CHUMD3PT

CHENMKO ENTERPRISE CO.,LTD SURFACE MOUNT Dual Digital Silicon Transistor VOLTAGE 50 Volts APPLICATION * Switching circuit, Inverter, Interface circuit, Driver circuit. C HUMD3PT CURRENT 50 mAmpere FEATURE * Small surface mounting type. (SC-88/SOT-363) * High current gain. * Suitable for high packing density. * * * * Low colloector-emitter saturation. High saturation current capability. Both the CHDTA114E & CHDTC114E in one package. Built in bias resistor(R1=10kΩ, Typ. ) (1) (6) SC-88/SOT-363 1.2~1.4 0.65 0.65 2.0~2.2 MARKING * AD (4) 0.15~0.35 (3) 1.15~1.35 0.08~0.15 0.1 Min. 0.8~1.1 0~0.1 2.15~2.45 CIRCUIT 3 R1 R2 1 R2 4 R1 6 Dimensions in millimeters SC-88/SOT-363 CHDTA114E LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL VCC VIN IO DC Output current IC(Max.) PTOT TSTG TJ Total power dissipation Storage temperature Tamb ≤ 25 OC, Note 1 PARAMETER Supply voltage Input voltage CONDITIONS − -40 − − − −55 − MIN. MAX. -50 +10 -50 mA -100 150 +150 mW O UNIT V V C Junction temperature 150 O C Note Transistor mounted on an FR4 printed-circuit board. CHDTC114E LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL VCC VIN IO DC Output current IC(Max.) PTOT TSTG Total power dissipation Storage temperature Junction temperature Tamb ≤ 25 OC, Note 1 PARAMETER Supply voltage Input voltage CONDITIONS − -10 − − − −55 − MIN. MAX. 50 +40 50 mA 100 150 +150 150 mW O UNIT V V C TJ Note O C Transistor mounted on an FR4 printed-circuit board. CHDTA114E CHARACTERISTICS Tamb = 25 °C unless otherwise speciÞed. SYMBOL VIoff) VI(on) VO(on) II IC(off) hFE R1 R2/R1 fT PARAMETER Input off voltage Input on voltage Output voltage Input current Output current DC current gain Input resistor Resistor ratio Transition frequency IE=5mA, VCE=-10.0V f=100MHz = CONDITIONS IO=-100uA; VCC=-5.0V IO=-10mA; VO=-0.3V IO=-10mA; II=-0.5mA VI=-5V VI=0V; VCC=-50V IO=-5mA; VO=-5.0V − − − − 30 7.0 0.8 − MIN. -0.5 − − 0.1 − − − 10.0 1.0 250 TYP. MAX. − -3.0 -0.3 -0.88 -0.5 − 13.0 1.2 − KΩ MHz V V V mA uA UNIT Note Pulse test: tp≤300uS; δ≤0.02. CHDTC114E CHARACTERISTICS Tamb = 25 °C unless otherwise speciÞed. SYMBOL VIoff) VI(on) VO(on) II IC(off) hFE R1 R2/R1 fT PARAMETER Input off voltage Input on voltage Output voltage Input current Output current DC current gain Input resistor Resistor ratio Transition frequency IE=-5mA, VCE=10.0V f=100MHz = CONDITIONS IO=100uA; VCC=5.0V IO=10mA; VO=0.3V IO=10mA; II=0.5mA VI=5V VI=0V; VCC=50V IO=5mA; VO=5.0V − 3.0 − − − 30 7.0 0.8 − MIN. − − 0.1 − − − 10.0 1.0 250 TYP. MAX. 0.5 − 0.3 0.88 0.5 − 13.0 1.2 − KΩ MHz V V V mA uA UNIT Note Pulse test: tp≤300uS; δ≤0.02. RATING CHARACTERISTIC CURVES ( CHUMD3PT ) CHDTA114E Typical Electrical Characteristics Fig.1 Input voltage vs. output current (ON characteristics) -100 -50 VO=- 0.3V Fig.2 Output current vs. input voltage (OFF characteristics) -10m -5m OUTPUT CURRENT : Io (A) VCC =- 5V INPUT VOLTAGE : VI(on) (V) -2m -1m -500 -200 -100 -50 -20 -10 -5 -2 -1 -0 -20 -10 -5 -2 -1 -500m -200m -100m -100 -200 -500 -1m -2m -5m -10m -20m -50m -100m Ta =- 40OC 25OC = 100OC Ta=100OC 25OC -40 OC -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 OUTPUT CURRENT : IO (A) INPUT VOLTAGE : VI(off) (V) Fig.3 DC current gain vs. output current 1k 500 DC CURRENT GAIN : GI Fig.4 Output voltage vs. output current -1 -500m OUTPUT VOLTAGE : VO(on) (V) VO =- 5V Ta=100 C 25OC -40OC O lO/lI=20 Ta=100 C 25OC -40 OC O 200 100 50 20 10 5 2 1 -100 -200 -500 -1m -200m -100m -50m -20m -10m -5m -2m -2m -5m -10m -20m -50m -100m -1m -100 -200 -500 -1m -2m -5m -10m -20m -50m -100m OUTPUT CURRENT : IO (A) OUTPUT CURRENT : IO (A) RATING CHARACTERISTIC CURVES ( CHUMD3PT ) CHDTC114E Typical Electrical Characteristics Fig.1 Input voltage vs. output current (ON characteristics) 100 50 VO=0.3V Fig.2 Output current vs. input voltage (OFF characteristics) 10m 5m OUTPUT CURRENT : Io (A) VCC=5V INPUT VOLTAGE : VI(on) (V) 20 10 5 2 1 500m 200m 100m 100 200 500 1m 2m 5m 10m 20m 50m 100m Ta =- 40OC 25OC = 100OC 2m 1m 500 200 100 50 20 10 5 2 1 0 Ta=100OC 25OC -40 OC 0.5 1.0 1.5 2.0 2.5 3.0 OUTPUT CURRENT : IO (A) INPUT VOLTAGE : VI(off) (V) Fig.3 DC current gain vs. output current 1k 500 OUTPUT VOLTAGE : VO(on) (V) DC CURRENT GAIN : GI Fig.4 Output voltage vs. output current 1 500m lO/lI=20 Ta=100OC 25OC -40 OC VO =5V Ta=100 C 25OC -40OC O 200 100 50 20 10 5 2 1 100 200 200m 100m 50m 20m 10m 5m 2m 500 1m 2m 5m 10m 20m 50m100m 1m 100 200 500 1m 2m 5m 10m 20m 50m 100m OUTPUT CURRENT : IO (A) OUTPUT CURRENT : IO (A)