UPG2106TB-E3-A

PRELIMINARY DATA SHEET L-BAND PA DRIVER AMPLIFIER UPG2106TB FEATURES • LOW VOLTAGE OPERATION: VDD1 = VDD2 = 3.0 V, fRF = 889 to 960 MHz @ POUT = +8 dBm • LOW DISTORTION: PADJ1 = 60 dBc TYP @ VDD = 3.0 V, POUT = +8 dBm, VAGC = 2.5 V • LOW CURRENT OPERATION : IDD = 25 mA TYP @ VDD = 3.0 V, POUT = +8 dBm, VAGC = 2.5 V • EXTERNAL INPUT AND OUTPUT MATCHING • VARIABLE GAIN CONTROL FUNCTION : G = 40 dB TYP @ VAGC = 0.5 to 2.5 V • 6 PIN SUPER MINI-MOLD PACKAGE 1 6 DOT ON BOTTOM SIDE OUTLINE DIMENSIONS (Units in mm) PACKAGE OUTLINE S06 2.1–0.1 1.25–0.1 2.0–0.2 0.65 3 1.3 0.65 2 4 0.2 +0.1 -0 5 DESCRIPTION NEC's UPG2106TB is a GaAs MMIC for PA driver amplifiers with variable gain functions which was developed for L-band applications. The device can operate with 3.0 V, having high gain and low distortion. 0.9 – 0.1 0.7 0 ~0.1 +0.1 0.15 -0.5 APPLICATION • CELLULAR HANDSETS AND OTHER PORTABLE DEVICES ELECTRICAL CHARACTERISTICS (TA = 25 °C,VDD1 = VDD2 = +3.0 V, π/4DQPSK modulated input signal, external input and output matching, unless otherwise specified) PART NUMBER PACKAGE OUTLINE SYMBOLS f IDD IAGC GP G PADJ1 PADJ2 PARAMETERS AND CONDITIONS Operating Frequency Total Current AGC Control Current Power Gain Variable Gain Range Adjacent Channel Power Leakage 1 Adjacent Channel Power Leakage 2 POUT = +8 dBm, VAGC = 2.5 V VAGC = 0.5 to 2.5 V PIN = -18 dBm, VAGC = 2.5 V PIN = -18 dBm, VAGC = 0.5 to 2.5 V POUT= +8 dBm, VAGC = 2.5 V, ∆f = ± 50 KHz, 21 kHz Bandwidth POUT= +8 dBm, VAGC = 2.5 V, ∆f = ± 100 KHz, 21 kHz Bandwidth UNITS MHz mA µA dB dB dBc dBc MIN 889 25 200 30 40 -60 -70 UPG2106TB S06 TYP MAX 960 35 500 26 35 -55 -65 California Eastern Laboratories UPG2106TB ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS VDD VAGC PIN PT TOP TSTG PARAMETERS Supply Voltage AGC Control Voltage Input Power Total Power Dissipation2 Operating Temperature Storage Temperature UNITS V V dBm mW °C °C RATINGS 6.0 6.0 -8 140 -30 to +90 -35 to +150 RECOMMENDED OPERATING CONDITIONS (TA = 25°C) SYMBOLS VDD PIN VAGC PARAMETERS Supply Voltage Input Power AGC Control Voltage UNITS MIN V dBm V 0 +2.7 TYP MAX +3.0 -18 +3.3 -10 2.5 Notes: 1. Operation excess of any one of these parameters may result in permanent damage. 2. Mounted on a 50 x 50 x 1.6mm double copper clad epoxy glass PWB, TA = +85 °C TEST CIRCUIT1 C6 VDD1 VDD2 C8 PIN NO. C1, C6, C7, C8 CONNECTION 1000 pF 27 pF 8.2 pF 100 pF 18 nH 22 nH 10 nH 1 kΩ C7 L4 C5 L3 C4 OUT C2 C3 C4, C5 L1, L4 L2 L3 R1 1 2 3 G1V 6 L1 IN L2 C2 C3 5 4 R1 VAGC C1 Note: 1. VDD1 = VDD2 = +3.0 V, f = 925 MHz. PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM (Top View) 3 4 4 (Bottom View) 3 3 (Top View) 4 ORDERING INFORMATION PART NUMBER UPG2106TB-E3-A Note: 1. Embossed tape, 8 mm wide. QTY 3 kpcs Per Reel G1V 2 5 5 2 2 5 1 6 6 1 1 6 1. VDD1 2. GND 3. VDD2 & Output 4. VAGC 5. GND 6. Input Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM DATA SUBJECT TO CHANGE WITHOUT NOTICE 07/05/2000 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability. 4-276