GS1J

GS1A thru GS1M SERIES SURFACE MOUNT RECTIFIER CHENG- YI CHENGELECTRONIC VOLTAGE RANGE 50 TO 1000 Volts CURRENT 1.0 Amperes SMA/DO-214AC FEATURES For surface mounted applications Low profile package Built-in strain relief Easy pick and place Plastic package has Underwrites Laboratory Flammability Classification 94V-O Glasspassivated chip junction high tempreature soldering:2600C/10seconds at terminals .055(1.40) .062(1.60) .098(2.50) .114(2.90) .157(4.00) .181(4.60) .006(.152) .012(.305) .078(2.00) .096(2.44) .030(0.76) .060(1.52) .004(.102) .008(.203) .188(4.80) .208(5.28) MECHANICAL DATA Case:JEDEC Do-201AD molded plastic Terminals:plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity:Indivated by cathode band Standard Packaging: 12mm tape (EIA STD EIA-481) Weight:0.002 ounce, 0.064 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 250C ambient temperature unless otherwise specified. Signle phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, at 0 T L =100 C SYMBOL GS1A VRRM VRMS VDC I(AV) IFSM VF 0 GS1B 100 70 100 GS1D 200 140 200 1.0 GS1G 400 280 400 GS1J 600 420 600 GS1K 800 560 800 GS1M 1000 700 1000 UNITS Volts Volts Volts Amps Amps Volts A S pF 0 50 35 50 Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 1.0A Maximum DC Reverse Current at Rated DC Blocking Voltage Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Maximum Thermal Resistance (Note 3) Operating and Storage Temperature Range @TA=25 C @TA=1250C 30.0 1.10 5.0 50 2.5 12.0 30.0 -50 to +150 IR TRR CJ R JL TJ TSTG C/W 0 C Notes : 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A 2. Measured at 1 MHz and Applied Vr=4.0 volts 3. 8.0mm2(0.13mm thick) land areas GS1A thru GS1M SERIES SURFACE MOUNT RECTIFIER CHENG- YI CHENGELECTRONIC RATING AND CHARACTERISTICS CURVES GS1A THRU GS1M Fig. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD Fig. 1 - FORWARD CURRENT DERATING CURVE 2.0 PEAK FORWARD SURGE CURRENT, (A) SURGE CURRENT 30 25 8.3ms Single Half Sine-Wave JEDEC Method AVERAGE FORWARD CURRENT, (A) 1.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INOUCTIVE LOAD P.C.B MOUNTED ON 0.315x0.315"(8.0x8.0mm) COPPER PAD AREAS 20 15 10 5 0 25 50 75 100 125 150 175 1 2 5 10 20 50 100 LEAD TEMPERATURE, 0C NUMBER OF CYCLES AT 60 Hz Fig. 3 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (uA) 100 10 0 TJ=125C INSTANTANEOUS REVERSE CURRENT MICROAMPERES Fig. 4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 50 20 10 5 2 1 0.5 0.2 0.1 0.05 0.02 0.01 0.4 1 0.1 0.01 0.001 0 20 40 60 80 100 120 140 0 TJ=75C 0 TJ=25C 0.6 0.8 1 1.2 1.4 1.6 1.8 2 INSTANTANEOUS FORWARD VOLTAGE, (V) PERCENT OF PEAK REVERSE VOLTAGE, % Fig. 5 - TRANSIENT THERMAL IMPEDANCE THERMAL IMPEDANCE ( 0C/W ) 1,000 500 200 100 50 20 10 5 2 1 0.01 Fig. 6 - TYPICAL JUNCTION CAPACITANCE 100 CAPACITANCE-pF Units Mounted on 2 20in2(5. 4mm)+0 .5mil inches (0.013mm) Thick Copper Land Areas 50 20 10 5 2 1 0.01 0 TJ=25C f=1.0MHz Vsig=50m Vp-p 0.1 1 10 100 0.1 1 10 100 HEATING TIME (SEC) REVERSE VOLTAGE(V)