R1500PT

CHENMKO ENTERPRISE CO.,LTD SILICON RECTIFIER VOLTAGE RANGE 1200 - 2000 Volts FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Low cost * Low leakage * Low forward voltage drop * High current capability R 1200 PT THRU R2000 PT CURRENT 0.2 to 0.5 Ampere DO-41 0.034(0.9) DIA. 0.028(0.7) MECHANICAL DATA Case: JEDEC DO-41 molded plastic Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.35 gram 1.0(25.4) MIN. 0.205(5.2) 0.166(4.2) 0.107(2.7) DIA. 0.080(2.0) 1.0(25.4) MIN. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) DO-41 R2000PT 2000 1400 2000 200 UNITS Volts Volts Volts mAmps MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TA = 50 C Peak Forward Surge Current 8.3 ms single half sine-wave IFSM superimposed on rated load (JEDEC method) Typical Junction Capacitance ( Note ) Operating and Storage Temperature Range CJ TJ, TSTG 30 -65 to +175 pF o o SYMBOL VRRM VRMS VDC IO R1200PT 1200 840 1200 R1500PT 1500 1050 1500 500 R1800PT 1800 1260 1800 30 Amps C ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 0.5A/0.2A DC Maximum Reverse Current at rated DC blocking Voltage per leg @ T A = 2 5 oC @ TA = 100oC IR SYMBOL VF R1200PT R1500PT 2.0 5.0 50 30 R1800PT R2000PT 3.0 UNITS Volts uAmps uAmps uAmps 2001-6 Maximum Full Load Reverse Current Average, Full Cycle 0.375" (9.5mm) lead length at TL = 75oC NOTES : Measured at 1.0 MHZ and applied reverse voltage of 4.0 volts RATING CHARACTERISTIC CURVES ( R1200PT THRU R2000PT ) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 500 400 300 R1 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (mA) FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 50 8.3 ms Single Half Sine-Wave (JEDEC Method) 40 30 20 10 0 200 100 0 0 25 50 Single Half Wave 60HZ Resistive or Inductive Load 20 0~ R20 00 R1 80 0 75 100 125 150 175 200 0 2 4 6 8 10 20 40 60 80 100 AMBIENT TEMPERATURE, ( oC ) NUMBER OF CYCLES AT 60HZ FIG. 3 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT, (uA) 4 TJ = 100oC 1.0 0.4 0.1 .04 TJ = 25oC .01 1 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)