SBM17PT

CHENMKO ENTERPRISE CO.,LTD SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 70 - 100 Volts CURRENT 1.0 Ampere FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * For surface mounted applications * Low profile package * Built-in strain relief * Metal silicon junction, majority carrier conduction * Low power loss, high efficiency * High current capability, low forward voltage drop * High surge capability * For use in low voltage high frequency inverters, free wheeling, and polarity protection applications * High temperature soldering guaranteed : 260oC/10 seconds at terminals S BM17PT THRU SBM110PT SMB 0.155 (3.94) 0.130 (3.30) (1) (2) 0.083 (2.11) 0.077 (1.96) MECHANICAL DATA Case: JEDEC SMB molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.003 ounce 0.093 gram 0.190 (4.75) 0.160 (4.06) 0.012 (0.305) 0.006 (0.152) 0.096 (2.44) 0.084 (2.13) 0.060 (1.52) 0.030 (0.76) 0.008 (0.203)(max) ) 0.220 (5.59) 0.205 (5.21) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SMB UNITS Volts Volts Volts Amps Amps pF o MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range SYMBOL VRRM VRMS VDC IO IFSM CJ R JA SBM17PT 70 49 70 SBM18PT 80 56 80 1.0 40 110 50 SBM19PT 90 63 90 SBM110PT 100 70 100 C/W o TJ,TSTG -65 to +150 C ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 1.0 A DC Maximum Average Reverse Current at Rated DC Blocking Voltage @ TA = 25oC IR @ TA = 100 C o SYMBOL VF SBM17PT 0.75 SBM18PT SBM19PT 0.80 0.5 10 SBM110PT UNITS Volts mAmps mAmps 2002-5 NOTES : 1. Thermal Resistance ( Junction to Lead ) : PC Board Mounted on 0.2X0.2" ( 5mm X 5mm ) copper pad area. 2. Measured at 1.0 MHZ and applied reverse voltage of 4.0 volts. RATING CHARACTERISTIC CURVES ( SBM17PT THRU SBM110PT ) INSTANTANEOUS FORWARD CURRENT, ( A ) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, (A) 1.0 FIG. 2 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 20 10 1PT SBM .75 SB 9PT M1 7~S BM1 .50 B ~S 10P M1 1.0 8PT .25 Single Half Wave 60HZ Resistive or Inductive Load T 0 0 25 50 75 100 125 o 150 175 0.1 TJ =25oC Pulse Width=300us 1% Duty Cycle .1 .3 .5 .7 .9 1.1 1.3 1.5 1.7 1.9 2.1 LEAD TEMPERATURE, ( C ) FIG. 3 - TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT, (mA) 10 INSTANTANEOUS FORWARD VOLTAGE,(V) FIG. 4 - MAXIMUM NON-REPETIVE FORWARD SURGE CURRENT 50 PEAK FORWARD SURGE CURRETN(A) 40 8.3ms Single Half Sine-Wave (JEDEC Method) 1.0 TJ = 150oC 30 .10 20 .01 TJ = 25oC 10 .001 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, ( % ) 0 1 2 4 6 8 10 20 40 80 100 NUMBER OF CYCLES AT 60 Hz FIG. 5 - TYPICAL JUNCTION CAPACITANCE 400 JUNCTION CAPACITANCE, ( pF ) 200 100 80 60 40 20 10 .1 .4 1.0 4 10 40 80 REVERSE VOLTAGE, ( V ) TJ = 25oC