UPG183GR-E1-A

GaAs MMIC DBS 4X2 IF SWITCH UPG183GR FEATURES • FOUR INDEPENDENT IF CHANNELS • INTEGRAL SWITCHING TO CHANNEL INPUT TO EITHER CHANNEL OUTPUT • INSERTION LOSS PER CHANNEL: 7 dB TYP (ZO = 50 Ω) • FREQUENCY RANGE: 950 MHz to 2150 MHz • CHANNEL TO CHANNEL ISOLATION: 26.5 dB TYP • SMALL 16 PIN HTSSOP PACKAGE 9 0.65±0.1 0.20±0.10 5.5±0.3 OUTLINE DIMENSIONS (Units in mm) 16 pin HTSSOP 6.4±0.3 8 0.20±0.10 16 5.2±0.2 N 1 0.9±0.2 0.4 0.5 1.8 DESCRIPTION NEC's UPG183GR is intended for use in Direct Broadcast Satellite (DBS) applications within the Low Noise Block (LNB) down converter, for systems where at least two LNB outputs are required. It offers four intermediate frequency amplifier channels that can independently select 1 of 4 IF inputs. It is housed in a very small 16 pin plastic HTSSOP package, available on tapeand-reel, easy to install and contributes to miniaturizing the systems. 2.7 0.1 2.5 1.5 ELECTRICAL CHARACTERISTICS (TA = +25°C, unless otherwise specified, VCONT1 to VCONT8 = 0/+5 V, PIN = 0 dBm, ZO = 50 Ω, Each Port) PART NUMBER PACKAGE OUTLINE SYMBOLS LINS 1 LINS 2 ∆LINS ISOL 1 ISOL 2 RL(OUT) ICONT PARAMETERS AND CONDITIONS Insertion Loss 1, f = 0.95 GHz to 1.5 GHz Insertion Loss 2, f = 1.5 GHz to 2.15 GHz Insertion Loss Flatness, | LINS (0.95 GHz)—LINS (2.15 GHz)| Channel Isolation 1, f = 0.95 GHz to 1.5 GHz Channel Isolation 2, f = 1.5 GHz to 2.15 GHz Output Return Loss, f = 0.95 GHz to 2.15 GHz Control Current , VCONT = +5 V/0 V, RFoff 1 UPG183GR 16 pin HTSSOP UNITS dB dB dB dB dB dB mA MIN — — — 24 22 10 — TYP 7.0 8.0 1.5 26.5 23.5 14 — MAX 9.0 10.0 3.0 — — — 0.5 Notes: 1. Per one control pin. California Eastern Laboratories UPG183GR ABSOLUTE MAXIMUM RATINGS1 (TA = +25°C) SYMBOLS VCONT1-8 PTOT PIN TA TSTG PARAMETERS Control Voltage 1-8 Total Power Input Power Operating Ambient Temp. Storage Temperature Dissipation2 UNITS V W dBm °C °C RATINGS -1.0 to +6.0 2 + 10 -40 to +85 -65 to +150 RECOMMENDED OPERATING CONDITIONS (TA = +25°C) SYMBOLS VCONT(H) VCONT(L) PARAMETERS Control Voltage (High) Control Voltage (Low) UNITS MIN TYP MAX V V +4.5 -0.5 +5 0 +5.5 +0.5 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on a 50x50x1.6 mm double copper clad epoxy glass PWB, TA = +85°C. EVALUATION CIRCUIT (VCONT1 to VCONT8 = 0/+5 V, PIN = 0d Bm, ZO = 50 Ω, DC Blocking Capacitor = 51 pF) VCOUNT1, VCOUNT2, VCOUNT3, VCOUNT4, 51pF IN-A 51pF 1000 pF 50 Ω 51 pF IN-B 16 OUT1 9 1 ZO=50 Ω 8 51 pF ZO=50 Ω 50 Ω 1000 pF OUT2 IN-C 51pF IN-D 51pF VCOUNT5, VCOUNT6, VCOUNT7, VCOUNT8 CHANNEL SELECT TRUTH TABLE ON CHANNEL OUT1 IN-A IN-B IN-C IN-D – – – – OUT2 – – – – IN-A IN-B IN-C IN-D VCONT1 High High Low Low – – – – VCONT2 Low Low High High – – – – VCONT3 High Low High Low – – – – CONTROL PIN VCONT4 Low High Low High – – – – VCONT5 – – – – High High Low Low VCONT6 – – – – Low Low High High VCONT7 – – – – High Low High Low VCONT8 – – – – Low High Low High UPG183GR PIN CONNECTION AND INTERNAL BLOCK DIAGRAM PIN NO. 1 2 3 4 5 6 7 8 CONNECTION IN-C GND IN-D VCONT5 VCONT6 VCONT7 VCONT8 OUT2 PIN NO. 9 10 11 12 13 14 15 16 CONNECTION OUT1 VCONT4 VCONT3 VCONT2 VCONT1 IN-A GND IN-B TOP VIEW 16 15 14 13 12 11 10 9 SW SW 1 2 3 4 5 6 7 8 ORDERING INFORMATION PART NUMBER UPG183GR-E1-A PACKAGE 16-pin Plastic HTSSOP QUANTITY Qty. 3k pcs/Reel Notes: 1. Carrier tape, 12 mm wide. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM DATA SUBJECT TO CHANGE WITHOUT NOTICE 02/01/2001 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 ; Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability. 5-226