CM8561IS

CM8561 1.5A SINK & SOURCE ADJUSTABLE LINEAR BUS TERMINATOR GENERAL DESCRIPTION The CM8561 is a low cost linear regulator designed to provide a desired output voltage or termination voltage for various applications by converting voltage supplies ranging from 1.6V to 6.0V. The desired output voltage could be programmable by two external voltage divider resistors. The CM8561 is capable of sourcing or sinking up to 1.5A of current while regulating an output VOUT voltage to within 2% (DDR-I), 3% (DDR-II) or less. The CM8561 provides low profile 8-pin SOIC package to save system space. FEATURES Ideal for DDR-I and DDR-II 8-pin SOIC package Source and sink up to 1.5A, no heat sink required Integrated power MOSFETs Programmable output voltage by external resistors Output voltage could go down to 0.6V Iccq at VCCA ~ 230uA Current limit protection and Short Circuit protection Thermal shutdown protection Shutdown for standby or suspend mode operation Minimum external components APPLICATIONS Mother Board PCI/AGP Graphics Game/ Play Station Set Top Box IPC SCSI-III Bus terminator PIN CONFIGURATION SOP-8 (S08) Top View 1 2 3 4 VIN VOUT REFEN VCCA GND GND GND GND 8 7 6 5 2006/10/11 Rev. 1.2 Champion Microelectronic Corporation Page 1 CM8561 1.5A SINK & SOURCE ADJUSTABLE LINEAR BUS TERMINATOR PIN DESCRIPTION Pin No. 1 2 5,6,7,8 3 4 VIN VOUT GND REFEN VCCA Symbol Input Power Output Voltage Ground Reference Voltage Input and Chip Enable Voltage supply for internal circuits VCCA-1.9 6 V V Description Min. Operating Rating Typ. Max. 2.5/1.8 6 6 Unit V V ORDERING INFORMATION Part Number CM8561IS CM8561GIS* *Note: Add suffix “G” for Pb Free Product Temperature Range -40℃ to 85℃ -40℃ to 85℃ Package 8-Pin SOP (S08) 8-Pin SOP (S08) BLOCK DIAGRAM VCCA VIN Current Limit Protection REFEN Control + VOUT - Thermal GND APPLICATION CIRCUITS VCCA VIN R1 100k VCCA VIN CIN 470uF CVCCA 10uF GND REFEN VOUT COUT 200uF VOUT EN Q1 R2 100k CSS 1uF 2006/10/11 Rev. 1.2 Champion Microelectronic Corporation Page 2 CM8561 1.5A SINK & SOURCE ADJUSTABLE LINEAR BUS TERMINATOR ABSOLUTE MAXIMUM RATINGS Absolute maximum ratings are those values beyond which the device could be permanently damaged. VIN, VCCA …….....................................…....……………..7V Output RMS Current, Source or Sink .....…………........…...1.5A Storage Temperature ……................……. -65°C to 125°C Lead Temperature (Soldering, 5 sec)……………….. 260°C Thermal Resistance(θJC )….. ……..………….. .15.7°C/W ELECTRICAL CHARACTERISTICS (Unless otherwise stated, these specifications apply TA=25°C; VIN=+2.5V and VCCA=+3.3V, VREFEN=1.25V) maximum ratings are stress ratings only and functional device operation is not implied. (Note 1) CM8561 Min. -20 0.8/1.2 0.8/1.2 190 90 2.5/1.8 3.15 3.3 5 Sinking Sourcing 3.15V -1.5A At Room Temp. REFEN= VIN and VCCA >= VREFEN + 1.9V on operation power on and power off sequences Note 4: Guaranteed by design, not 100% test 2006/10/11 Rev. 1.2 Champion Microelectronic Corporation Page 3 CM8561 1.5A SINK & SOURCE ADJUSTABLE LINEAR BUS TERMINATOR FUNCTIONAL DESCRIPTION The CM8561 is a linear regulator that is capable of sinking and sourcing 1.5A of current without an external heat sink. The CM8561 integrates power MOSFETs that are capable of source and sink 1.5A of current while maintaining excellent voltage regulation. The output voltage can be regulated within 3% or less by using the external feedback. Separate voltage supply inputs have been added to fit applications with various power supplies for the databus and power buses. INPUTS The input voltage pins (VIN) determine the output voltages (VOUT). At CM8561, the desired output voltage could be programmable by two external voltage divider resistors. VIN is suggested to connect to VDDQ of memory module for better tracking with memory VDDQ. OTHER SUPPLY VOLTAGES VCCA provide the voltage supply to the logic section and internal error amplifiers of CM8561. OUTPUTS The output voltage pins (VOUT) are tied to the databus, address, or clock lines via an external inductor. Output voltage is determined by the VIN. PACKAGE DIMENSION 8-Pin SOP (S08) PIN 1 ID θ θ 2006/10/11 Rev. 1.2 Champion Microelectronic Corporation Page 4 CM8561 1.5A SINK & SOURCE ADJUSTABLE LINEAR BUS TERMINATOR IMPORTANT NOTICE Champion Microelectronic Corporation (CMC) reserves the right to make changes to its products or to discontinue any integrated circuit product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. A few applications using integrated circuit products may involve potential risks of death, personal injury, or severe property or environmental damage. CMC integrated circuit products are not designed, intended, authorized, or warranted to be suitable for use in life-support applications, devices or systems or other critical applications. Use of CMC products in such applications is understood to be fully at the risk of the customer. In order to minimize risks associated with the customer’s applications, the customer should provide adequate design and operating safeguards. HsinChu Headquarter 5F, No. 11, Park Avenue II, Science-Based Industrial Park, HsinChu City, Taiwan 300 T E L : +886-3-567 9979 F A X : +886-3-567 9909 http://www.champion-micro.com Sales & Marketing 7F-6, No. 32, Sec. 1, Chenggong Rd., Nangang District , Taipei City 115 , Taiwan T E L : +886-2-2788 0558 F A X : +886-2-2788 2985 2006/10/11 Rev. 1.2 Champion Microelectronic Corporation Page 5