CHDTB123EKPT

CHENMKO ENTERPRISE CO.,LTD SURFACE MOUNT PNP Digital Silicon Transistor VOLTAGE 50 Volts APPLICATION * Switching circuit, Inverter, Interface circuit, Driver circuit. C HDTB123EKPT CURRENT 500 mAmpere FEATURE * Small surface mounting type. (SC-59/SOT-346) * High current gain. * Suitable for high packing density. * * * * Low colloector-emitter saturation. High saturation current capability. Internal isolated PNP transistors in one package. Built in bias resistor(R1=2.2kΩ, Typ. ) SC-59/SOT-346 (2) (3) 0.95 2.7~3.1 0.95 (1) 1.7~2.1 CONSTRUCTION * One PNP transistors and bias of thin-film resistors in one package. 0.3~0.51 1.2~1.9 MARKING EK8 0.085~0.2 Gnd In 1 0.89~1.3 0.3~0.6 2.1~2.95 0~0.1 CIRCUIT 2 R2 TR R1 3 Out Dimensions in millimeters SC-59/SOT-346 LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL VCC VIN IC PTOT TSTG TJ RθJ-S Note 1. Transistor mounted on an FR4 printed-circuit board. 2004-01 PARAMETER Supply voltage Input voltage DC Output current Total power dissipation Storage temperature Junction temperature Thermal resistance CONDITIONS − MIN. MAX. -50 +10 -500 200 +150 150 140 V V UNIT -12 − Tamb ≤ 25 OC, Note 1 − −55 − junction - soldering point − mA mW O C C C/W O O RATING CHARACTERISTIC ( CHDTB123EKPT ) CHARACTERISTICS Tamb = 25 °C unless otherwise speciÞed. SYMBOL VIoff) VI(on) VO(on) II IC(off) hFE R1 R2/R1 fT PARAMETER Input off voltage Input on voltage Output voltage Input current Output current DC current gain Input resistor Resistor ratio Transition frequency IE=5mA, VCE=-10.0V f=100MHz = CONDITIONS IO=-100uA; VCC=-5.0V IO=-20mA; VO=-0.3V IO=-50mA; II=-2.5mA VI=-5.0V VI=0V; VCC=-50V IO=-50mA; VO=-5.0V − − − − 39 1.54 0.8 − MIN. -0.5 − − − − − − 2.2 1.0 200 TYP. − -3.0 -0.3 -3.8 -0.5 − 2.86 1.2 − KΩ MHz MAX. V V V mA uA UNIT Note 1.Pulse test: tp≤300uS; δ≤0.02. RATING CHARACTERISTIC CURVES ( CHDTB123EKPT ) Typical Electrical Characteristics Fig.1 Input voltage vs. output current (ON characteristics) -100 -50 VO=- 0.3V Fig.2 Output current vs. input voltage (OFF characteristics) -10m VCC =- 5V INPUT VOLTAGE : VI(on) (V) -20 -10 -5 -2 -1 -500m -200m -100m -500u -1m -10m -100m -500m Ta =- 40OC 25OC = 100OC OUTPUT CURRENT : Io (A) -1m Ta=100OC 25OC -40 OC -100u -10u -1u -0 -0.6 -1.0 -1.6 -2.0 -2.6 -3.0 OUTPUT CURRENT : IO (A) INPUT VOLTAGE : VI(off) (V) 1k 500 Fig.3 DC current gain vs. output current VO =- 5V OUTPUT VOLTAGE : VO(on) (V) Fig.4 Output voltage vs. output current -1 -500m lO/lI=20 Ta=100OC 25OC -40 OC DC CURRENT GAIN : GI 200 100 50 20 10 5 2 1 -500u -1m Ta=100OC 25OC -40OC -200m -100m -50m -20m -10m -5m -2m -10m -100m -500m -1m -500u -1m -10m -100m -500m OUTPUT CURRENT : IO (A) OUTPUT CURRENT : IO (A)