CHDTC363EUPT

CHENMKO ENTERPRISE CO.,LTD SURFACE MOUNT NPN Digital Silicon Transistor VOLTAGE 20 Volts APPLICATION * Switching circuit, Inverter, Interface circuit, Driver circuit. C HDTC363EUPT CURRENT 600 mAmpere FEATURE * Small surface mounting type. (SC-70/SOT-323) * High current gain. * Suitable for high packing density. * * * * Low colloector-emitter saturation. High saturation current capability. Internal isolated NPN transistors in one package. Built in bias resistor(R1=6.8kΩ, Typ. ) SC-70/SOT-323 (2) (3) 1.3±0.1 0.3±0.1 0.65 2.0±0.2 0.65 (1) CONSTRUCTION * One NPN transistors and bias of thin-film resistors in one package. 1.25±0.1 MARKING EUG Gnd In 1 0.05~0.2 0.1Min. 0.8~1.1 0~0.1 2.0~2.45 CIRCUIT 2 R2 TR R1 3 Out Dimensions in millimeters SC-70/SOT-323 LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL VCC VIN IC PTOT TSTG TJ RθJ-S Note 1. Transistor mounted on an FR4 printed-circuit board. 2005-06 PARAMETER Supply voltage Input voltage DC Output current Total power dissipation Storage temperature Junction temperature Thermal resistance CONDITIONS − MIN. MAX. 20 +10 600 200 +150 150 140 V V UNIT -10 − Tamb ≤ 25 OC, Note 1 − −55 − junction - soldering point − mA mW O C C C/W O O RATING CHARACTERISTIC ( CHDTC363EUPT ) CHARACTERISTICS Tamb = 25 °C unless otherwise speciÞed. SYMBOL VIoff) VI(on) VO(on) II IO(off) hFE R1 R2/R1 fT PARAMETER Input off voltage Input on voltage Output voltage Input current Output current DC current gain Input resistor Resistor ratio Transition frequency IE=-50mA, VCE=10.0V f=100MHz = CONDITIONS IO=100uA; VCC=5.0V IO=10mA; VO=0.3V IO=50mA; II=2.5mA VI=5V VI=0V; VCC=15V IO=50mA; VO=5.0V − − − − 70 4.76 0.8 − MIN. 0.5 − − 40 − − − 6.8 1.0 200 TYP. − 2.0 80 1.3 0.5 − 8.84 1.2 − KΩ MHz MAX. V V mV mA uA UNIT Note 1.Pulse test: tp≤300uS; δ≤0.02. RATING CHARACTERISTIC CURVES ( CHDTC363EUPT ) Typical Electrical Characteristics Fig.1 Input voltage vs. output current (ON characteristics) 100 50 VO= 0.3V Fig.2 Output current vs. input voltage (OFF characteristics) 10m VCC= 5V INPUT VOLTAGE : VI(on) (V) 20 10 5 2 1 500m 200m 100m 1m 10m 100m 500m Ta=100OC 25OC -40 OC OUTPUT CURRENT : Io (A) 1m Ta=100OC 25OC -40 OC 100u 10u 1u 0 1.0 2.0 3.0 OUTPUT CURRENT : IO (A) INPUT VOLTAGE : VI(off) (V) 1k 500 Fig.3 DC current gain vs. output current VO = 5V OUTPUT VOLTAGE : VO(on) (V) Fig.4 Output voltage vs. output current 1 lO/lI=20 500m DC CURRENT GAIN : GI 200 100 50 20 10 5 2 1 Ta=100OC 25OC -40OC 200m 100m 50m 20m 10m 5m 2m Ta=100OC 25OC -40 OC 1m 10m 100m 500m 1m 1m 10m 100m 500m OUTPUT CURRENT : IO (A) OUTPUT CURRENT : IO (A)