UPC2747TB

3 V, SUPER MINIMOLD UPC2747TB 900 MHz Si MMIC AMPLIFIER UPC2748TB FEATURES • HIGH DENSITY SURFACE MOUNTING: 6 pin super minimold or SOT-363 package • GAIN: UPC2747TB: Gs = 12 dB TYP UPC2748TB: Gs = 19 dB TYP Gain, GS (dB) GAIN vs. FREQUENCY VCC = 3.0 V 20 18 16 14 12 GS 10 8 6 0 0 1000 2000 GS UPC2747TB UPC2748TB • NOISE FIGURE: UPC2747TB: NF = 3.3 dB TYP UPC2748TB: NF = 2.8 dB TYP • SUPPLY VOLTAGE: VCC = 2.7 to 3.3 V DESCRIPTION NEC's UPC2747TB and UPC2748TB are Silicon RFIC's which are manufactured using the NESAT III process. These devices are suitable as buffer amplifiers for cellular radio and other communication receivers. The UPC2747TB/48TB are pin compatible and have comparable performance as the larger UPC2747T/48T, so they are suitable for use as a replacement to help reduce system size. The IC's are housed in a 6 pin super minimold or SOT-363 package. NEC's stringent quality assurance and test procedures ensure the highest reliability and performance. Frequency, f (MHz) ELECTRICAL CHARACTERISTICS (TA = 25°C, ZL = ZS = 50 Ω) PART NUMBER PACKAGE OUTLINE SYMBOLS ICC GS fL1 fU2 PSAT NF RLIN RLOUT ISOL OIP3 PARAMETERS AND CONDITIONS Circuit Current (no signal)VCC = 3.0 V VCC = 1.8 V Small Signal Gain, f = 900 MHz, VCC = 3.0 V f = 900 MHz, VCC = 1.8 V UNITS mA mA dB dB GHz GHz GHz GHz dBm dBm dB dB dB dB dB dB dB dB dBm dBm °C/W 11 7 35 1.5 -9.5 1.8 1.8 -7 -14 3.3 5.2 14 11 10 13 40 34 -3 -10 325 4.5 8.5 5.5 35 1.2 -6 UPC2747TB SO6 MIN 3.8 9 TYP 5.0 3.0 12 5.5 MAX 7.0 14 MIN 4.5 16 UPC2748TB SO6 TYP 6.0 3.5 19 11.5 0.2 0.2 1.5 1.5 -3.5 -10 2.8 4.5 11.5 10 8.5 12 40 34 -1 -6 325 4.0 MAX 8.0 21 0.4 Lower Limit Operating Frequency, VCC = 3.0 V VCC = 1.8 V Upper Limit Operating Frequency, VCC = 3.0 V VCC = 1.8 V Saturated Output Power, f = 900 MHz, VCC = 3.0 V f = 900 MHz, VCC = 1.8 V Noise Figure, Input Return Loss, Output Return Loss, Isolation, f = 900 MHz, VCC = 3.0 V f = 900 MHz, VCC = 1.8 V f = 900 MHz, VCC = 3.0 V f = 900 MHz, VCC = 1.8 V f = 900 MHz, VCC = 3.0 V f = 900 mHz, VCC = 1.8 V f = 900 MHz, VCC = 3.0 V f = 900 MHz, VCC = 1.8 V SSB Output Third Order Intercept, POUT = -20 dBm f1 = 900 MHz, f2 = 902 MHz, VCC = 3.0 V RTH (J-A) f1 = 900 MHz, f2 = 902 MHz, VCC = 1.8 V Thermal Resistance (Junction to Ambient) Mounted on a 50 x 50 x 1.6 mm epoxy glass PWB Note: 1.The gain at fL is 3 dB down from the gain at 900 MHz. 2.The gain at fU is 3 dB down from the gain at 900 MHz. California Eastern Laboratories UPC2747TB, UPC2748TB ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS VCC ICC PIN PT TOP TSTG PARAMETERS Supply Voltage Total Supply Current Input Power Total Power Dissipation2 Operating Temperature Storage Temperature UNITS V mA dBm mW °C °C RATINGS 4.0 15 0 200 -40 to +85 -55 to +150 RECOMMENDED OPERATING CONDITIONS SYMBOLS VCC TOP PARAMETERS Supply Voltage Operating Temperature UNITS MIN V °C 2.7 -40 TYP MAX 3 25 3.3 85 TEST CIRCUIT VCC 1000 pF C3 6 50 Ω IN C1 1000 pF 1 2, 3, 5 4 C2 1000 pF 50 Ω OUT Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on a 50 x 50 x 1.6 mm epoxy glass PWB (TA = 85°C). TYPICAL PERFORMANCE CURVES (TA = 25°C) CURRENT vs. SUPPLY VOLTAGE 10 CURRENT vs. OPERATING TEMPERATURE 10 Circuit Current, ICC (mA) Circuit Current, ICC (mA) 8 8 VCC = 3.3 V 6 VCC = 3.0 V 4 1.8 V 1.8 V 2 UPC2747TB 0 -60 -40 -20 0 20 40 UPC2748TB 60 80 100 6 4 2 UPC2747TB 0 0 1 2 3 UPC2748TB 4 5 Supply Voltage, VCC (V) Operating Temperature TOP (°C) UPC2747TB GAIN vs. FREQUENCY AND TEMPERATURE 14 UPC2747TB GAIN AND NOISE FIGURE vs. FREQUENCY 15 VCC = 3.3 V 3.0 V 10 2.7 V -40˚C +25˚C +85˚C 10 1.8 V 5 5 VCC = 3.3 V 0 8 Vcc = 3.0 V Icc = 5 mA 4 3.0 V 3 2.7 V -5 2 0.01 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3.0 0 1000 2000 Frequency, f (MHz) Frequency, f (MHz) Noise Figure, NF (dB) 12 Gain, GS (dB) Gain, GS (dB) UPC2747TB, UPC2748TB TYPICAL PERFORMANCE CURVES (TA = 25°C) UPC2747TB RETURN LOSS vs. FREQUENCY 0 RLout (VCC = 3.0 V) 0 UPC2747TB ISOLATION vs. FREQUENCY Input Return Loss, RLIN (dB) Output Return Loss, RLOUT (dB) RLin (VCC = 1.8 V) 10 10 RLout (VCC = 1.8 V) 20 RLin (VCC = 3.0 V) 30 Isolation, ISOL (dB) 20 1.8 V 30 40 VCC = 3.0 V 40 50 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3.0 50 0.01 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3.0 Frequency, f (GHZ) UPC2747TB POWER vs. FREQUENCY Frequency, f (GHZ) UPC2747TB POWER vs. FREQUENCY PSAT Psat Output Power, (dBm) Output Power (dBm) -8.0 -16 -10.0 -18 P1dB P1dB -12.0 VCC = 3.0 V ICC = 5 mA -20 VCC = 1.8 V ICC = 3 mA 0 1000 2000 0 1000 2000 Frequency, f (MHz) Frequency, f (MHz) UPC2747TB OUTPUT POWER vs. INPUT POWER AND VOLTAGE 0 f = 900 MHZ VCC = 3.3 V UPC2747TB OUTPUT POWER vs. INPUT POWER AND TEMPERATURE 0 VCC = 3.0 V f = 900 MHZ TA = +85˚ C Output Power, POUT (dBm) 3.0 V -10 2.7 V Output Power, POUT (dBm) -10 +25˚ C -40˚ C -20 +85˚ C -40˚ C +25˚ C -20 -30 -40 -30 -20 -10 0 -30 -40 -30 -20 -10 0 Input Power PIN (dBm) Input Power PIN (dBm) UPC2747TB, UPC2748TB TYPICAL PERFORMANCE CURVES (TA = 25°C) UPC2748TB GAIN vs. FREQUENCY AND TEMPERATURE 20 -40˚C UPC2748TB GAIN and NOISE FIGURE vs. FREQUENCY 20 VCC = 3.3 V 6 VCC = 3.0 V VCC = 2.7 V 10 VCC = 1.8 V 5 VCC = 2.7 V VCC = 3.0 V VCC = 3.3 V 0 2 2.7 3.0 3 4 16 +85˚C 14 VCC = 3.0 V ICC = 6 mA 0 1000 2000 0.01 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 Frequency, f (MHz) UPC2748TB ISOLATION vs. FREQUENCY 0 Frequency, f (GHz) UPC2748TB RETURN LOSS vs. FREQUENCY 0 RLin (VCC = 1.8 V) Input Return Loss RLin (dB) Output Return Loss RLout (dB) RLout (VCC = 3.0 V) 10 -10 Isolation, ISOL (dB) -20 VCC = 3.0 V -30 1.8 V 20 RLOUT (VCC = 1.8 V) 30 RLIN (VCC = 3.0 V) -40 1.8 V VCC = 3.0 V -50 0.01 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3.0 40 50 0.01 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3.0 Frequency, f (GHZ) Frequency, f (GHZ) UPC2748TB POWER vs. FREQUENCY UPC2748TB POWER vs. FREQUENCY Psat -4.0 -12.0 PSAT Output Power, (dBm) - 8.0 P1dB Output Power, (dBm) -16.0 P1dB VCC = 3.0 V ICC = 6 mA -12.0 0 1000 2000 -20.0 0 VCC = 1.8 V ICC = 3.5 mA 1000 2000 Frequency, f (MHz) Frequency, f (MHz) Noise Figure NF (dB) 18 +25˚C 15 5 Gain, GS (dB) Gain, GS (dB) UPC2747TB, UPC2748TB TYPICAL PERFORMANCE CURVES (TA = 25°C) UPC2748TB OUTPUT POWER vs. INPUT POWER AND VOLTAGE 0 VCC = 3.3 V UPC2748TB OUTPUT POWER vs. INPUT POWER AND TEMPERATURE 0 TA = +85˚ C Output Power, (dBm) Output Power, (dBm) 3.0 V -10 2.7 V -40 ˚ C -10 +25˚ C -40 ˚ C +25˚ C -20 TA = +85˚ C -20 f = 900 MHZ -30 -40 -30 -20 -10 0 VCC = 3.0 V f = 900 MHZ -30 -40 -30 -20 -10 0 Input Power, PIN (dBm) Input Power, PIN (dBm) PIN DESCRIPTION Pin No. Pin Name Applied Voltage (V) 0.81 0.82 Description Internal Equivalent Circuit 1 Input Signal input pin. An internal matching circuit, configured with resistors, enables 50 Ω connection over a wide bandwidth. A multi-feedback circuit is designed to cancel the deviations of hFE and resistance. This pin must be coupled to the signal source with a blocking capacitor. IN VCC 6 OUT 4 1 4 Output 2.791 2.722 Signal output pin. An internal matching circuit, configured with resistors, enables 50 Ω connection over a wide bandwidth. This pin must be coupled to the output load with a blocking capacitor. Power supply pin. This pin should be externally equipped with a bypass capacitor to minimize ground impedance. Ground pin. This pin should be connected to system ground with minimum inductance. Ground pattern on the board should be formed as wide as possible. All the ground pins must be connected together with wide ground pattern to minimize impedance difference. 3 GND 2 GND 5 6 VCC 2.7 to 3.3 2 3 5 GND 0 The above diagram is for the UPC2747TB. The resistor marked with a star does not exist in the UPC 2748TB. Notes: 1. UPC2747TB. 2. UPC2748TB. UPC2747TB, UPC2748TB TYPICAL SCATTERING PARAMETERS (TA = 25˚C) 1.0 G 3.0 G 2.0 G 0.1 G 0.1 G 1.0 G 3.0 G 2.0 G S11 UPC2747TB Coordinates in Ohms Frequency in GHz VCC = VOUT = 3.0 V S22 VCC = VOUT = 3.0 V, ICC = 5.0 mA FREQUENCY GHz 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 MAG 0.091 0.105 0.136 0.165 0.179 0.185 0.189 0.189 0.182 0.180 0.174 0.160 0.148 0.134 0.124 0.110 0.099 0.089 0.084 0.085 0.087 0.092 0.102 0.114 0.126 0.136 0.154 0.168 0.180 0.196 0.208 S11 ANG -178.3 -161.2 -166.8 -172.9 177.8 170.1 162.5 155.1 148.8 142.6 137.1 131.5 127.4 124.4 121.0 121.0 122.9 126.8 134.8 141.7 148.1 152.1 156.6 158.7 161.4 160.6 161.3 160.4 157.9 155.2 152.5 MAG 3.732 3.997 4.075 4.105 4.141 4.098 4.124 4.104 4.061 4.016 3.977 3.948 3.799 3.736 3.582 3.506 3.317 3.190 3.040 2.901 2.736 2.645 2.507 2.395 2.312 2.218 2.136 2.036 1.952 1.847 1.757 S21 ANG -3.9 -13.3 -23.4 -32.9 -41.2 -49.5 -57.9 -66.3 -74.5 -83.0 -91.8 -99.5 -108.4 -115.9 -124.0 -131.7 -138.8 -145.7 -152.8 -159.0 -164.8 -170.8 -176.3 177.8 172.9 168.1 162.1 157.8 151.6 147.6 141.6 MAG 0.001 0.002 0.002 0.004 0.004 0.005 0.006 0.008 0.009 0.012 0.013 0.015 0.016 0.019 0.022 0.023 0.025 0.028 0.030 0.032 0.034 0.035 0.037 0.038 0.041 0.042 0.042 0.044 0.044 0.043 0.045 S12 ANG 28.0 103.2 76.0 90.4 89.4 90.7 96.6 101.3 99.2 99.9 100.3 105.5 96.6 93.8 93.8 88.1 88.6 88.3 80.2 78.7 77.6 73.0 72.5 68.5 66.2 64.0 60.4 54.8 53.0 47.2 44.0 MAG 0.290 0.294 0.292 0.286 0.298 0.302 0.307 0.309 0.313 0.316 0.318 0.318 0.318 0.313 0.311 0.312 0.308 0.305 0.305 0.303 0.299 0.304 0.304 0.305 0.317 0.319 0.323 0.331 0.330 0.332 0.331 S22 ANG -3.7 -4.3 -3.9 -5.6 -6.9 -8.4 -10.2 -12.2 -14.4 -16.9 -19.7 -22.6 -24.9 -27.4 -30.1 -31.8 -33.3 -35.1 -37.2 -38.8 -40.9 -41.5 -42.2 -44.7 -45.8 -47.8 -50.8 -54.1 -57.5 -60.9 -65.5 K 98.96 64.71 46.80 29.99 25.94 20.69 17.38 12.59 12.26 9.45 8.22 7.49 7.42 6.36 5.83 5.55 5.37 5.05 4.98 4.97 4.99 4.97 4.93 5.01 4.76 4.78 4.88 4.88 5.07 5.45 5.49 UPC2747TB, UPC2748TB TYPICAL SCATTERING PARAMETERS (TA = 25˚C) 1.0 G 0.1 G 2.0 G 0.1 G 3.0 G 1.0 G S11 UPC2748TB Coordinates in Ohms Frequency in GHz VCC = VOUT = 3.0 V S22 VCC = VOUT = 3.0 V, ICC = 6.0 mA FREQUENCY GHz 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 MAG 0.120 0.136 0.166 0.194 0.210 0.213 0.213 0.211 0.203 0.193 0.180 0.159 0.136 0.115 0.096 0.072 0.049 0.024 0.007 0.014 0.034 0.047 0.063 0.079 0.094 0.108 0.123 0.139 0.151 0.164 0.178 S11 ANG -177.2 -167.3 -174.2 179.6 169.6 160.0 150.2 140.8 131.1 121.1 110.8 100.6 90.6 79.2 70.4 60.9 47.5 36.5 -6.0 -126.0 -141.3 -147.7 -156.9 -161.1 -165.5 -169.0 -174.7 -178.9 175.9 170.5 166.0 MAG 4.730 5.430 5.930 6.314 6.701 6.876 7.203 7.310 7.354 7.371 7.346 7.334 7.001 6.834 6.437 6.181 5.710 5.372 5.014 4.724 4.405 4.175 3.933 3.738 3.579 3.411 3.283 3.107 2.989 2.814 2.680 S21 ANG 5.3 -0.2 -9.2 -18.8 -28.2 -38.8 -49.3 -60.6 -71.5 -81.9 -92.8 -102.4 -112.6 -121.3 -130.1 -138.2 -145.4 -152.5 -158.6 -164.1 -169.7 -174.7 -179.5 175.3 171.2 166.5 161.4 157.3 151.4 147.3 141.5 MAG 0.000 0.001 0.001 0.003 0.004 0.005 0.006 0.009 0.010 0.012 0.014 0.015 0.016 0.018 0.019 0.020 0.020 0.021 0.021 0.024 0.024 0.026 0.026 0.028 0.030 0.030 0.032 0.031 0.032 0.033 0.034 S12 ANG -30.4 19.3 97.8 125.4 108.7 107.4 98.7 114.1 107.6 98.3 99.1 97.5 91.4 84.1 84.8 82.4 78.9 73.5 74.1 74.9 71.5 73.6 71.2 69.1 63.8 64.7 64.6 58.9 53.2 51.6 47.3 MAG 0.280 0.285 0.286 0.291 0.306 0.319 0.337 0.349 0.360 0.371 0.366 0.359 0.342 0.320 0.296 0.271 0.247 0.228 0.208 0.198 0.188 0.190 0.185 0.192 0.202 0.214 0.222 0.238 0.240 0.251 0.254 S22 ANG -2.2 -2.4 -0.9 -2.7 -3.7 -5.4 -8.4 -12.3 -17.4 -22.7 -28.9 -35.3 -40.7 -46.0 -50.5 -53.0 -55.1 -55.7 -55.7 -52.8 -52.1 -47.8 -45.3 -44.7 -43.2 -43.6 -45.7 -47.6 -52.4 -55.8 -61.4 K 352.73 72.83 52.47 24.77 16.82 12.40 10.09 6.68 5.68 4.71 3.98 4.01 3.95 3.71 3.77 3.81 4.13 4.22 4.57 4.37 4.70 4.44 4.81 4.58 4.48 4.59 4.54 4.83 4.84 4.99 5-07 UPC2747TB, UPC2748TB OUTLINE DIMENSIONS (Units in mm) PACKAGE OUTLINE S06 (Top View) 2.1±0.1 3 4 4 3 PIN CONNECTIONS (Top View) (Bottom View) 1.25±0.1 2 C1S 5 5 2 2.0±0.2 3 0.65 4 1 6 6 1 +0.10 0.22 -0.05 1.3 2 5 (All Leads) *Marking is an example of UPC2747TB 1 6 0.9±0.1 0.45 0 to 0.1 0.13±0.05 1. 2. 3. 4. 5. 6. INPUT GND GND OUTPUT GND VCC SYSTEM APPLICATION EXAMPLE DIGITAL CELLULAR SYSTEM BLOCK DIAGRAM Example of 900 MHz Band Digital Cellular Phone RX DEMO I Q SW PSC+PLL PLL I 0˚ TX PA φ 90˚ Q UPC2747TB, UPC2748TB applicable ORDERING INFORMATION PART NUMBER UPC2747TB-E3-A UPC2748TB-E3-A MARKING C1S C1T QTY 3K/Reel 3K/Reel Note: Embossed Tape, 8 mm wide. Pins1, 2 and 3 face perforated side of tape. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM 05/11/2000 DATA SUBJECT TO CHANGE WITHOUT NOTICE 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.