SSM29APT

CHENMKO ENTERPRISE CO.,LTD SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 70 - 100 Volts CURRENT 2.0 Amperes FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * For surface mounted applications * Low profile package * Built-in strain relief * Metal silicon junction, majority carrier conduction * Low power loss, high efficiency * High current capability, low forward voltage drop * High surge capability * For use in low voltage high frequency inverters, free wheeling, and polarity protection applications * High temperature soldering guaranteed : 260oC/10 seconds at terminals S SM27APT THRU SSM210APT SMA-S + 0.2 2.6 - 0.2 + 0.2 1.4 - 0.2 + 0.2 3.5 - 0.2 + 0.02 0.5 - 0.02 MECHANICAL DATA Case: JEDEC SMA-S molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end 0.975 + 0.1 - 0.1 + 0.02 0.2 - 0.02 + 0.02 1.08 - 0.02 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. + 0.2 4.5 - 0.2 Dimensions in millimeters SMA-S MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range SYMBOL VRRM VRMS VDC IO SSM27APT 70 49 70 SSM28APT 80 56 80 2.0 SSM29APT 90 63 90 SSM210APT 100 70 100 UNITS Volts Volts Volts Amps IFSM CJ R JL 50 110 48 -65 to +150 Amps pF o C/W o TJ,TSTG C ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 2.0 A DC Maximum Average Reverse Current at Rated DC Blocking Voltage @ TA = 25oC IR @ TA = 100 C o SYMBOL VF SSM27APT 0.75 SSM28APT SSM29APT SSM210APT 0.80 UNITS Volts mAmps mAmps 2004-12 0.5 10 NOTES : 1. Thermal Resistance ( Junction to Lead ) : PC Board Mounted on 0.2 X 0.2" ( 5 X 5mm ) copper pad area. 2. Measured at 1.0 MHZ and applied reverse voltage of 4.0 volts. RATING CHARACTERISTIC CURVES ( SSM27APT THRU SSM210APT ) INSTANTANEOUS FORWARD CURRENT, ( A ) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, (A) 2.0 FIG. 2 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 20 10 1.5 SS 9AP M2 T~S PT 27A SSM ~SS 1.0 SSM27APT~28APT SSM29APT~210APT 1.0 APT M28 SM AP 210 0.5 Single Half Wave 60HZ Resistive or Inductive Load T 0 0 25 50 75 100 125 o 150 175 0.1 TJ =25oC Pulse Width=300us 1% Duty Cycle 0 0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 LEAD TEMPERATURE, ( C ) FIG. 3 - TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT, (mA) 10 INSTANTANEOUS FORWARD VOLTAGE,(V) FIG. 4 - MAXIMUM NON-REPETIVE FORWARD SURGE CURRENT 60 PEAK FORWARD SURGE CURRETN(A) 50 8.3ms Single Half Sine-Wave (JEDEC Method) 1.0 TJ = 150oC 40 30 .10 20 .01 TJ = 25 C o 10 .001 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, ( % ) 0 1 2 4 6 8 10 20 40 80 100 NUMBER OF CYCLES AT 60 Hz FIG. 5 - TYPICAL JUNCTION CAPACITANCE 400 JUNCTION CAPACITANCE, ( pF ) 200 100 80 60 40 20 10 .1 .4 1.0 4 10 40 80 REVERSE VOLTAGE, ( V ) TJ = 25oC