CHUMA1PT

CHENMKO ENTERPRISE CO.,LTD SURFACE MOUNT Dual Digital Silicon Transistor VOLTAGE 50 Volts APPLICATION * Switching circuit, Inverter, Interface circuit, Driver circuit. CHUMA1PT CURRENT 100 mAmpere FEATURE * Small surface mounting type. (SC-88A/SOT-353) * High current gain. * Suitable for high packing density. * * * * Low colloector-emitter saturation. High saturation current capability. tow CHDTA124E chips in apackage. Built in bias resistor(R1=22kΩ, Typ. ) (1) (5) SC-88A/SOT353 1.2~1.4 (2) (3) 0.65 0.65 2.0~2.5 0.15~0.35 1.15~1.35 0.08~0.15 0.1 Min. 0.8~1.1 0~0.1 2.15~2.45 CIRCUIT 3 R1 R2 2 R1 R2 1 4 5 Dimensions in millimeters SC-88A/SOT353 LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL VCC VIN IO PTOT TSTG TJ Note 1. Transistor mounted on an FR4 printed-circuit board. 2004-04 PARAMETER Supply voltage Input voltage DC Output current Total power dissipation Storage temperature Junction temperature CONDITIONS − MIN. MAX. -50 +10 -100 150 +150 150 V V UNIT -40 − Tamb ≤ 25 OC, Note 1 − −55 − mA mW O C C O RATING CHARACTERISTIC ( CHUMA1PT ) CHARACTERISTICS Tamb = 25 °C unless otherwise speciÞed. SYMBOL VIoff) VI(on) VO(on) II IC(off) hFE R1 R2/R1 PARAMETER Input off voltage Input on voltage Output voltage Input current Output current DC current gain Input resistor Resistor ratio CONDITIONS IO=-100uA; VCC=-5.0V IO=-5mA; VO=-0.2V IO=-10mA; II=-0.5mA VI=-5V VI=0V; VCC=-50V IO=-5mA; VO=-5.0V − − − − 56 15.4 0.8 MIN. -0.5 − − -0.1 − − − 22.0 1.0 TYP. MAX. − -3.0 -0.3 -0.36 -0.5 − 28.6 1.2 KΩ V V V mA uA UNIT Note 1.Pulse test: tp≤300uS; δ≤0.02. RATING CHARACTERISTIC CURVES ( CHUMA1PTT ) Typical Electrical Characteristics Fig.1 Input voltage vs. output current (ON characteristics) -100 -50 VO=- 0.3V Fig.2 Output current vs. input voltage (OFF characteristics) -10m VCC =- 5V -5m OUTPUT CURRENT : Io (A) INPUT VOLTAGE : VI(on) (V) -2m -1m -500 -200 -100 -50 -20 -10 -5 -2 -1 -0 -20 -10 -5 -2 -1 -500m -200m -100m -100 -200 -500 -1m -2m -5m -10m -20m -50m -100m Ta =- 40OC 25OC = 100OC Ta=100OC 25OC -40 OC -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 OUTPUT CURRENT : IO (A) INPUT VOLTAGE : VI(off) (V) Fig.3 DC current gain vs. output current 1k 500 DC CURRENT GAIN : GI Fig.4 Output voltage vs. output current -1 -500m OUTPUT VOLTAGE : VO(on) (V) VO =- 5V Ta=100OC 25OC -40OC lO/lI=20 Ta=100OC 25OC -40 OC 200 100 50 20 10 5 2 -200m -100m -50m -20m -10m -5m -2m 1 -100 -200 -500 -1m -2m -5m -10m -20m -50m -100m -1m -100 -200 -500 -1m -2m -5m -10m -20m -50m -100m OUTPUT CURRENT : IO (A) OUTPUT CURRENT : IO (A)