CMJH150

CMJ0130 THRU CMJH180 SURFACE MOUNT SILICON CURRENT LIMITING DIODE w w w. c e n t r a l s e m i . c o m DESCRIPTION: The CENTRAL SEMICONDUCTOR CMJ0130 series types are silicon field effect current regulator diodes designed for applications requiring a constant current over a wide voltage range. These devices are manufactured in the epoxy molded, low profile SOD-123FL case. Special selections of IP (regulator current) are available for critical applications. MARKING: SEE MARKING CODES ON ELECTRICAL CHARACTERISTICS TABLE SOD-123FL CASE FEATURES: • High Reliability • Special Selections Available • Superior Lot to Lot Consistency • Leaded Devices Available SYMBOL POV POV PD TJ, Tstg ΘJA 100 50 500 -65 to +150 250 UNITS V V mW °C °C/W MAXIMUM RATINGS: (TA=25°C) Peak Operating Voltage (CMJ0130 THRU CMJ5750) Peak Operating Voltage (CMJH080 THRU CMJH180) Power Dissipation Operating and Storage Junction Temperature Thermal Resistance ELECTRICAL CHARACTERISTICS: (TA=25°C unless otherwise noted) Regulator Current (Note 1) Type IP @ VT=25V ZT @ VT=25V ZK @ VK=6.0V VL @ IL=0.8 x IP MIN TC Minimum Dynamic Impedance Minimum Knee Impedance Maximum Limiting Voltage Temperature Coefficient (Note 2) Marking Code MIN mA CMJ0130 CMJ0300 CMJ0500 CMJ0750 CMJ1000 CMJ1500 CMJ2000 CMJ2700 CMJ3500 CMJ4500 CMJ5750 CMJH080 CMJH100 CMJH120 CMJH150 0.05 0.20 0.40 0.60 0.88 1.28 1.68 2.28 3.0 3.9 5.0 6.56 8.0 9.6 12 NOM mA 0.13 0.31 0.515 0.76 1.1 1.5 2.0 2.69 3.55 4.5 5.75 8.2 10 12 15 MAX mA 0.21 0.42 0.63 0.92 1.32 1.72 2.32 3.1 4.1 5.1 6.5 9.84 12 14.4 18 MΩ 6.0 4.0 2.0 1.0 0.65 0.45 0.35 0.30 0.25 0.20 0.05 0.32 0.17 0.08 0.03 kΩ 2,000 1,000 500 200 100 70 50 30 20 10 5.0 15 6.0 3.0 2.0 V 0.6 0.8 1.1 1.4 1.7 2.0 2.3 2.7 3.2 3.7 4.5 3.1 3.5 3.8 4.3 4.6 %/°C +2.10 to +0.10 +0.40 to -0.20 +0.15 to -0.25 0.0 to -0.32 -0.10 to -0.37 -0.13 to -0.40 -0.15 to -0.42 -0.18 to -0.45 -0.20 to -0.47 -0.22 to -0.50 -0.25 to -0.53 -0.25 to -0.45 -0.25 to -0.45 -0.25 to -0.45 -0.25 to -0.45 -0.25 to -0.45 101 301 501 701 102 152 202 272 352 452 562 822 103 123 153 183 CMJH180 16 18 20 0.02 1.8 Notes: 1) Pulsed Method: Pulse Width (ms) = 27.5 divided by IP NOM (mA) 2) The Temperature Coefficient is measured between + 25°C and +50°C. R2 (5-October 2010) CMJ0130 THRU CMJH180 SURFACE MOUNT SILICON CURRENT LIMITING DIODE SOD-123FL CASE - MECHANICAL OUTLINE LEAD CODE: 1) Cathode 2) Anode MARKING: SEE ELECTRICAL CHARACTERISTICS TABLE R2 (5-October 2010) w w w. c e n t r a l s e m i . c o m CMJ0130 THRU CMJH180 SURFACE MOUNT SILICON CURRENT LIMITING DIODE TYPICAL ELECTRICAL CHARACTERISTICS Regulator Current vs Voltage R2 (5-October 2010) w w w. c e n t r a l s e m i . c o m