UPG2181T5R-E2

PRELIMINARY PRODUCT INFORMATION GaAs INTEGRATED CIRCUIT uPG2181T5R HIGH POWER DP4T SWITCH FOR WiMAX DESCRIPTION The uPG2181T5R is a GaAs MMIC high power DP4T switch which was developed for WiMAX. This device can operate from 2.3GHz to 3.8GHz, with low insertion loss and high isolation. This device is housed in a 20-pin RQFN Rectangle Quad Flat Non-Leaded package, and this is suitable for high-density surface mounting. FEATURES Supply Voltage Control Voltage Low Insertion Loss High Isolation Power Handling High-density surface mounting : VDD = 2.8 to 3.2V 3.0V TYP. : Vcont H = 1.5 to VDD VDD TYP. : Vcont L = 0 to 0.2V 0V TYP. : Lins1 = 0.8dB TYP. @ f = 2.3 to 2.7GHz, VDD = 3.0V, Vcont H = 3.0V, Vcont L = 0V : Lins2 = 1.0dB TYP. @ f = 3.3 to 3.8GHz, VDD = 3.0V, Vcont H = 3.0V, Vcont L = 0V : ISL1 = 28dB TYP.@ f = 2.3 to 2.7GHz, TX to RX, VDD = 3.0V, Vcont H = 3.0V, Vcont L = 0V : ISL2 = 24dB TYP.@ f = 3.3 to 3.8GHz, TX to RX, VDD = 3.0V, Vcont H = 3.0V, Vcont L = 0V : ISL3 = 25dB TYP.@ f = 2.3 to 2.7GHz, TX to ANT, VDD = 3.0V, Vcont H = 3.0V, Vcont L = 0V : ISL4 = 21dB TYP.@ f = 3.3 to 3.8GHz, TX to ANT, VDD = 3.0V, Vcont H = 3.0V, Vcont L = 0V : ISL5 = 25dB TYP.@ f = 2.3 to 2.7GHz, RX to ANT, VDD = 3.0V, Vcont H = 3.0V, Vcont L = 0V : ISL6 = 22dB TYP.@ f = 3.3 to 3.8GHz, RX to ANT, VDD = 3.0V, Vcont H = 3.0V, Vcont L = 0V : Pin 1dB = +40.0dBm TYP.@ f = 2.5/3.5GHz, TX to ANT, VDD = 3.0V, Vcont H = 3.0V, Vcont L = 0V : Pin 1dB = +35.0dBm TYP.@ f = 2.5/3.5GHz, RX to ANT, VDD = 3.0V, Vcont H = 3.0V, Vcont L = 0V : 20-pin RQFN package 2.5 3.5 0.6 mm APPLICATION Antenna Switch for WiMAX CPE (Customer Premises Equipment) ORDERING INFORMATION Part Number uPG2181T5R – E2 Order Number uPG2181T5R – E2 A Package 20-pin plastic RQFN Pb-Free Marking 2181 Supplying Form Embossed tape 8 mm wide Pin1,6 face the perforation side of the tape Qty 3 kpcs/reel Remark To order evaluation samples, contact your nearby sales office. Part number for sample order : uPG2181T5R-A Caution Electro-static sensitive devices The information in this document is being issued in advance of the production cycle for device. The parameters for the device may change before final production or NEC Compound Semiconductor Devices, at its own discretion, may withdraw the device prior to its production. Document No. PG*****EJW2V0PM ( 4th edition ) Date Published July 2007 C NEC Electronics Corporation 2007 uPG2181T5R PIN CONNECTIONS Pin NO. 1 2 10 9 8 7 65 4 3 2 1 17 18 19 20 3 4 5 6 7 8 9 10 Rx GND ANT4 GND ANT3 GND GND ANT2 13 14 15 16 17 18 19 20 GND Tx GND GND VDD Vcont2 Vcont1 Vcont0 Pin Name GND GND Pin No. 11 12 Pin Name GND ANT1 Top View 16 15 14 13 12 11 17 18 19 20 1 2 3 4 5 6 10 Bottom View 11 12 13 14 15 16 2181 9 8 7 Exposed pad : GND TRUTH TABLE CONTROL VOLTAGE Tx VDD High High High High High High High High Vcont0 Low High Low High Low High Low High Vcont1 Low Low High High Low Low High High Vcont2 Low Low Low Low High High High High ANT1 ON OFF OFF OFF OFF OFF OFF OFF ANT2 OFF ON OFF OFF OFF OFF OFF OFF ANT3 OFF OFF ON OFF OFF OFF OFF OFF ANT4 OFF OFF OFF ON OFF OFF OFF OFF ANT1 OFF OFF OFF OFF ON OFF OFF OFF ANT2 OFF OFF OFF OFF OFF ON OFF OFF ON PATH Rx ANT3 OFF OFF OFF OFF OFF OFF ON OFF ANT4 OFF OFF OFF OFF OFF OFF OFF ON 2 Preliminary Product Information uPG2181T5R ABSOLUTE MAXIMUM RATINGS (TA = +25 Parameter Supply Voltage Switch Control Voltage Input Power-Tx (ON Port) Input Power-Rx (ON Port) Input Power-Tx (OFF Port) Input Power-Rx (OFF Port) Power Dissipation Operating Ambient Temperature Storage Temperature Symbol VDD Vcont Pin-Tx Pin-Rx Pin-Tx (OFF) Pin-Rx (OFF) PD TA Tstg nless otherwise specified) Ratings 4.2 4.2 +41 +36 +25 +25 800 -45 to +85 -55 to +150 Unit V V dBm dBm dBm dBm mW RECOMMENDED OPERATING RANGE (TA = +25 Parameter Operating Frequency Symbol fopt1 fopt2 Supply Voltage Switch Control Voltage H Switch Control Voltage L VDD Vcont Vcont H L nless otherwise specified) TYP. 3.0 VDD 0 MAX. 2.7 3.8 3.2 VDD 0.2 Unit GHz GHz V V V MIN. 2.3 3.3 2.8 1.5 0 Preliminary Product Information 3 uPG2181T5R ELECTRICAL CHARACTERISTICS (TA = +25 , Vcont (H) = 3.0V, Vcont (L) = 0V, DC blocking capacitor = 6pF, Z0 = 50 , unless otherwise specified) Parameter Insertion Loss1 Insertion Loss2 Insertion Loss3 Insertion Loss4 Isolation1 Isolation2 Isolation3 Isolation4 Isolation5 Isolation6 On Port Return Loss1 On Port Return Loss2 Unused Port Return Loss1 Unused Port Return Loss2 1dB Loss Compression Input PowerNote Symbol Lins1 Lins2 Lins3 Lins4 ISL1 ISL2 ISL3 ISL4 ISL5 ISL6 RLin1 RLin2 URLin1 URLin2 Pin 1dB Conditions f = 2.3 to 2.7GHz, Tx to ANT1/2/3/4 f = 3.3 to 3.8GHz, Tx to ANT1/2/3/4 f = 2.3 to 2.7GHz, Rx to ANT1/2/3/4 f = 3.3 to 3.8GHz, Rx to ANT1/2/3/4 f = 2.3 to 2.7GHz, Tx to Rx f = 3.3 to 3.8GHz, Tx to Rx f = 2.3 to 2.7GHz, Tx to ANT1/2/3/4 f = 3.3 to 3.8GHz, Tx to ANT1/2/3/4 f = 2.3 to 2.7GHz, Rx to ANT1/2/3/4 f = 3.3 to 3.8GHz, Rx to ANT1/2/3/4 f = 2.3 to 2.7GHz, All port f = 3.3 to 3.8GHz, All port f = 2.3 to 2.7GHz, Tx / Rx port f = 3.3 to 3.8GHz, Tx / Rx port f = 2.5GHz, Tx to ANT1/2/3/4 f = 3.5GHz, Tx to ANT1/2/3/4 f = 2.5GHz, Rx to ANT1/2/3/4 f = 3.5GHz, Rx to ANT1/2/3/4 MIN. 25 21 22 18 22 19 - TYP. 0.80 1.00 0.80 1.00 28 24 25 21 25 22 15 15 13 13 +40.0 +40.0 +35.0 +35.0 +63.0 +57.0 600 1 250 MAX. 1.05 1.30 1.05 1.30 1100 2 dB dB dB dB dB dB dB dB dB dB dB dB dB dB dBm dBm dBm dBm dBm dBm uA uA ns 3rd Order Output Intercept Point Supply Current Switch Control Current Switch Control Speed Note. Pin 1dB OIP3 1 OIP3 2 IDD Icont tSW f = 2.5GHz, Tx to ANT1/2/3/4 f = 2.5GHz, Rx to ANT1/2/3/4 RF None RF None 50% CTL to 90/10% RF is measured the input power level when the insertion loss increases more 1dB than that of linear range. 4 Preliminary Product Information uPG2181T5R EVALUATION CIRCUIT VDD Tx ANT1 6pF 1000pF 17 18 Vcont2 1000pF 19 Vcont1 1000pF 20 16 15 14 13 12 6pF 11 10 9 8 ANT3 7 6pF ANT2 1 2 6pF 3 4 5 6 6pF 6pF 1000pF Vcont0 Rx ANT4 The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. Preliminary Product Information 5 uPG2181T5R MOUNTING PAD DIMENSIONS 20-PIN PLASTIC RQFN UNIT: mm MOUNTING PAD Remark The mounting pad layouts in this document are for reference only. 6 Preliminary Product Information uPG2181T5R PACKAGE DIMENSIONS 20-PIN PLASTIC RQFN UNIT: mm 6 Preliminary Product Information uPG2181T5R Preliminary Product Information 7 uPG2181T5R July, 2007. 8 Preliminary Product Information 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.