DB3C-A1AA

DB SUBMINIATURE SWITCH Terminals 3.2 Ø 1.875 Ø 1.35 PCB terminal, straight 0.6 x 0.5 mm 3.5 3.1 PCB terminal, straight 1.3 x 0.5 mm 1.25 2.8 Side definition with terminals and location pins 3.1 3.1 Solder terminal, short 7.3 Q.C. terminal 2.8 x 0.5 mm 0.6 2.8 LH side DB subminiature switch PCB terminal 0.6 x 0.5 mm LH side w/o location pins PCB terminal 0.6 x 0.5 mm RH side w/o location pins Precision subminiature switch with high repeat accuracy, available up to an operating temperature of 120°C ∙ Nominal current up to 10 A at 250 V AC PCB terminal 0.6 x 0.5 mm RH side with location pins 2.8 RH side PCB terminal 0.6 x 0.5 mm LH side with location pins 2.8 ∙ High contact stability due to specific contact materials 3.5 ∙ Mechanical life up to 15 × 106 actuations 3.5 6.75 5.08 5.08 ∙ Actuators can also be retrofitted, two mounting points 5.08 5.08 ∙ A wide variety of auxiliary actuators available 3.5 6.75 3.5 6.75 6.75 ∙ Wide variety of terminal types Steel auxiliary actuator Auxiliary plastic actuator with/without adjusting screw »L« ± 0.8 »L« ± 0.8 S.P.S.T. - N.O. E Contact gap < 3 mm (μ) S.P.S.T. - N.C. F Switching voltage 250 V AC S.P.D.T. G Switching current 0.1 to 10 A AC, depending on model (see table on page 19) Operating temperature +120°C Code B Total travel 1.6 mm S.P.D.T. C Mechanical life see table on page 18 Electrical life see table on page 18 Ambient temperature – 40 to +85°C/120°C Proof tracking index PTI 175 (PTI 250 on request) max. 20 7.5 Approvals depending on model IP50 ❷ ❸ ❹ ❺ Electrical rating Circuitry Terminal type Auxiliary actuator DB 1 C A1 LB = subminiature switch = 6 A, 250 V AC = S.P.D.T. = Solder terminal short = Lever straight, RM rear 4.8 • Not every configurable variant is available for order. Please contact us. • The final two digits of article numbers on commercial documents refer to the index of the respective drawing. • Customer-specific models are marked with a G or W as the sixth digit of the article number. 2.73 2.55 7.5 7.5 9.5 5.2 7.5 Drilling pattern for PCB terminal 0.6 x 0.5 mm lateral with location pins 2 ❶ Series 7.5 7.5 6.45 Ø 1.7 9.5 2.73 Ø 1.3 5.08 Stainless steel or plastic 6.7 CuZn silver-plated Generation of order code (example) The order code consists of 5 parameters: Ø 1.3 7.30 Terminals 7.5 2.35 AgSnO2, AgNi, AuAgPt (Crosspoint) Drilling pattern for PCB terminal 0.6 x 0.5 mm straight/lateral Ø 1.6 7 Contacts Roller Ø 2.20 2.25 PBT (UL 94V-0) T120 POM (UL 94 HB) T85 min. 7.5 Actuator Simulated roller Drilling pattern for PCB terminal 1.3 x 0.5 mm Operating point End position max. 9.3 PBT (UL 94V-0); PET (UL 94V-0) Ø5 Drilling patterns Rest position 8.4 ± 0.3 Cover »L« ± 0.8 Simulated roller Materials PET (UL 94V-0) R 2.5 R2 2.9 S.P.S.T. - N.C. »L« ± 0.8 Straight »L« ± 0.8 5.6 70 to 280 cN without auxiliary actuator, depending on model Ø 4.8 Roller A Operating voltage Base Straight »L« ± 0.8 3.5 S.P.S.T. - N.O. Front mounting pivots Rear mounting pivots 3.5 Code S.P.D.T., S.P.S.T. - N.O., S.P.S.T. - N.C. 3.3 Operating temperature +85°C Contact configuration 5.5 DB ❶ 3.5 Series Degree of protection Switch interior 3.5 Circuitry ❸ Technical specifications Auxiliary actuator 3.5 SP RS Front mounting pivots Rear mounting pivots 7.5 7.5 Dimensions in mm For detailed information please note the technical specifications which you can find in the download section of our website www.switches-sensors.zf.com. DB SUBMINIATURE SWITCH CONTINUED Terminal type ❹ Electrical rating and operating life ❷ Electrical rating according to Electrical life (operations) Mechanical life Operating force Housing mark Code max. (cN) Auxiliary actuator ❺ Terminal type Code Q.C. terminal 2.8 x 0.5 mm, straight B1 Model Mounting point Length Order code* Code Solder terminal short A1 Without lever, spherical head – – – AA PCB terminal 1.3 x 0.5 mm, straight C1 PCB terminal 0.6 x 0.5 mm, straight Without lever, radius shape – – – BA D1 Straight RM rear 4.8 7 42 7 9.4 43.5 614-01232 614-01233 614-01234 614-01232 614-01233 614-01234 LB LC LD MB MC MD 2.5 4.7 39.7 4.7 7.1 41.2 714-00260 714-00261 714-00262 714-00260 714-00261 714-00262 RB RC RD TB TC TD 2.5 4.7 39.7 4.7 7.1 41.2 614-01237 614-01238 614-01239 614-01237 614-01238 614-01239 SB SC SD UB UC UD 7 14 9.4 16.2 614-01247 614-01253 614-01247 614-01253 WB WC GB GC EN 61058-1 UL 1054 acc. to EN acc. to UL 6 A 250 V AC 5 A 125 – 250 V AC 10,000 6,000 15 x 106 150 DB 1 1 10 (1.5) A, 250 V AC 10.1 A, 125 – 250 AC, 1/4 HP, 125 V AC 10,000 6,000 10 x 106 250 DB 2 2 0.1 A, 250 V AC 0.1 A 125–250 V AC 50,000 100,000 15 x 106 150 DB 3 3 PCB terminal 0.6 x 0.5 mm, RH side* D2 D3 6 90 DB 4 4 PCB terminal 0.6 x 0.5 mm, LH side* 70 DB 5* 5* PCB terminal 0.6 x 0.5 mm, RH side** D4 PCB terminal 0.6 x 0.5 mm, LH side** D5 4 A, 250 V AC 4 A, 125 – 250 V AC 50,000 6,000 15 x 10 1 A, 250 V AC 1 A, 125 – 250 V AC 50,000 6,000 15 x 106 10 (3) A, 250 V AC 10.1 A, 125 – 250 V AC, 10,000 1/4 HP, 125 V AC 6,000 10 x 106 280 DB L L 6 (2) A, 250 V AC 5 A, 125 – 250 V AC 6,000 15 x 106 150 DB O O 50,000 Special versions with lower ratings upon request * With location pins ** Without location pins FM front Roller * Only T85 RM rear FM front Electrical rating at DC voltage Please see our technical specification for DC currents (TS-0002) which is available upon request. Switching parameters Model Type Max. operating force (cN) Max. pretravel (mm) Min. overtravel (mm) Differential travel max. (mm) Max. rest position (mm) Operating point (mm) Spherical-head actuator or actuator with radius, without auxiliary actuator DB5 DB1/O/3 DBL DB2 DB4 70 150 280 250 90 1.0 1.0 1.0 1.0 1.0 0.6 0.6 0.6 0.6 0.6 0.1 0.1 0.15 0.1 0.1 9.3 9.3 9.3 9.3 9.3 8.4 8.4 8.4 8.4 8.4 0.3 0.3 0.3 0.3 0.3 Length actuator (mm) ± 0.8 – – – – – Simulated roller RM rear FM front Plastic, straight RM rear FM front Plastic roller RM rear FM front 5.2 7.3 714-00299 714-00299 ZB OB Plastic simulated roller RM rear FM front 5.6 7.9 614-01249 614-01249 VB HB * For retrofitting For detailed information please note the technical specifications which you can find in the download section of our website www.switches-sensors.zf.com.