S3M

S3A thru S3M SERIES SURFACE MOUNT RECTIFIER CHENG- YI CHENGELECTRONIC VOLTAGE RANGE 50 TO 1000 Volts CURRENT 3.0 Amperes SMC/DO-214AB FEATURES For surface mounted applications Low profile package Built-in strain relief Easy pick and place Plastic package has Underwrites Laboratory Flammability Classification 94V-O Glasspassivated chip junction high tempreature soldering:2600C/10seconds at terminals .108(2.75) .124(3.15) .220(5.59) .245(6.22) .260(6.60) .280(7.11) .006(.152) .012(.305) .079(2.00) .103(2.62) .030(0.76) .060(1.52) .004(.102) .008(.203) MECHANICAL DATA Case:JEDEC Do-201AD molded plastic Terminals:plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity:Indivated by cathode band Standard Packaging: 16mm tape (EIA STD EIA-481) Weight:0.007 ounce, 0.21 gram .305(7.75) .320(8.13) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 250C ambient temperature unless otherwise specified. Signle phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, at T L =750C SYMBOL VRRM VRMS VDC I(AV) IFSM VF 0 S3A 50 35 50 S3B 100 70 100 S3D 200 140 200 3.0 100 1.20 5.0 250 2.5 60 13 47 S3G 400 280 400 S3J 600 420 600 S3K 800 560 800 S3M 1000 700 1000 UNITS Volts Volts Volts Amps Amps Volts A S pF 0 Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 3.0A Maximum DC Reverse Current at Rated DC Blocking Voltage Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Maximum Thermal Resistance (Note 3) Operating and Storage Temperature Range R R @TA=25 C @TA=1250C IR TRR CJ JL JL C/W 0 TJ TSTG -50 to +150 C Notes : 1. Reverse Recovery Test Conditions: IF=0.5A, I R=1.0A, Irr=0.25A 2. Measured at 1 MHz and Applied Vr= 4.0 volts 3. 8.0mm2(0.13mm thick) land areas S3A thru S3M SERIES SURFACE MOUNT RECTIFIER CHENG- YI CHENGELECTRONIC RATING AND CHARACTERISTICS CURVES S3A THRU S3M Fig.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT Fig.1 - FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT AMPERES 200 3.0 2.5 2.0 1.5 1.0 0.5 0 50 60 70 80 90 100 110 120 130 140 150 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INOUCTIVE LOAD P.C.B MOUNTED ON 0.315x0.315"(8.0x8.0mm) COPPER PAD AREAS 100 50 10 1 8.3ms Single Half Sine Wave JEDEC Method 5 10 50 100 LEAD TEMPERATURE, 0C NUMBER OF CYCLES AT 60 Hz Fig.4 - TYPICAL JUNCTION CAPACIT ANCE Fig.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 100 CAPACITANCE-pF 50 INSTANTANEOUS FORWARD CURRENT, (A) 30 10 0 TJ=25C 10 3.0 5 1.0 TJ=25C Pulse Width-300 s 2% DUTY CYCLE 0 1 5 10 50 100 REVERSE VOLTAGE(V) 0.3 0.1 Fig.5 - TYPICAL REVERSE CHARACTERISTICS .03 INSTANTANEOUS REVERSE CURRENT, (mA) .01 0.6 100 0 TJ=125C 0.7 0.8 0.9 1.0 1.1 1.2 1.3 INSTANTANEOUS FORWARD VOLT AGE, (V) 10 1.0 0 TJ=25C 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE