UPC2791TB-E3-A

PRELIMINARY DATA SHEET UPC2791TB, UPC2792TB 5 V, SUPER MINIMOLD SILICON MMIC WIDEBAND AMPLIFIER FEATURES • HIGH DENSITY SURFACE MOUNTING: 6 pin super minimold or SOT- 363 package • SUPPLY VOLTAGE: VCC = 4.5 to 5.5 V • WIDEBAND RESPONSE: UPC2791TB: fu = 1.9 GHz TYP UPC2792TB: fu = 1.2 GHz TYP • POWER GAIN: UPC2791TB: GP = 12 dB TYP UPC2792TB: GP = 20 dB TYP 20 TYPICAL PERFORMANCE CURVES GAIN vs. FREQUENCY Gain, GP (dB) UPC2792TB 15 10 UPC2791TB DESCRIPTION NEC's UPC2791TB and UPC2792TB are Silicon MMIC Wideband Amplifiers manufactured using NEC's 10 GHz fT NESATTM II silicon bipolar process. These devices are designed for use as second IF buffer amps in DBS tuners. The UPC2791/92TB are pin compatible and their performance is comparable to the larger UPC1675/76G, so they are suitable for use as a replacement to help reduce system size. These IC's are housed in a 6 pin super minimold or SOT-363 package. NEC's stringent quality assurance and test procedure ensure the highest reliability and performance. 5 0 0.5 1.0 1.5 2.0 Frequency, f (GHz) ELECTRICAL CHARACTERISTICS (TA = +25 °C, VCC = 5.0 V, ZL = ZS = 50 Ω) PART NUMBER PACKAGE OUTLINE SYMBOLS ICC GP fU PO(SAT) NF RLIN RLOUT ISOL PARAMETERS AND CONDITIONS Circuit Current (no signal) Power Gain, f = 500 MHz Upper Limit Operating Frequency (The gain at fU is 3 dB down from the gain at 100 MHz) Maximum Output Level, f = 500 MHz, PIN = 0 dBm Noise Figure, f = 500 MHz Input Return Loss, f = 500 MHz Output Return Loss, f = 500 MHz Isolation, f = 500 MHz UNITS mA dB GHz dBm dB dB dB dB 9 8 20 MIN 12 10 1.6 +2 UPC2791TB S06 TYP 17 12 1.9 +4 5.5 12 11 24 7.0 12 9 24 MAX 22 14 MIN 14 17 1.0 +3 UPC2792TB S06 TYP 19 20 1.2 +5 3.5 15 12 28 6 MAX 24 22 The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Date Published: June 28, 2005 UPC2791TB, UPC2792TB ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS VCC PIN PT TOP TSTG PARAMETERS Supply Voltage Input Power Total Power Dissipation Operating Temperature Storage Temperature 2 UNITS V dBm mW °C °C RATINGS 6 +10 200 -40 to +85 -55 to +150 RECOMMENDED OPERATING CONDITIONS SYMBOL VCC TOP PARAMETER Supply Voltage Operating Temperature UNITS V ˚C MIN 4.5 -40 TYP MAX 5.0 +25 5.5 +85 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on double sided copper clad 50 x 50 x 1.6 mm epoxy glass PWB (TA = +85°C). PIN DESCRIPTION Pin No. Pin Name Applied Voltage (V) Description Internal Equivalent Circuit UPC2791TB 1 2 5 GND 0 Ground pin. This pin should be connected to system ground with minimum inductance. Ground pattern on the board should be formed as wide as possible. All the ground pins must be connected together with wide ground pattern to minimize impedance difference. VCC OUT 3 Output — Signal output pin. An internal matching circuit, configured with resistors, enables 50 Ω connection over a wide bandwidth. This pin must be coupled to the output load with a blocking capacitor. IN GND2 GND1 UPC2792TB 4 VCC 4.5 to 5.5 Power supply pin. This pin should be externally equipped with a bypass capacitor to minimize ground impedance. VCC OUT 6 Input — Signal input pin. An internal matching circuit, configured with resistors, enables 50 Ω connection over a wide bandwidth. A multi-feedback circuit is designed to cancel the deviations of hFE and resistance. This pin must be coupled to the signal source with a blocking capacitor. IN GND2 GND1 UPC2791TB, UPC2792TB OUTLINE DIMENSIONS (Units in mm) PACKAGE OUTLINE S06 2.1±0.1 1.25±0.1 2.0±0.2 0.65 3 1.3 0.65 2 3 4 4 3 PIN CONNECTIONS (Top View) (Bottom View) C2S 4 0.2 +0.1 -0 2 C2C 5 5 2 5 1 6 6 1 1 6 DOT ON BACK SIDE 0.9 ± 0.1 0.7 Marking is an example of UPC2791TB 1. GND 4. VCC 2. GND 5. GND 3. Output 6. Input 0 ~0.1 +0.1 0.15 -0.5 TEST CIRCUIT VCC 1000 pF ORDERING INFORMATION (Solder Contains Lead) PART NUMBER UPC2791TB-E3 UPC2792TB-E3 MARKING C2S C2T QTY 3K/reel 3K/reel C3 4 50 Ω IN 1000 pF C1 6 1, 2, 5 3 1000 pF C2 50 Ω OUT Note: Embossed tape, 8 mm wide. Pins 1, 2, and 3 face perforated side of tape. ORDERING INFORMATION (Pb-Free) PART NUMBER UPC2791TB-E3-A UPC2792TB-E3-A MARKING C2S C2T QTY 3K/reel 3K/reel Note: Embossed tape, 8 mm wide. Pins 1, 2, and 3 face perforated side of tape. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. A Business Partner of NEC Compound Semiconductor Devices, Ltd. 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.