8 mA FREQUENCY (MHz) 100.00 200.00 300.00 400.00 500.00 600.00 700.00 800.00 900.00 1000.00 1100.00 1200.00 1300.00 1400.00 1500.00 1600.00 1700.00 1800.00 1900.00 2000.00 2100.00 2200.00 2300.00 2400.00 2500.00 2600.00 2700.00 2800.00 2900.00 3000.00 MAG 0.085 0.086 0.098 0.081 0.066 0.041 0.053 0.070 0.098 0.101 0.090 0.060 0.019 0.023 0.062 0.087 0.113 0.126 0.154 0.178 0.212 0.232 0.246 0.248 0.240 0.238 0.240 0.262 0.285 0.316 S11 ANG -22.40 -25.00 -29.20 -29.40 -33.90 -54.50 -104.30 -119.70 -121.90 -112.50 -108.50 -95.60 -79.20 54.80 80.70 80.40 78.70 72.00 63.50 59.00 54.20 55.20 53.80 53.60 49.20 43.70 36.20 31.70 28.80 29.70 MAG 4.447 4.468 4.491 4.510 4.540 4.572 4.624 4.664 4.729 4.781 4.843 4.945 4.999 5.062 5.114 5.142 5.160 5.146 5.123 5.113 5.063 5.006 4.954 4.865 4.783 4.664 4.529 4.384 4.255 4.117 S21 ANG -14.90 -30.10 -44.90 -60.30 -74.90 -90.20 -105.30 -120.70 -136.10 -152.00 -167.90 175.80 159.50 143.00 126.40 109.50 92.70 75.40 58.00 41.30 24.00 6.90 -10.40 -27.70 -45.00 -62.30 -79.60 -96.60 -113.10 -129.60 MAG 0.035 0.035 0.034 0.033 0.033 0.033 0.032 0.031 0.032 0.031 0.031 0.029 0.029 0.028 0.029 0.029 0.029 0.030 0.032 0.035 0.036 0.038 0.041 0.045 0.048 0.049 0.052 0.054 0.056 0.057 S12 ANG -12.70 -23.00 -32.10 -42.50 -50.10 -59.60 -69.30 -78.40 -86.60 -94.90 -103.90 -111.00 -120.20 -128.90 -133.10 -140.90 -146.20 -151.40 -159.70 -168.30 -175.70 175.20 165.20 155.30 143.60 131.20 119.80 108.70 95.50 83.60 MAG 0.113 0.119 0.136 0.142 0.156 0.161 0.161 0.176 0.192 0.228 0.256 0.290 0.308 0.322 0.327 0.333 0.344 0.356 0.371 0.378 0.383 0.378 0.367 0.359 0.356 0.359 0.366 0.374 0.372 0.361 S22 ANG -3.10 1.20 1.60 6.50 10.10 12.70 8.80 6.20 1.90 0.10 -0.60 -1.10 -0.30 -1.40 -2.20 -4.80 -7.00 -9.70 -11.10 -12.00 -12.80 -13.60 -16.10 -18.00 -21.10 -23.60 -26.20 -28.60 -31.10 -35.00 3.18 3.21 3.23 3.34 3.32 3.34 3.33 3.36 3.27 3.29 3.15 3.24 3.16 3.18 3.08 3.07 3.02 2.88 2.70 2.51 2.39 2.27 2.13 1.99 1.88 1.85 1.76 1.72 1.68 1.69 K UPC2711TB, UPC2712TB TYPICAL SCATTERING PARAMETERS (TA = 25°C) UPC2712TB VCC = 5 V, ICC = 13.9 mA FREQUENCY (MHz) 100.00 200.00 300.00 400.00 500.00 600.00 700.00 800.00 900.00 1000.00 1100.00 1200.00 1300.00 1400.00 1500.00 1600.00 1700.00 1800.00 1900.00 2000.00 2100.00 2200.00 2300.00 2400.00 2500.00 2600.00 2700.00 2800.00 2900.00 3000.00 MAG 0.303 0.291 0.295 0.276 0.265 0.243 0.222 0.219 0.230 0.267 0.290 0.316 0.317 0.314 0.296 0.290 0.278 0.282 0.284 0.280 0.273 0.244 0.222 0.189 0.177 0.164 0.158 0.143 0.128 0.111 S11 ANG -8.10 -10.10 -11.80 -11.30 -11.00 -12.30 -20.30 -25.40 -33.90 -35.50 -35.50 -33.20 -30.60 -29.40 -28.10 -29.40 -31.10 -34.90 -35.50 -36.60 -36.00 -38.20 -40.00 -45.70 -52.90 -57.40 -59.60 -53.90 -44.30 -22.20 MAG 8.864 8.827 8.936 9.044 9.051 9.096 9.089 9.080 9.096 9.044 9.197 9.421 9.524 9.512 9.574 9.598 9.480 9.372 9.193 9.198 9.011 8.784 8.717 8.388 8.217 7.890 7.597 7.313 7.078 6.086 S21 ANG -16.70 -33.50 -49.50 -67.60 -82.20 -98.80 -115.20 -131.50 -147.60 -164.20 179.50 162.40 144.90 126.60 109.10 91.10 72.90 54.30 35.60 18.40 0.10 -17.90 -35.10 -52.90 -70.10 -87.40 -104.60 -121.40 -138.40 -154.90 MAG 0.023 0.023 0.022 0.023 0.023 0.023 0.023 0.023 0.023 0.024 0.024 0.024 0.024 0.026 0.026 0.027 0.028 0.029 0.030 0.031 0.033 0.033 0.034 0.036 0.037 0.039 0.041 0.041 0.043 0.046 S12 ANG -11.40 -19.20 -25.50 -34.60 -42.80 -50.00 -59.80 -66.20 -73.00 -82.90 -89.50 -98.40 -107.00 -115.70 -122.30 -133.20 -139.40 -148.10 -157.60 -167.40 -175.10 176.50 164.80 154.80 143.50 133.30 123.80 114.00 101.40 90.20 MAG 0.043 0.055 0.078 0.095 0.112 0.120 0.120 0.136 0.155 0.189 0.212 0.240 0.245 0.248 0.236 0.231 0.221 0.215 0.199 0.170 0.134 0.090 0.050 0.025 0.039 0.071 0.099 0.131 0.149 0.157 S22 ANG 2.30 11.50 8.50 13.40 13.60 11.10 1.70 -6.00 -14.40 -17.50 -19.90 -21.40 -23.20 -27.10 -31.80 -38.00 -43.80 -49.80 -53.00 -55.30 -56.20 -55.20 -53.70 1.80 33.40 39.30 34.30 26.00 22.80 19.40 2.32 2.35 2.38 2.33 2.37 2.35 2.37 2.38 2.39 2.26 2.12 2.02 1.94 1.82 1.78 1.74 1.72 1.69 1.70 1.69 1.68 1.74 1.74 1.75 1.74 1.72 1.70 1.72 1.70 1.70 K UPC2711TB, UPC2712TB OUTLINE DIMENSIONS (Units in mm) PACKAGE OUTLINE S06 2.1±0.1 1.25±0.1 2.0±0.2 0.65 3 1.3 0.65 2 PIN CONNECTIONS (Top View) 3 0.2 +0.1 -0 (Bottom View) 4 5 6 4 5 6 3 2 1 C1G 4 2 1 5 1 6 DOT ON BACK SIDE 0.9 ± 0.1 0.7 Marking is an example of UPC2711TB 1. Input 4. Output 2. GND 5. GND 3. GND 6. VCC 0 ~0.1 +0.1 0.15 -0.5 TEST CIRCUIT VCC 1000 pF ORDERING INFORMATION (Solder Contains Lead) PART NUMBER UPC2711TB-E3 UPC2712TB-E3 MARKING C1G C1H QTY 3K/reel 3K/reel Note: Embossed tape, 8 mm wide. Pins 1, 2, and 3 face perforated side of tape. 6 50 Ω IN 1000 pF 1 2, 3, 5 4 1000 pF 50 Ω OUT ORDERING INFORMATION (Pb-Free) PART NUMBER UPC2711TB-E3-A UPC2712TB-E3-A MARKING C1G C1H QTY 3K/reel 3K/reel Note: Embossed tape, 8 mm wide. Pins 1, 2, and 3 face perforated side of tape. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. C1G A Business Partner of NEC Compound Semiconductor Devices, Ltd. 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.