CHFMA5PT

CHENMKO ENTERPRISE CO.,LTD SURFACE MOUNT Dual Digital Silicon Transistor VOLTAGE 50 Volts APPLICATION * Switching circuit, Inverter, Interface circuit, Driver circuit. C HFMA5PT CURRENT 100 mAmpere FEATURE * Small surface mounting type. (SC-74A) * High current gain. * Suitable for high packing density. * * * * Low colloector-emitter saturation. High saturation current capability. tow CHDTA123J chips in apackage. Built in bias resistor(R1=2.2kΩ, Typ. ) (1) (5) SC-74A 1.7~2.1 (2) (3) 0.95 0.95 2.7~3.1 0.25~0.5 1.4~1.8 0.08~0.2 0.3~0.6 0.935~1.3 0~0.15 2.6~3.0 CIRCUIT 3 R1 R2 4 R1 R2 5 2 1 Dimensions in millimeters SC-74A LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL VCC VIN IO DC Output current IC(Max.) PTOT TSTG TJ Note 1. Transistor mounted on an FR4 printed-circuit board. 2004-04 PARAMETER Supply voltage Input voltage CONDITIONS − MIN. MAX. -50 +5 -100 V V UNIT -12 − − Tamb ≤ 25 OC, Note 1 − −55 − mA -100 300 +150 150 mW O Total power dissipation Storage temperature Junction temperature C C O RATING CHARACTERISTIC ( CHFMA5PT) CHARACTERISTICS Tamb = 25 °C unless otherwise speciÞed. SYMBOL VIoff) VI(on) VO(on) II IC(off) hFE R1 R2/R1 PARAMETER Input off voltage Input on voltage Output voltage Input current Output current DC current gain Input resistor Resistor ratio CONDITIONS IO=-100uA; VCC=-5.0V IO=-5.0mA; VO=-0.3V IO=-5mA; II=-0.25mA VI=-5V VI=0V; VCC=-50V IO=-10mA; VO=-5.0V − − − − 80 1.54 17 MIN. -0.5 − − -0.1 − − − 2.2 21 TYP. − -1.1 -0.3 -3.6 -0.5 − 2.86 26 KΩ MAX. V V V mA uA UNIT Note 1.Pulse test: tp≤300uS; δ≤0.02. RATING CHARACTERISTIC CURVES ( CHFMA5PT ) Typical Electrical Characteristics Fig.1 Input voltage vs. output current (ON characteristics) −100 VO=−0.3V Fig.2 Output current vs. input voltage (OFF characteristics) −10m −5m −2m −1m −500µ −200µ −100µ −50µ −20µ −10µ −5µ −2µ −1µ 0 Ta=100°C 25°C −40°C INPUT VOLTAGE : VI(on) (V) −20 −10 −5 −2 −1 −500m −200m −100m −100µ −200µ −500µ −1m −2m Ta=−40°C 25°C 100°C −5m −10m −20m −50m −100m OUTPUT CURRENT : Io (A) −50 VCC=−5V −0.5 −1.0 −1.5 −2.0 −2.5 −3.0 OUTPUT CURRENT : IO (A) INPUT VOLTAGE : VI(off) (V) Fig.3 DC current gain vs. output current 1k 500 Fig.4 Output voltage vs. output current −1 OUTPUT VOLTAGE : VO(on) (V) VO=−5V Ta=100°C 25°C −40°C −500m −200m −100m −50m −20m −10m −5m −2m −1m −100µ −200µ −500µ −1m −2m lO/lI=20 DC CURRENT GAIN : GI 200 100 50 20 10 5 2 Ta=100°C 25°C −40°C 1 −100µ −200µ −500µ −1m −2m −5m −10m −20m −50m −100m −5m −10m −20m −50m −100m OUTPUT CURRENT : IO (A) OUTPUT CURRENT : IO (A)