UPC3230GR-E1-A

Preliminary Data Sheet Bipolar Analog Integrated Circuit µPC3230GR AGC AMPLIFIER + PRE AMPLIFIER IC DESCRIPTION The uPC3230GR is silicon bipolar monolithic IC designed for use as Dual path AGC amplifier for digital TV, Digital CATV. This IC consists of Dual path AGC amplifier for QAM path and analog one to B/B block of STB. The package is 16-pin SSOP Package suitable for surface mount. This IC is manufactured using our 30 GHz fmax UHS0 (Ultra High Speed Process) silicon bipolar process. This process uses silicon nitride passivation film. This material can protect chip surface from external pollution and prevent corrosion /migration. Thus, this IC has excellent performance, uniformly and reliability. FEATURES f(in):30~100MHz AGC AMPLIFIERBLOCK ICC :37mA @5.0V Gmax:30dB GCR:40dB IM3:45dBc(min)/53dB(typ)@Output=0.5Vp-p/tone PRE AMPLIFIER BLOCK ICC :61mA @5.0V Gain :28dB(typ) NF :6.6dB(typ) IM3:58dB(typ)@Output=2.5Vp-p/tone Package High-density surface mounting : 16-pin SSOP package APPLICATIONS Digital CATV Cable modem receivers ORDERING INFORMATION (PLAN) Part Number µPC3230GR−E1-A Package 16-pin plastic SSOP (5.72mm(225)) (Pb-Free) Note Supplying Form Embossed tape 12mm wide. Pin 1 indicates pull-out direction of tape. Qty 2.5kpcs/reel. Note With regards to terminal solder (the solder contains lead) plated products (conventionally plated), contact your nearby sales office. Remark To order evaluation samples, please contact your local NEC sales office. Part number for sample order: µPC3230GR 5.2×4.4×1.5mm Document No. PUXXXXEJW1V1DS (2nd edition) Date Published November, 2005 CP(K) µPC3230GR INTERNAL BLOCK DIAGRAM AND PIN CONFIGURATION (Top View) Preliminary Data Sheet µPC3230GR ABSOLUTE MAXIMUM RATINGS Parameter Supply Voltage Power Dissipation Operating Ambient Temperature Storage Temperature Symbol VCC PD TA Tstg Test Condition TA=+25°C TA=+70°C Note Rating 6.0 533 −20 to +70 −55 to+150 Unit V mW °C °C Note Mounted on double-sided copper-clad 50 × 50 ×1.6 mm epoxy glass PWB RECOMMENDED OPERATING RANGE Parameter Supply Voltage Operating Ambient Temperature Gain Control Voltage Range Symbol VCC TA VAGC Vcc = 4.5 to 5.5 V Test Condition MIN. 4.5 −20 0 TYP. 5.0 +25 − MAX. 5.5 +70 Vcc Unit V °C V Preliminary Data Sheet µPC3230GR ELECTRICAL CHARACTERISTICS (TA=+25°C, VCC = 5V, f = 45MHz, Zin = 50 Ω, Zout (11pin)= 290 Ω, Zout (6,7pin)= 560 Ω) Parameter Input Frequency Range Mode Switch voltage range Symbol f(in) VSW 1 VSW 2 fc =-3dB Digital (QAM) Mode Analog (Video) Mode Test Conditions Note 1 MIN. 30 0 3 TYP. − − − MAX. 100 1 Vcc Unit MHz V V Digital (QAM) Mode V SW=1.0V ZL1=560 Ω Circuit Current Maximum Voltage Gain Gain Control Range (input prescribe) 3rd Order Inter-modulation Distortion IM31 f1 = 44 MHz, f2 = 45 MHz, Vin= +30 dBmV/tone, Vout=0.5VP-P /tone Noise Figure Output Voltage Output Voltage AGC Voltage High Level Analog (Video) Mode Circuit Current Pre Amp Voltage Gain Pre Amp Noise Figure 3rd Order Inter-modulation Distortion NF1 Vout1 Vout2 VAGC(H) VAGC= 2.5 V f=45MHz f=45MHz , 6pin f=45MHz , 7pin @ Maximum gain Note 1 Note 2 Note 1 Note 1 Note 1 2.5 6.0 1.0 1.0 − Vcc dB VP-P VP-P V 45 53 dBc Icc1 GMAX GCRin no input signal VAGC=2.5V,Dual-IN:Vou=+18dBmV VAGC=0 to 2.5 V Note 1 Note 1 Note 1 − 27 35 37 30 40 48 33 mA dB dB V SW=3.0V ZL2=290 Ω Icc2 GV NF2 IM32 no input signal VAGC=2.5V,Dual-IN:Vou=+18dBmV VAGC= 2.5 V, f=45MHz f1 = 44 MHz, f2 = 45 MHz, Pin= −22 dBm/tone, Vout=2.5VP-P /tone Note 1 Note 1 1.3 2.0 2.5 VP-P Note 1 Note 1 Note 2 − 25 44 61 28 6.6 58 79 31 mA dB dB dBc Output Voltage Notes 1. By measurement circuit 1 2. By measurement circuit 2 Vout3 Dual-IN:Vou=+27dBmV, 11pin Preliminary Data Sheet µPC3230GR MEASUREMENT CIRCUIT 1 Note Balun Transformer : TOKO 617DB-1714 B4F (Double balanced type) Preliminary Data Sheet µPC3230GR MEASUREMENT CIRCUIT 2 Note Balun Transformer : TOKO 617DB-1714 B4F (Double balanced type) Preliminary Data Sheet µPC3230GR PACKAGE DIMENSIONS 16 PIN PLASTIC SSOP (5.72mm(225)) (Unit : mm) Preliminary Data Sheet µPC3230GR Preliminary Data Sheet 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.