CEM3120

CEM3120 N-Channel Enhancement Mode Field Effect Transistor FEATURES 30V, 10A, RDS(ON) = 15mΩ @VGS = 10V. RDS(ON) = 22mΩ @VGS = 4.5V. Super high dense cell design for extremely low RDS(ON). High power and current handing capability. D D 7 D 6 D 5 5 Lead free product is acquired. Surface mount Package. 8 SO-8 1 1 S 2 S 3 S 4 G ABSOLUTE MAXIMUM RATINGS Parameter Drain-Source Voltage Gate-Source Voltage Drain Current-Continuous Drain Current-Pulsed a TA = 25 C unless otherwise noted Symbol VDS VGS ID IDM PD TJ,Tstg Limit 30 Units V V A A W C ±20 10 40 2.5 -55 to 150 Maximum Power Dissipation Operating and Store Temperature Range Thermal Characteristics Parameter Thermal Resistance, Junction-to-Ambient b Symbol RθJA Limit 50 Units C/W Details are subject to change without notice . 1 Rev 1. 2006.Sep http://www.cetsemi.com CEM3120 Electrical Characteristics Parameter Off Characteristics Drain-Source Breakdown Voltage Zero Gate Voltage Drain Current Gate Body Leakage Current, Forward Gate Body Leakage Current, Reverse On Characteristics c Gate Threshold Voltage Static Drain-Source On-Resistance Dynamic Characteristics d Input Capacitance Output Capacitance Reverse Transfer Capacitance Switching Characteristics d Turn-On Delay Time Turn-On Rise Time Turn-Off Delay Time Turn-Off Fall Time Total Gate Charge Gate-Source Charge Gate-Drain Charge Drain-Source Diode Forward Current b Drain-Source Diode Forward Voltage c td(on) tr td(off) tf Qg Qgs Qgd IS VSD VGS = 0V, IS = 10A VDS = 15V, ID = 10A, VGS = 10V VDD = 15V, ID = 10A, VGS = 10V, RGEN = 0.3Ω 15 3.2 29 7 15 2.8 1.7 10 1.3 30 6.4 58 14 19.9 ns ns ns ns nC nC nC A V Ciss Coss Crss VDS = 15V, VGS = 0V, f = 1.0 MHz 970 160 85 pF pF pF VGS(th) RDS(on) VGS = VDS, ID = 250µA VGS = 10V, ID =10A VGS = 4.5V, ID =4.5A 1 12.5 17 3 15 22 V mΩ mΩ BVDSS IDSS IGSSF IGSSR VGS = 0V, ID = 250µA VDS = 30V, VGS = 0V VGS = 20V, VDS = 0V VGS = -20V, VDS = 0V 30 1 100 -100 V µA TA = 25 C unless otherwise noted Symbol Test Condition Min Typ Max Units 5 nA nA Drain-Source Diode Characteristics and Maximun Ratings Notes : a.Repetitive Rating : Pulse width limited by maximum junction temperature. b.Surface Mounted on FR4 Board, t < 10 sec. c.Pulse Test : Pulse Width < 300µs, Duty Cycle < 2%. d.Guaranteed by design, not subject to production testing. 2 CEM3120 10 VGS=10,8,6V 20 25 C ID, Drain Current (A) 6 ID, Drain Current (A) 8 16 12 4 8 2 4 TJ=125 C 0 -55 C 2 4 5 6 VGS=3.0V 0 0.0 0.2 0.4 0.6 0.8 1.0 0 1 VDS, Drain-to-Source Voltage (V) Figure 1. Output Characteristics 1260 1050 2.2 1.9 1.6 1.3 1.0 0.7 0.4 -100 VGS, Gate-to-Source Voltage (V) Figure 2. Transfer Characteristics C, Capacitance (pF) Ciss 840 630 420 210 0 0 5 10 15 20 25 Coss Crss RDS(ON), Normalized RDS(ON), On-Resistance(Ohms) ID=10A VGS=10V -50 0 50 100 150 200 VDS, Drain-to-Source Voltage (V) Figure 3. Capacitance 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 -50 TJ, Junction Temperature( C) Figure 4. On-Resistance Variation with Temperature VGS=0V 1 VTH, Normalized Gate-Source Threshold Voltage VDS=VGS ID=250µA IS, Source-drain current (A) 25 50 75 100 125 150 10 10 0 10 -25 0 -1 0.4 0.6 0.8 1.0 1.2 1.4 TJ, Junction Temperature( C) Figure 5. Gate Threshold Variation with Temperature VSD, Body Diode Forward Voltage (V) Figure 6. Body Diode Forward Voltage Variation with Source Current 3 CEM3120 VGS, Gate to Source Voltage (V) 10 VDS=20V ID=10A 10 2 RDS(ON)Limit ID, Drain Current (A) 8 4 10ms 100ms 1s DC 10 1 6 10 0 4 2 10 -1 0 0 3 6 9 12 15 10 -2 TA=25 C TJ=150 C Single Pulse 10 -2 10 -1 10 0 10 1 10 2 Qg, Total Gate Charge (nC) Figure 7. Gate Charge VDS, Drain-Source Voltage (V) Figure 8. Maximum Safe Operating Area VDD t on V IN D VGS RGEN G 90% toff tr 90% RL VOUT td(on) VOUT td(off) 90% 10% tf 10% INVERTED S VIN 50% 10% 50% PULSE WIDTH Figure 9. Switching Test Circuit Figure 10. Switching Waveforms 10 0 r(t),Normalized Effective Transient Thermal Impedance D=0.5 0.2 10 -1 0.1 0.05 0.02 0.01 PDM t1 t2 Single Pulse 1. RθJA (t)=r (t) * RθJA 2. RθJA=See Datasheet 3. TJM-TA = P* RθJA (t) 4. Duty Cycle, D=t1/t2 10 -2 10 -3 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 Square Wave Pulse Duration (sec) Figure 11. Normalized Thermal Transient Impedance Curve 4