CEM2401

P-Channel Enhancement Mode Field Effect Transistor FEATURES -20V, -6A, RDS(ON) = 44mΩ @VGS = -4.5V. RDS(ON) = 65mΩ @VGS = -2.5V. Super high dense cell design for extremely low RDS(ON). High power and current handing capability. Lead free product is acquired. Surface mount Package. D 8 CEM2401 D 7 D 6 D 5 SO-8 1 1 S 2 S 3 S 4 G ABSOLUTE MAXIMUM RATINGS Parameter Drain-Source Voltage Gate-Source Voltage Drain Current-Continuous Drain Current-Pulsed a TA = 25 C unless otherwise noted Symbol VDS VGS ID IDM PD TJ,Tstg Limit -20 Units V V A A W C ±12 -6 -20 2.5 -55 to 150 Maximum Power Dissipation Operating and Store Temperature Range Thermal Characteristics Parameter Thermal Resistance, Junction-to-Ambient b Symbol RθJA Limit 50 Units C/W Details are subject to change without notice . 1 Rev 3. 2010.Mar http://www.cetsemi.com CEM2401 P-Channel Electrical Characteristics Parameter Off Characteristics Drain-Source Breakdown Voltage Zero Gate Voltage Drain Current Gate Body Leakage Current, Forward Gate Body Leakage Current, Reverse On Characteristics c Gate Threshold Voltage Static Drain-Source On-Resistance Dynamic Characteristics d Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Switching Characteristics d Turn-On Delay Time Turn-On Rise Time Turn-Off Delay Time Turn-Off Fall Time Total Gate Charge Gate-Source Charge Gate-Drain Charge Drain-Source Diode Forward Current b Drain-Source Diode Forward Voltage c td(on) tr td(off) tf Qg Qgs Qgd IS VSD VGS = 0V, IS = -1.0A VDS = -10V, ID = -4A, VGS = -4.5V VDD = -10V, ID = -4A, VGS = -4.5V, RGEN = 3Ω 15 10 40 13 13 2.5 3 -2.5 -1.0 30 20 80 26 17 ns ns ns ns nC nC nC A V gFS Ciss Coss Crss VGS(th) RDS(on) VGS = VDS, ID = -250µA VGS = -4.5V, ID = -4A VGS = -2.5V, ID = -3.2A VDS = -5.0V, ID = -4A VDS = -10V, VGS = 0V, f = 1.0 MHz -0.5 35 50 10 965 200 155 -1 44 65 V mΩ mΩ S pF pF pF BVDSS IDSS IGSSF IGSSR VGS = 0V, ID = -250µA VDS = -20V, VGS = 0V VGS = 12V, VDS = 0V VGS = -12V, VDS = 0V -20 -1 100 -100 V µA TA = 25 C unless otherwise noted Test Condition Min Typ Max Units Symbol nA nA Drain-Source Diode Characteristics and Maximun Ratings Notes : a.Repetitive Rating : Pulse width limited by maximum junction temperature. b.Surface Mounted on FR4 Board, t < 10 sec. c.Pulse Test : Pulse Width < 300µs, Duty Cycle < 2%. d.Guaranteed by design, not subject to production testing. 2 CEM2401 15 -VGS=4.5,-4.0,-3.5V 10 -ID, Drain Current (A) -ID, Drain Current (A) 12 9 -VGS=2.5V 25 C 8 6 4 TJ=125 C 2 -55 C 0 -VGS=2V 6 3 0 0 0.5 1 1.5 2 2.5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -VDS, Drain-to-Source Voltage (V) Figure 1. Output Characteristics 1500 1250 1000 750 500 250 0 Crss 0 5 10 15 20 25 30 Coss Ciss 2.2 1.9 1.6 1.3 1.0 0.7 0.4 -100 -VGS, Gate-to-Source Voltage (V) Figure 2. Transfer Characteristics ID=-4A VGS=-4.5V RDS(ON), Normalized RDS(ON), On-Resistance(Ohms) C, Capacitance (pF) -50 0 50 100 150 200 -VDS, Drain-to-Source Voltage (V) Figure 3. Capacitance 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 -50 VDS=VGS TJ, Junction Temperature( C) Figure 4. On-Resistance Variation with Temperature -IS, Source-drain current (A) VGS=0V VTH, Normalized Gate-Source Threshold Voltage ID=-250µA 10 1 10 0 -25 0 25 50 75 100 125 150 10 -1 0.4 0.6 0.8 1.0 1.2 1.4 TJ, Junction Temperature( C) Figure 5. Gate Threshold Variation with Temperature -VSD, Body Diode Forward Voltage (V) Figure 6. Body Diode Forward Voltage Variation with Source Current 3 CEM2401 -VGS, Gate to Source Voltage (V) 5 V =-10V DS ID=-4A 10 2 -ID, Drain Current (A) 4 3 2 1 0 RDS(ON)Limit 10 1 10ms 100ms 1s 10 0 DC 10 -1 0 3 6 9 12 15 10 -2 TA=25 C TJ=150 C Single Pulse 10 -2 10 -1 10 0 10 1 10 2 Qg, Total Gate Charge (nC) Figure 7. Gate Charge VDD t on V IN VGS RGEN G RL D VOUT td(on) VOUT -VDS, Drain-Source Voltage (V) Figure 8. Maximum Safe Operating Area toff tr 90% td(off) 90% 10% tf 10% INVERTED 90% S VIN 50% 10% 50% PULSE WIDTH Figure 9. Switching Test Circuit Figure 10. Switching Waveforms 10 0 r(t),Normalized Effective Transient Thermal Impedance D=0.5 0.2 0.1 0.05 0.02 0.01 PDM t1 t2 10 -1 10 -2 Single Pulse 10 -3 1. RθJA (t)=r (t) * RθJA 2. RθJA=See Datasheet 3. TJM-TA = P* RθJA (t) 4. Duty Cycle, D=t1/t2 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 Square Wave Pulse Duration (sec) Figure 11. Normalized Thermal Transient Impedance Curve 4