UPG2008TK

PRELIMINARY DATA SHEET NEC's L,S BAND ULTRA SMALL SPDT GaAs MMIC SWITCH UPG2008TK FEATURES • ULTRA SMALL 6 PIN RECESSED LEAD MINI-MOLD PACKAGE: Size: 1.5 x 1.1 x 0.55 mm • LOW INSERTION LOSS: LINS = 0.40 dB TYP at f = 1 GHz LINS = 0.60 dB TYP at f = 2.5 GHz 0.48±0.05 0.48±0.05 OUTLINE DIMENSIONS (Units in mm) PACKAGE OUTLINE TK • HIGH ISOLATION: ISOL = 25 dB TYP at f = 2.5 GHz DESCRIPTION NEC's UPG2008TK is a Single Pole Double Throw (SPDT)GaAs MMIC switch, developed for applications in the 0.5 to 2.5 GHz frequency range. This device is housed in NEC's ultra small "TK" plastic surface mount package. This 6 pin recessed lead mini mold package has a footprint that is over 50% smaller than conventional small size SOT-363 package types. Package height is also reduced by 39% by incorporating a flat lead style. These tremendous size reductions make this switch an ideal device for small size portable applications and modules. NEC's stringent quality assurance and test procedures assure the highest performance. consistency and reliability. APPLICATION • L, S band digital cellular or cordless handsets • PCS, Bluetooth, WLAN, and WLL applications ELECTRICAL CHARACTERISTICS (Unless Otherwise Specified, TA = 25°C, VCONT1 = 2.8 V and VCONT2 = 0 V or VCONT1 = 0V and VCONT2 = 2.8 V, ZO = 50Ω, off chip DC blocking capacitor value, 51pF) PART NUMBER PACKAGE OUTLINE SYMBOLS LINS PARAMETERS AND CONDITIONS Insertion Loss f = 0.5 to 1.0 GHz f = 1.0 to 2.0 GHz f = 2.0 to 2.5 GHz f = 0.5 to 2.5 GHz f = 0.5 to 2.5 GHz f = 0.5 to 2.5 GHz f = 1.0 GHz1 f = 1.0 GHz1 UNITS dB dB dB dB dB dB dBm dBm ns µA 20 22 13 13 MIN UPG2008TK TK TYP 0.40 0.50 0.60 25 20 20 20 25 50 0.5 10 MAX 0.70 0.80 0.85 ISOL RLIN RLOUT PIN(0.1dB) PIN(1dB) tsw ICONT Isolation Input Return Loss Output Return Loss Input Power at 0.1 dB Compression Input Power at 1 dB Compression Switching Speed Control Current, at VCONT = 2.8 V/0 V, no RF signal Note: 1. PIN(0.1dB) or PIN(1dB) measured the input power level when the insertion loss increases to more than that of the linear range. All other characterisitics are measured in the the linear range. California Eastern Laboratories UPG2008TK ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS VCONT PIN PT TOP TSTG PARAMETERS Control Voltage Input Power Total Power Dissipation Operating Temperature Storage Temperature UNITS V dBm W °C °C RATINGS -6.0 to +6.02 28 0.15 -45 to +85 -55 to +150 RECOMMENDED OPERATING CONDITIONS (TA = 25°C) SYMBOLS VCONT(H) VCONT(L) PARAMETERS Control Voltage High Control Voltage Low UNITS MIN V V +2.5 -0.2 TYP MAX +3.0 0 +5.3 +0.2 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. | VCONT1 – VCONT2 | ≤ 6.0 V EVALUATION BOARD VC1 6P L2MM SW T.F. for J- Contacts Ver. 1 OUT1 TEST CIRCUIT1 C1 1 2 6 C2 VCONT1 C1 IN VCONT2 C2 C2 C2 C1 OUT1 G2R 5 4 OUT2 C1 3 C1 Note: 1. VCONT1 = 2.8 V, VCONT2 = 0V or VCONT2 = 0 V, VCONT1 = 2.8V, off chip DC blocking capacitors value C1=51pF, C2 = 1000pF (Bypass), Using NEC standard evaluation board. IN C1 PIN CONNECTIONS & INTERNAL BLOCK DIAGRAM PIN CONNECTION DIAGRAM PIN NO. 1 2 3 4 5 6 CONNECTION OUT1 GND OUT2 VCONT2 IN VCONT1 OUT2 VC2 TRUTH TABLE OF SWITCHING BY CONDITION OF VOLTAGE VCONT1 LOW HIGH VCONT2 HIGH LOW IN-OUT1 ON OFF IN-OUT2 OFF ON (Top View) (Bottom View) 6 5 4 6 5 4 1 2 3 ORDERING INFORMATION PART NUMBER UPG2008TK-E2 MARKING G2R QTY 5 kpcs Per Reel G2R 1 2 3 Note: 1. Embossed tape, 8 mm wide, Pins 1,2,3 face perforation side. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 08/30/2004 A Business Partner of NEC Compound Semiconductor Devices, Ltd.