CU103601

THIN ANGULAR POSITION SENSOR AN8 Series Programmable, non-contact magnetic position Sensors capable of continuous rotation Features and Benefits  Angular position sensor with high tolerance for misalignment  Provides non-contact angular position sensing to full 360° rotation  No mechanical interface means no parts to wear out  Sealed design exceeds IEC529 IP67 standard for immersion  5VDC ratiometric device.  Performs with AS500106 standard magnetic carrier  Provided with EMI/ESD protection to SAE J1113 Description The sensor is operated by rotating a magnetic actuator close to the face of the sensor. Output voltage varies with angular position of the magnet relative to the sensor. Optimal performance is achieved with Cherry’s AS500106 magnetic actuator. Sensor kits including this standard magnet are available. Applications      Replacement for smart bearings PRNDL switch for harsh environments Steer wheel position for drive by wire systems Throttle position sensor Pedal position sensor Dimensions mm standards  Maximum operating temperature of 125ºC Custom Options (Contact factory for minimums and availability)  Linear output over specified angular rotation ranges  Sensor can be programmed for use with custom magnets  Custom programming option for rising or falling output slope with selectable offset, gain, clamp voltage  PWM output option available for custom applications ANGULAR POSITION SENSOR AN8 Series Mechanical Specifications Mechanical Travel Dither Mating Connector Maximum Air Gap Maximum Center-to-Center Offset 0 to 360 degrees (continuous) No mechanical contact Connector: Delphi Metri-pak 150.2 12162185 Terminal: 12124075/12047680 5mm 2mm (Magnet AS500106 to sensor) Electrical Specifications Sensing Range Input Voltage Output Voltage Output Accuracy (with supplied magnet) (65°- 360° rotation) Output Smoothness (with supplied magnet) (65°- 360° rotation) Output Linearity (with supplied magnet) (65°- 360° rotation) Max Supply Voltage Reverse Voltage Maximum Output Current Range Minimum Output Current Range Resolution Electrostatic Discharge Immunity to Radiated Electronic Magnetic Fields Conducted Transient Emissions Radiated Emissions Operating Temperature Conducted Immunity Conduction and Coupling 0 to 360 degrees of rotation 5.0 VDC ± 10% 0.5 to 4.5 VDC (ratiometric) ± 2.5% Full Scale ± 0.75% Full Scale for any 2% interval ± 2.0% Full Scale 16 VDC -10 VDC 8mA -8mA Analog SAE J1113-13; Consult factory for details SAE J1113-4; 1 MHz to 400 MHz SAE J1113-42; ± 25V SAE J1113-41; Class 3 -40 to 125°C SAE J1113-2; 30Hz to 250kHz SAE J1113-12; Consult factory for details Sensor Sensing Range Sensor/Magnet Assembly # AN820001 AN820002 AN820003 180° 360° 45° CU103601* CU103602* CU103603* *Includes AN8 sensor and AS500106 magnetic actuator Contact Call, fax or visit our website For more information. ZF Electronics Corporation 11200 88th Avenue Pleasant Prairie, WI 53158 Specifications subject to change without notice. Phone: Web: 262.942.6500 www.cherrycorp.com E-Mail: Fax: cep_sales@zf.com 262.942.6566 © 2008 ZF Electronics Corporation Revised 020613