D449-R1AA-G2

D4 MINIATURE SWITCH Terminals Q.C. terminal 6.3 x 0.8 mm straight V1 Q.C. terminal 6.3 x 0.8 mm dog leg V3 13.3 10 Solder terminal, short B8 Solder terminal with temperature-stop S1 6.6 3.4 Ø 2 Ø 13.2 15° 15.1 3.25 2.7 4.6 5° 7.15 D4 miniature switch Versatile miniature snap action microswitch. A wide able as standard and the switch fulfils the requirements of PCB terminal 1.3 x 0.8 mm cover side PB PCB terminal 1.3 x 0.8 mm housing side PA Q.C. terminal 4.8 x 0.8 mm dog leg Q3 Q.C. terminal 4.8 x 0.8 mm straight Q1 variety of auxiliary actuators and terminal options are avail- 3.5 2.9 IEC 603351: GWFI at 850°C, GWIT at 775°C and GWT 750°C. ∙ High proof tracking index PTI 600 2.15 ∙ High level of repeat accuracy ∙ High contact stability through application-specific contact materials up to a switching current of 0.1 to 21 A at 250 V AC Q.C. terminal 4.8 x 0.5 mm dog leg R3 Q.C. terminal RAST 2.5 X5 ∙ Ambient temperature – 40 to + 150°C Connector housing for Q.C. terminal 6.3 x 0.8 mm, RAST 5 3.3 ∙ Approved according to IEC 61058-1 / UL 61058-1 PCB terminal 1.3 x 0.5 mm, underside P4 19.5 Circuitry 40T85 S.P.D.T., S.P.S.T. - N.O., S.P.S.T. - N.C. Standard operating force Contact gap < 3 mm (μ) S.P.S.T. - N.O. Switching voltage 250 V AC S.P.S.T. - N.C. 2 Switching current < 0.1 to 21 A, depending on model S.P.D.T. 3 Total travel 2.6 mm Light operating force Code Mechanical life see table on page 12 S.P.S.T. - N.O. 7 Electrical life see table on page 12 S.P.S.T. - N.C. 8 Ambient temperature 40T85; 40T125; 40T150 S.P.D.T. 9 Proof tracking index PTI 300 (PET)/PTI 600 (PA6) Code N Terminals CuZn, alternative Cu S.P.S.T. - N.C. P Auxiliary actuator Nickel-plated steel, alternative stainless steel S.P.D.T. R Circuitry 40T150* Code 4.3 B Dimensions in mm IP40 Light operating force S.P.S.T. - N.O. S S.P.S.T. - N.C. T S.P.D.T. U 1.8 20 4.4 5 5.6 S.P.S.T. - N.O. SP RS 19.5 1.8 7.8 5.75 Code 5.65 Light operating force 7.65 4.3 M 1.8 20 5.6 H S.P.D.T. G 4.4 S.P.S.T. - N.C. Degree of protection Switch interior 1.6 10.3 4.1 S.P.S.T. - N.O. POM (max. 85°C) alternative PET (UL 94V-0) 13.1 10.3 A PET/PA6 (UL 94V-0) Actuator Approvals 2.8 7.8 2.8 Housing/cover AuAgPt (Crosspoint) Ag AgNi Drilling patterns for PCB terminals 27.8 22.2 20.25 max. 16.2 14.7 ± 0.5 Code Standard operating force D41 D42 D43 – D48 14 1 Other terminals available on request. A Circuitry 40T125 Contact materials Q.C. terminal 6.3 x 0.8 mm RAST 5 Y5 5.6 D4 ❶ Contact configuration 5 5 Series Materials 5 2.5 Circuitry ❸ Technical specifications Mounting holes Hole dimensions Measurement „A“ Measurement „B“ 3.1 ± 0.15 mm 3.3 ± 0.15 mm * Not for D48 For detailed information please note the technical specifications which you can find in the download section of our website www.switches-sensors.zf.com. 2.2 D4 MINIATURE SWITCH CONTINUED Electrical rating and operating life ❷ Terminal type ❹ Electrical rating according to*** Electrical life for 40T85* (operations) Mechanical lifetime actuator material Operating force Housing mark Code EN/UL 61058-1 acc. to EN/UL POM PET max. (cN) 0.1 (0.05) A, 250 V AC 50,000 10 x 106 1 x 106 170 D4 1 Y 1 3 (1) A, 250 V AC 50,000 10 x 106 1 x 106 170 D4 2 Y 2 6 (2) A, 250 V AC 50,000 5 x 106 25 x 104 170 D4 3 Y 3 10 (3) A, 250 V AC 50,000 1 x 106 1 x 105 285 D4 4 Y 4 16 (4) A, 250 V AC 50,000 2 x 105 1 x 105 400 D4 5 Y 5 Standard operating force Light operating force 0.1 (0.05) A, 250 V AC 50,000 10 x 106 1 x 106 45** D4 1 X 1 3 (1) A, 250 V AC 50,000 10 x 106 1 x 106 45** D4 2 X 2 6 (2) A, 250 V AC 50,000 6 10 x 10 5 x 10 5 45 D4 3 X 3 10 (3) A, 250 V AC 50,000 10 x 106 25 x 104 75 D4 4 X 4 16 (4) A, 250 V AC 50,000 10 x 106 25 x 104 100 D4 5 X 5 21 (8) A, 250 V AC 10,000 3 x 106 25 x 104 150 D4 8 X 8 Auxiliary actuator ❺ Terminal type Code Q.C. terminal 6.3 x 0.8 mm, straight V1 V3 Without auxiliary actuator AA Q.C. terminal 6.3 x 0.8 mm, dog leg Q.C. terminal 6.3 x 0.8 mm, RAST 5 Y5 Material Q.C. terminal RAST 2.5 X5 NickelOptional plated steel stainless steel Q.C. terminal 4.8 x 0.8 mm, straight* Q1 Q.C. terminal 4.8 x 0.8 mm, dog leg* Q3 Q.C. terminal 4.8 x 0.5 mm, straight** R1 Solder terminal short* B8 Solder terminal with temperature-stop S1 Welding terminal A1 PCB terminal 1.3 x 0.8 mm, housing side* PA PCB terminal 1.3 x 0.8 mm, cover side* PB PCB terminal 1.3 x 0.5 mm, underside* P4 * Not for D48 ** D45 and D48 not with VDE approval, only UL1054 Type Mounting point Straight RM rear FM front Roller RM rear FM front Simulated roller RM rear FM front Length Code 21.2 35.6 69.9 25.7 40.1 74.4 LA LD LL MA MD ML 20.6 34.1 25.1 38.6 RA RD TA TD 20.6 25.1 SA UA Code JA JD JL KA KD KL Generation of order code (example) The order code consists of 5 parameters: * Operating life 40T125 and 40T150 on request ** Lower operating forces on request *** Additional electrical ratings according to UL 1054 on request ❶ ❷ ❸ ❹ ❺ Series Electrical rating Circuitry Terminal type Auxiliary actuator D4 5 9 V3 AA = Miniature switch = 16 (4) A, 250 V AC = S.P.D.T. = Q.C. terminal, dog leg, 6.3 x 0.8 mm = without auxiliary actuator • Not every configurable variant is available for order. Please contact us. • The final two digits of article numbers on commercial documents refer to the index of the respective drawing. • Customer-specific models are marked with a G or W as the sixth digit of the article number. Switching parameters Model Type Max. operating force (cN) Standard Light Max. pretravel (mm) Min. overtravel (mm) Differential travel max. (mm) Max. rest position (mm) Operating point (mm) Without auxiliary actuator D41 D42 D43 D44 D45 D48 170 170 170 285 400 – 1.2 1.2 1.2 1.2 1.2 1.6 1.3 1.3 1.3 1.3 1.3 1.2 0.3 0.3 0.3 0.3 0.3 0.3 16.2 16.2 16.2 16.2 16.2 16.2 14.7 14.7 14.7 14.7 14.7 14.7 0.5 0.5 0.5 0.5 0.5 0.5 AA Length of auxiliary actuator Rear mounting point (RM) 9 Front mounting point (FM) 13.5 Straight Roller 10.55 Auxiliary actuator 45 45 45 75 100 150 Code Simulated roller For detailed information please note the technical specifications which you can find in the download section of our website www.switches-sensors.zf.com.