RL756PT

CHENMKO ENTERPRISE CO.,LTD SILICON RECTIFIER VOLTAGE RANGE 50 - 600 Volts FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Low cost * Low leakage * Low forward voltage drop * High current capability * High surge current capabilty R L750PT THRU RL756PT CURRENT 6.0 Amperes RA-L .410(10.4) .380(9.70) DIA. .052(1.3) .048(1.2) 1.0(25.4) MIN. MECHANICAL DATA Case: JEDEC RA-L molded plastic Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 2.50 grams 1.0(25.4) MIN. .250(6.4) .235(6.0) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) RA-L RL756PT 600 420 600 UNITS Volts Volts Volts MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TA = 60oC P.C. Board Mounting TL = 60oC .125" , (3.18mm) lead lengths Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance R JL SYMBOL VRRM VRMS VDC RL750PT 50 35 50 RL751PT 100 70 100 RL752PT 200 140 200 RL754PT 400 280 400 IO 6.0 22 400 10 -65 to +175 Amps IFSM R Amps o at 0.5" (12.7mm) lead length JL C/W o Operating and Storage Temperature Range TJ, TSTG C ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 6.0 A VF 100 A Maximum Reverse Current at rated DC blocking Voltage per leg @ T A = 2 5 oC @ TA = 100oC IR 1.25 0.025 1.0 mAmps 2 001-6 SYMBOL RL750PT RL751PT RL752PT 0.90 Volts RL754PT RL756PT UNITS NOTES : Enough heat sink must be considered in application. RATING CHARACTERISTIC CURVES ( RL750PT THRU RL756PT ) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, (A) 6 5 4 3 2 1 0 0 25 50 75 100 125 150 LEAD TEMPERATURE, ( oC ) 175 200 Single Phase Half Wave 60Hz Resistive or Inductive Load PEAK FORWARD SURGE CURRENT, ( A ) FIG. 2 - MAXIMUM NON-REPETIVE FORWARD SURGE CURRENT 600 500 400 300 200 100 0 8.3ms Single Half Sine-Wave (JEDEC Method) 1 2 5 10 20 NUMBER OF CYCLES AT 60 Hz 50 100 FIG. 3 - TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 100 INSTANTANEOUS FORWARD CURRENT, ( A ) INSTANTANEOUS REVERSE CURRENT, (uA) 100 FIG. 4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS Pulse Width = 300uS 1% Duty Cycle 10 10 1.0 TJ =100oC 1.0 TJ =25oC .1 TJ =25oC .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, ( % ) 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, ( V ) FIG. 5 - TYPICAL THERMAL RESISTANCE VS LEAD LENGTH THERMAL RESISTANCE ( oC/W ) 25 20 15 10 5 0 0 .1 .2 .3 .4 .5 .6 .7 .8 .9 1.0 EQUAL LEAD LENGTH TO HEAT SINK, (IN)