CEM6861

CEM6861 P-Channel Enhancement Mode Field Effect Transistor FEATURES -60V, -3.5A, RDS(ON) = 125mΩ @VGS = -10V. RDS(ON) = 169mΩ @VGS = -4.5V. Super high dense cell design for extremely low RDS(ON). High power and current handing capability. Lead free product is acquired. Surface mount Package. D 8 D 7 D 6 D 5 SO-8 1 1 S 2 S 3 S 4 G ABSOLUTE MAXIMUM RATINGS Parameter Drain-Source Voltage Gate-Source Voltage Drain Current-Continuous Drain Current-Pulsed a TA = 25 C unless otherwise noted Symbol VDS VGS ID IDM PD TJ,Tstg Limit -60 Units V V A A W C ±20 -3.5 -15 2.5 -55 to 150 Maximum Power Dissipation Operating and Store Temperature Range Thermal Characteristics Parameter Thermal Resistance, Junction-to-Ambient b Symbol RθJA Limit 50 Units C/W Details are subject to change without notice . 1 Rev 1. 2006.Sep http://www.cetsemi.com CEM6861 Electrical Characteristics Parameter Off Characteristics Drain-Source Breakdown Voltage Zero Gate Voltage Drain Current Gate Body Leakage Current, Forward Gate Body Leakage Current, Reverse On Characteristics b Gate Threshold Voltage Static Drain-Source On-Resistance Dynamic Characteristics c Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Switching Characteristics c Turn-On Delay Time Turn-On Rise Time Turn-Off Delay Time Turn-Off Fall Time Total Gate Charge Gate-Source Charge Gate-Drain Charge Drain-Source Diode Forward Current Drain-Source Diode Forward Voltage b td(on) tr td(off) tf Qg Qgs Qgd IS VSD VGS = 0V, IS = -1.3A VDS = -30V, ID = -3.5A, VGS = -10V VDD = -30V, ID = -1A, VGS = -10V, RGEN = 6Ω 12 4 38 12 11 2.4 1.6 -3.5 -1.2 25 15 80 25 14 ns ns ns ns nC nC nC A V gFS Ciss Coss Crss VDS = -10V, ID = -3.5A VDS = -30V, VGS = 0V, f = 1.0 MHz 7 885 85 80 S pF pF pF VGS(th) RDS(on) VGS = VDS, ID = -250µA VGS = -10V, ID = -3.5A VGS = -4.5V, ID = -3.1A -1 99 130 -3 125 169 V mΩ mΩ BVDSS IDSS IGSSF IGSSR VGS = 0V, ID = -250µA VDS = -60V, VGS = 0V VGS = 20V, VDS = 0V VGS = -20V, VDS = 0V -60 -1 100 -100 V µA Tc = 25 C unless otherwise noted Symbol Test Condition Min Typ Max Units nA nA 6 Drain-Source Diode Characteristics and Maximun Ratings Notes : a.Repetitive Rating : Pulse width limited by maximum junction temperature. b.Pulse Test : Pulse Width < 300µs, Duty Cycle < 2%. c.Guaranteed by design, not subject to production testing. 2 CEM6861 10 10 -ID, Drain Current (A) -VGS=10,8,6,5V -ID, Drain Current (A) 8 8 25 C 6 6 4 4 2 -VGS=3.0V 2 TJ=125 C -55 C 0 0.0 0 0.5 1.0 1.5 2.0 2.5 0 1 2 3 4 5 6 -VDS, Drain-to-Source Voltage (V) Figure 1. Output Characteristics 1200 1000 800 600 400 200 0 0 Crss 6 12 18 24 30 Coss Ciss 2.2 1.9 1.6 1.3 1.0 0.7 0.4 -100 -VGS, Gate-to-Source Voltage (V) Figure 2. Transfer Characteristics RDS(ON), Normalized RDS(ON), On-Resistance(Ohms) ID=-3.5A VGS=-10V C, Capacitance (pF) -50 0 50 100 150 200 -VDS, Drain-to-Source Voltage (V) Figure 3. Capacitance 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 -50 TJ, Junction Temperature( C) Figure 4. On-Resistance Variation with Temperature -IS, Source-drain current (A) VGS=0V VTH, Normalized Gate-Source Threshold Voltage VDS=VGS ID=-250µA 10 1 10 0 10 -25 0 25 50 75 100 125 150 -1 0.4 0.6 0.8 1.0 1.2 1.4 TJ, Junction Temperature( C) Figure 5. Gate Threshold Variation with Temperature -VSD, Body Diode Forward Voltage (V) Figure 6. Body Diode Forward Voltage Variation with Source Current 3 CEM6861 -VGS, Gate to Source Voltage (V) 10 V =-30V DS ID=-3.5A 8 10 2 -ID, Drain Current (A) 10 1 RDS(ON)Limit 6 10 0 1ms 10ms 100ms 1s DC 4 2 10 -1 6 TA=25 C TJ=150 C Single Pulse 10 -2 0 0 3 6 9 12 10 -2 10 -1 10 0 10 1 10 2 Qg, Total Gate Charge (nC) Figure 7. Gate Charge -VDS, Drain-Source Voltage (V) Figure 8. Maximum Safe Operating Area VDD t on V IN D VGS RGEN G 90% toff tr 90% RL VOUT td(on) VOUT td(off) 90% 10% tf 10% INVERTED S VIN 50% 10% 50% PULSE WIDTH Figure 9. Switching Test Circuit Figure 10. Switching Waveforms 10 0 r(t),Normalized Effective Transient Thermal Impedance D=0.5 0.2 10 -1 0.1 0.05 0.02 0.01 PDM t1 t2 Single Pulse 1. RθJA (t)=r (t) * RθJA 2. RθJA=See Datasheet 3. TJM-TA = P* RθJA (t) 4. Duty Cycle, D=t1/t2 10 -2 10 -3 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 Square Wave Pulse Duration (msec) Figure 11. Normalized Thermal Transient Impedance Curve 4