0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
CM2596SSCN263

CM2596SSCN263

  • 厂商:

    CHAMP

  • 封装:

  • 描述:

    CM2596SSCN263 - 3A STEP DOWN VOLTAGE REGULATOR - Champion Microelectronic Corp.

  • 详情介绍
  • 数据手册
  • 价格&库存
CM2596SSCN263 数据手册
CM2596S 3A STEP DOWN VOLTAGE REGULATOR GENERAL DESCRIPTION The CM2596S series are step-down switching regulators with all required active functions. It is capable of driving 3A load with excellent line and load regulations. These devices are available in fixed output voltages of 3.3V, 5V, and an adjustable output version. The CM2596S series offers a high-efficiency replacement for popular three-terminal linear regulators. Also it requires a minimum number of external components. It substantially not only reduces the area of board size but also the size of the heat sink, and in some cases no heat sink is required. ±4% tolerance on output voltage within specified input voltages and output load conditions is guaranteed. Also, the oscillator frequency accuracy is within ±15%. External shutdown is included, featuring 150μA (typical) standby current. The output switch includes cycle-by-cycle current limiting, as well as thermal shutdown for full protection under fault conditions. FEATURES Guaranteed 3A output current 3.3V, 5V, and adjustable versions Wide input voltage range, up to 40V Internal oscillator of 150KHz fixed frequency Wide adjustable version output voltage range, from 1.23V to 37V±4% max over line and load conditions Low standby current, typ. 150μA, at shutdown mode Requires only 4 external components Thermal shutdown and current limit protection Requires only 4 external components Excellent line and load regulation specifications TTL shutdown capability APPLICATIONS LCD Monitors ADD-ON Cards Switching Regulators High Efficiency Step-Down Regulators Efficient Pre-regulator for Linear Regulators ORDERING INFORMATION Package Type TO-220 CM2596SSCN220 CM2596SZJCN220 CM2596SCN220 CM2596SGSCN220 CM2596SGZJCN220 CM2596SGCN220 CM2596SGCN220B TO-263 CM2596SSCN263 CM2596SZJCN263 CM2596SCN263 CM2596SGSCN263 CM2596SGZJCN263 CM2596SGCN263 Output Voltage 3.3V 5.0V ADJ. 3.3V 5.0V ADJ. ADJ CM2596S X XXX Lead Free Blank: Normal G: Lead Free package Output Voltage C: Adjustable SC: 3.3V ZJC: 5V Package Type N: TO package Package 220:TO-220 263:TO-263 2006/11/27 Rev 1.0 Champion Microelectronic Corporation Page 1 CM2596S 3A STEP DOWN VOLTAGE REGULATOR PIN CONFIGURATION TO-220 Top View TO-220B Top View TO-263 Top View ENABLE FB GND V OUT GND ENABLE 5 4 3 2 1 V IN FB V OUT V IN 12 3 4 5 ABSOLUTE MAXIMUM RATINGS Input Voltage (VPOWER) …….………………………………………….……. +45V ENABLE Pin Input Voltage ….…………………………………. –0.3V ≦V≦25V Storage Temperature ………………………………….….…... -65℃ to +150℃ Lead Temperature (10 sec.) ……..……………………..….…………….... 260℃ Operating Temperature ……..……………………..….……………....... -40℃ to +125℃ POWER DISSIPATION TABLE Package ΘJA (℃/W) Derating factor (mW/℃) TA >= 25℃ TO-220(B) TO-263 28 23 22.2 22.2 TA
CM2596SSCN263
物料型号: - CM2596S系列提供了固定输出电压版本(3.3V和5V)和可调输出电压版本。

器件简介: - CM2596S系列是降压开关稳压器,具备所有必需的主动功能,能够驱动3A负载,并具有出色的线路和负载调整率。这些设备提供3.3V、5V的固定输出电压版本以及可调输出版本。

引脚分配: - 文档提供了CM2596S的引脚配置图,展示了各个引脚的功能。

参数特性: - 保证3A输出电流,宽输入电压范围(高达40V),内部150kHz固定频率的振荡器,可调版本输出电压范围从1.23V至37V±4%,待机电流典型值150μA,仅需要4个外部组件,热关闭和电流限制保护。

功能详解: - CM2596S系列提供了高效率的替代方案,替代流行的三端线性稳压器,并且只需要最少数量的外部组件。在某些情况下,甚至不需要散热器。

应用信息: - 适用于LCD监视器、附加卡开关稳压器、高效率降压稳压器、线性稳压器的高效预稳压器等。

封装信息: - 提供了TO-220和TO-263两种封装类型的详细尺寸信息。
CM2596SSCN263 价格&库存

很抱歉,暂时无法提供与“CM2596SSCN263”相匹配的价格&库存,您可以联系我们找货

免费人工找货