CEU2303

CED2303/CEU2303 P-Channel Enhancement Mode Field Effect Transistor FEATURES -30V, -9A, RDS(ON) = 200mΩ @VGS = -10V. RDS(ON) = 320mΩ @VGS = -4.5V. Super high dense cell design for extremely low RDS(ON). High power and current handing capability. Lead free product is acquired. TO-251 & TO-252 package. D PRELIMINARY D G S CEU SERIES TO-252(D-PAK) G D G S CED SERIES TO-251(I-PAK) S ABSOLUTE MAXIMUM RATINGS Parameter Drain-Source Voltage Gate-Source Voltage Drain Current-Continuous Drain Current-Pulsed a Tc = 25 C unless otherwise noted Symbol Limit VDS VGS ID IDM PD TJ,Tstg -30 Units V V A A W W/ C C ±20 -9 -27 33 0.22 -55 to 175 Maximum Power Dissipation @ TC = 25 C - Derate above 25 C Operating and Store Temperature Range Thermal Characteristics Parameter Thermal Resistance, Junction-to-Case Thermal Resistance, Junction-to-Ambient Symbol RθJC RθJA Limit 4.5 50 Units C/W C/W 2004.November 6 - 46 http://www.cetsemi.com CED2303/CEU2303 Electrical Characteristics Parameter Off Characteristics Drain-Source Breakdown Voltage Zero Gate Voltage Drain Current Gate Body Leakage Current, Forward Gate Body Leakage Current, Reverse On Characteristics b Gate Threshold Voltage Static Drain-Source On-Resistance Forward Transconductance Dynamic Characteristics Input Capacitance Output Capacitance Reverse Transfer Capacitance Switching Characteristics c Turn-On Delay Time Turn-On Rise Time Turn-Off Delay Time Turn-Off Fall Time Total Gate Charge Gate-Source Charge Gate-Drain Charge Drain-Source Diode Forward Current Drain-Source Diode Forward Voltage b td(on) tr td(off) tf Qg Qgs Qgd IS VSD VGS = 0V, IS = -4.5A VDS = -15V, ID = -4.5A, VGS = -10V VDD = -15V, ID = -1A, VGS = -10V, RGEN = 6Ω 10 10 20 6 6 0.8 1.5 -9 -1.5 20 20 35 20 10 ns ns ns ns nC nC nC A V c Tc = 25 C unless otherwise noted Symbol BVDSS IDSS IGSSF IGSSR VGS(th) RDS(on) gFS Ciss Coss Crss Test Condition VGS = 0V, ID = -250µA VDS = -24V, VGS = 0V VGS = 20V, VDS = 0V VGS = -20V, VDS = 0V VGS = VDS, ID = -250µA VGS = -10V, ID = -4.5A VGS = -4.5V, ID = -2.7A VDS = -10V, ID = -4.5A 5 230 90 20 -1 Min -30 -1 100 -100 -3 200 320 Typ Max Units V µA nA nA V mΩ mΩ S pF pF pF 6 VDS = -15V, VGS = 0V, f = 1.0 MHz Drain-Source Diode Characteristics and Maximun Ratings Notes : a.Repetitive Rating : Pulse width limited by maximum junction temperature. b.Pulse Test : Pulse Width < 300µs, Duty Cycle < 2%. c.Guaranteed by design, not subject to production testing. 6 - 47 CED2303/CEU2303 10 -VGS=10,8,6V 10 25 C -ID, Drain Current (A) 8 -VGS=2.0V 6 -VGS=2.5V -ID, Drain Current (A) 8 6 4 4 2 -VGS=1.5V 2 TJ=125 C 0 -55 C 0 0 2 4 6 8 10 0 1 2 3 4 5 6 -VDS, Drain-to-Source Voltage (V) Figure 1. Output Characteristics 300 250 200 150 100 50 Crss 0 0 5 10 15 20 25 Coss Ciss 2.2 1.9 1.6 1.3 1.0 0.7 0.4 -100 -VGS, Gate-to-Source Voltage (V) Figure 2. Transfer Characteristics RDS(ON), Normalized RDS(ON), On-Resistance(Ohms) ID=-4.5A VGS=-10V C, Capacitance (pF) -50 0 50 100 150 200 -VDS, Drain-to-Source Voltage (V) Figure 3. Capacitance 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 -50 TJ, Junction Temperature( C) Figure 4. On-Resistance Variation with Temperature -IS, Source-drain current (A) VGS=0V 1 VTH, Normalized Gate-Source Threshold Voltage VDS=VGS ID=-250µA 10 10 0 10 -25 0 25 50 75 100 125 150 -1 0.4 0.6 0.8 1.0 1.2 1.4 TJ, Junction Temperature( C) Figure 5. Gate Threshold Variation with Temperature -VSD, Body Diode Forward Voltage (V) Figure 6. Body Diode Forward Voltage Variation with Source Current 6 - 48 CED2303/CEU2303 -VGS, Gate to Source Voltage (V) 10 VDS=-15V ID=-4.5A 8 10 2 RDS(ON)Limit -ID, Drain Current (A) 10 1 6 1ms 10ms 100ms DC 4 10 0 2 0 0 2 4 6 10 -1 TC=25 C TJ=175 C Single Pulse 0 6 10 1 10 10 2 Qg, Total Gate Charge (nC) Figure 7. Gate Charge -VDS, Drain-Source Voltage (V) Figure 8. Maximum Safe Operating Area VDD t on V IN D VGS RGEN G 90% toff tr 90% RL VOUT td(on) VOUT td(off) 90% 10% tf 10% INVERTED S VIN 50% 10% 50% PULSE WIDTH Figure 9. Switching Test Circuit Figure 10. Switching Waveforms r(t),Normalized Effective Transient Thermal Impedance 10 0 D=0.5 0.2 10 -1 0.1 0.05 0.02 0.01 Single Pulse PDM t1 t2 1. RθJC (t)=r (t) * RθJC 2. RθJC=See Datasheet 3. TJM-TC = P* RθJC (t) 4. Duty Cycle, D=t1/t2 10 -2 10 -2 10 -1 10 0 10 1 10 2 10 3 10 4 Square Wave Pulse Duration (msec) Figure 11. Normalized Thermal Transient Impedance Curve 6 - 49