MP6005

MP6 SERIES SINGLE-PHASE SILICON BRIDGE CHENG- YI ELECTRONIC REVERSE VOLTAGE -50 to 1000 Volts FORWARD CURRENT -6.0 Amperes FEATURES Surge overload rating - 125 amperes peak Low forward voltage drop Small size: simple installation Silver Plated Copper Leads Mounting Position: Any Case: Molded plastic with Heatsink interally mounted in the bridge encapsulation MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 250C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. MP6005 MP601 100 70 MP602 200 140 MP604 400 280 6.0 3.0 MP606 600 420 MP608 800 560 MP610 1000 700 UNITS V V A Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge Input Voltage Maximum Average Forward Rectified Outptu Current at Peak Forward Surge Current 8.3 ms single half sine-wave super imposed on rated load Maximum Forward Voltage Drop per Bridge Element at 3.0A Peak Maximum Reverse Current at Rated DC Blocking Voltage per Element Operating Temperature Range Storage Temperature Range TC TA TA=25 C TA=1000C 0 50 35 TC=1000C(Note1) TA=500C(Note2) 125 A 1.0 10.0 1.0 -55 to +125 -55 to +150 V A mA 0 C C 0 NOTES: 1. Unit mounted on metal chassis 2. Unit mounted on P Board .C. MP6 SERIES SINGLE-PHASE SILICON BRIDGE CHENG- YI ELECTRONIC RATING AND CHARACTERISTICS CURVES MP6 SERIES FIG. 1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT AVERAGE FORWARD OUTPUT CURRENT AMPERES 10 FIG. 2 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 8 HEAT-SINK MOUNTING TC 6 PC MOUNTING TA 1.0 4 TJ=25oC 0.1 2 0 50 100 150 0.01 0 20 40 60 80 100 120 140 TEMPERATURE, 0 C PERCENT OF RATED PEAK REVERSE VOLTAGE FIG.4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 FIG. 3 - MAXIMUM FORWARD SURGE CURRENT 125 INSTANTANEOUS FORWARD CURRENT, AMPERES 10 PEAK FORWARD SURGE CURRENT AMPERES 100 TJ=25oC 75 1.0 50 TJ=25oC 0.1 25 0 1 10 100 0.01 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 NUMBER OF CYCLES AT 60Hz INSTANTANEOUS FORWARD VOLTAGE, VOLTS