RB154PT

CHENMKO ENTERPRISE CO.,LTD SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 - 1000 Volts CURRENT 1.5 Amperes FEATURES * High reverse voltage to 1000V * Surge overload rating - 50 Amperes peak * Good for printed circuit board assembly R B151 PT THRU RB157 PT RB-15 .360(9.1) .340(8.6) .150(3.8) .130(3.3) MECHANICAL DATA Case: JEDEC RB-15 molded plastic Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Mounting position: Any Polarity: Polarity symbols marked on body Weight: 1.04 grams 1.2 (30.5) MIN. 1.0 (25.4) MIN. .032(0.8) POS. LEAD .028(0.7) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. .220(5.6 .180(4.6) .220(5.6) .180(4.6) Dimensions in inches and (millimeters) RB-15 UNITS Volts Volts Volts Amps MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TA = 25 C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 50 Amps o SYMBOL VRRM VRMS VDC IO RB151PT RB152PT RB153PT RB154PT RB155PT RB156PT RB157PT 50 35 50 100 70 100 200 140 200 400 280 400 1.5 600 420 600 800 560 800 1000 700 1000 Operating Temperature Range Storage Temperature Range TJ TSTG -55 to +125 -55 to +150 o C C o ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 1.0 A DC Maximum Reverse Current at rated DC blocking Voltage per element @ T A = 2 5 oC IR @ TA = 100oC 0.2 mAmps 2 001-6 SYMBOL VF RB151PT RB152PT RB153PT RB154PT RB155PT RB156PT RB157PT UNITS Volts uAmps 1.0 10 RATING CHARACTERISTIC CURVES ( RB151PT THRU RB157PT ) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, (A) 2.5 2.0 1.5 1.0 Single Half Wave 60HZ Resistive or Inductive Load PEAK FORWARD SURGE CURRENT, (A) FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 70 60 50 40 30 20 10 0 8.3 ms Single Half Sine-Wave (JEDEC Method) 0.5 0 0 20 40 60 80 100 120 140 160 0 2 4 6 8 10 20 40 60 80 100 AMBIENT TEMPERATURE, ( oC ) NUMBER OF CYCLES AT 60HZ FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARCTERISTICS 20 INSTANTANEOUS FORWARD CURRENT, (A) 10 INSTANTANEOUS REVERSE CURRENT, (uA) FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 4 TJ = 100oC 1.0 TJ = 25oC 1.0 0.4 0.1 0.1 .04 TJ = 25oC PULSE WIDTH=300uS 1% DUTY CYCLE .01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, (V) .01 1 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)