CMPFCD86

CMPFCD86 PFC Diode (8A/600V) FEATURES Fast switching for high efficiency Low noise Trr = 20ns Low reverse leakage current High voltage super FRD PFC application MECHANICAL DATA Case : Molded plastic TO-220AC / TO-220FP / SMC Epoxy : UL94V-0 rate flame retardant Terminals : Solderable per MIL-STD-202 method 208 Mounting position : Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave , 60Hz , resistive or inductive load. For capacitive load , derate current by 20% CMPFCD86 Rating VRRM VRMS VDC IF(AV) IFSM VF IR Trr CJ RθJC TJ TSTG Recurrent Peak Reverse Voltage RMS Voltage DC Blocking Voltage Average Forward Rectified Current @Tc=140℃ Peak Forward Surge Current 8.3ms single half sine-wave Super imposed on rated load (JEDEC Method) Instantaneous Forward Voltage @8A DC Reverse Current @TJ=25℃ At Rated DC Blocking Voltage @TJ=150℃ Maximum Reverse Recovery Time Typical Junction Capacitance Typical Thermal Resistance Operating Temperature Range Storage Temperature Range (note1) (note2) (note3) 620 425 620 8.0 150 2.4 1.0 500 20 50 2.2 -65~175 -65~175 V V V A A V uA nS pF ℃/ W ℃ ℃ Symbol Characteristics Unit Notes : 1. Reverse recovery test conditions IF=0.5A , IR=1.0A , Irr=0.25A 2. Measured at 1.0MHz and applied reverse voltage of 4.0 Volts DC. 3. Thermal Resistance junction to case. 2009/04/30 Rev1.0 Champion Microelectronic Corporation Page 1 CMPFCD86 PFC Diode (8A/600V) TYPICAL CHARACTERISTICS 2009/04/30 Rev1.0 Champion Microelectronic Corporation Page 2 CMPFCD86 PFC Diode (8A/600V) Application Circuit PACKAGE DIMENSION TO-220AC Dimensions in inches and (millimeters) 2009/04/30 Rev1.0 Champion Microelectronic Corporation Page 3 CMPFCD86 PFC Diode (8A/600V) TO-220FP Dimensions in inches and (millimeters) SMC Dimensions in inches and (millimeters) 2009/04/30 Rev1.0 Champion Microelectronic Corporation Page 4 CMPFCD86 PFC Diode (8A/600V) IMPORTANT NOTICE Champion Microelectronic Corporation (CMC) reserves the right to make changes to its products or to discontinue any integrated circuit product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. A few applications using integrated circuit products may involve potential risks of death, personal injury, or severe property or environmental damage. CMC integrated circuit products are not designed, intended, authorized, or warranted to be suitable for use in life-support applications, devices or systems or other critical applications. customer should provide adequate design and operating safeguards. Use of CMC products in such applications is understood to be fully at the risk of the customer. In order to minimize risks associated with the customer’s applications, the HsinChu Headquarter 5F, No. 11, Park Avenue II, Science-Based Industrial Park, HsinChu City, Taiwan T E L : +886-3-567 9979 F A X : +886-3-567 9909 http://www.champion-micro.com Sales & Marketing 21F., No. 96, Sec. 1, Sintai 5th Rd., Sijhih City, Taipei County 22102, Taiwan R.O.C T E L : +886-2-2696 3558 F A X : +886-2-2696 3559 2009/04/30 Rev1.0 Champion Microelectronic Corporation Page 5