RS2004

RS2001 thru RS2007 SINLE-PHASE SILICON BRIDGE RECTIFIER CHENG- YI ELECTRONIC VOLTAGE RANGE -50 to 1000 Volts CURRENT -20 Amperes FEATURES Low leakage Low forward voltage Mounting position:Any Surge overload rating:250 amperes peak Siliver-plated copper leads MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 250C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. MAXIMUM RATINGS ( At TA=25 C unless otherwise noted) 0 Ratings Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge Input Voltage Maximum DC Blocking Voltage Maximum Average Forward Output Current at Tc=500C Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load Operating and Storage Temperature Range Maximum Forward Voltage Drop per element at 10.0A DC Maximum Reverse Current at Rated @TA=250C DC Blocking Voltage per element @TC=1000C Symbol VRRM VRMS VDC IO RS2001 RS2002 RS2003 RS2004 RS2005 RS2006 RS2007 50 35 50 100 75 100 200 140 200 400 280 400 20 600 420 600 800 560 800 1000 700 1000 UNITS Volts Volts Volts Amps IFSM TJ TSTG VF IR 250 -55 to +150 1.0 10 0.2 Amps 0 C Volts Amps mAmps RS2001 thru RS2007 SINLE-PHASE SILICON BRIDGE RECTIFIER CHENG- YI ELECTRONIC RATING AND CHARACTERISTICS CURVES RS2001 THRU RS2007 Fig. 2 - MAXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES 300 Fig. 1 - FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT AMPERES 25 20 15 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD WITH HEATSINK 200 10 5 0 20 40 60 80 100 120 140 100 Single Half Sine-Wave (JEDEC METHOD) WITHOUT HEATSINK 0 1 2 5 10 20 50 100 CASE TEMPERATURE, 0C NUMBER OF CYCLES AT 60Hz Fig. 3 - TYPICAL JUNCTION CAPACITANCE 100 100 Fig. 4 - TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, (A) 10 CAPACITANCE, (pF) 10 1.0 0.1 TJ=25C PULSE WIDTH:300 0 0 TJ=25C, f= 1MHz S 1.0 1.0 4.0 10.0 100 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 REVERSE VOLTAGE, VOL TS INSTANTANEOUS FORWARD VOLT AGE, VOLTS Fig. 5 - TYPICAL REVERSE CHARACTERISTICS A) INSTANTANEOUS REVERSE CURRENT, ( 1000 0 TJ=125C 100 0 TJ=100C 10 TJ=500C 1.0 TJ=250C 0.1 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)