DC1C-A1AA

DC SUBMINIATURE SWITCH Electrical rating and operating life ❷ Electrical rating according to DC subminiature switch Electrical life at rated load (operations) Mechanical life Operating force Housing mark Code EN 61058-1 UL 1054 acc. to EN acc. to UL 6 A 250 V AC 5 A 125 – 250 V AC 10,000 6,000 1 x 106 max. (cN) 200 DC 1 1 10 (1.5) A, 250 V AC 10.1 A, 125 – 250 V AC 10,000 1/4 HP, 125 V AC 6,000 1 x 106 340 DC 2 2 0.1 A, 250 V AC 0.1 A 125 – 250 V AC 50,000 100,000 1 x 106 200 DC 3 3 3 A, 250 V AC 3 A, 125 – 250 V AC 50,000 6,000 1 x 106 200 DC 4* 4* * only possible as line version with line diameter 0.5 mm2 and AWG 22 Sealed switch IP67 protection ∙ Models available for 120°C operating temperature Auxiliary actuator ❺ ∙ Nominal currents from 10A at 250 V AC Model Length Code ∙ Various auxiliary actuators available Without lever – AA (can also be retrofitted) Straight ∙ Various application-specific contact materials ∙ Mechanical operating life min. 1,000,000 operations ∙ Various terminal types available Roller Simulated roller Circuitry ❸ Technical specifications 4.8 LB 8 LC 42 LD 2.5 RB 4.7 RC 39.7 RD 2.5 SB Series DC ❶ Operating temperature +85°C Code 4.7 SC Contact configuration S.P.D.T., S.P.S.T. - N.O., S.P.S.T. - N.C. S.P.S.T. - N.O. E 39.7 SD Contact gap < 3 mm (μ) S.P.S.T. - N.C. F Plastic, straight 7 WB Switching voltage (max.) 250 V AC S.P.D.T. G 14 WC Switching current 0.1 to 10 A AC (see table on page 24) depending on model Operating temperature 120°C (with leads 105°C) Plastic roller 5.2 ZB S.P.S.T. - N.O. A Plastic simulated roller 5.6 VB Operating voltage 200 to 340 cN without auxiliary actuator, depending on model S.P.S.T. - N.C. B Total travel Approx. 1.6 mm S.P.D.T. C Mechanical life (see table on page 23) Terminal type ❹ Electrical life (see table on page 23) Model Code Ambient temperature – 40 to + 85°C/120°C Solder terminal short* A1 Model with leads – 40 to + 105°C PCB terminal 1.3 x 0.5 mm, straight* H1 Proof tracking index PTI175, PTI250 on request PCB terminal 0.6 x 0.5 mm, straight* K1 PCB terminal 0.6 x 0.5 mm RH side** K8 PCB terminal 0.6 x 0.5 mm LH side** K9 PCB terminal 0.6 x 0.5 mm RH side*** K6 Materials Cover PBT (UL 94V-0), PET (UL 94V-0) Actuator POM UL 94 HB (T85), PBT UL 94 V-0 (T120) PCB terminal 0.6 x 0.5 mm LH side*** K7 Base PET (UL 94V-0) Q.C. terminal 2.8 x 0.5 mm, straight* L1 Contacts AgNi/AuAgPt (Crosspoint) Leads 0.5 mm2, routed downwards B5 Terminals CuZn silver-plated Leads 0.5 mm2, with leads B3 Auxiliary actuator Stainless steel or Plastic Leads 0.5 mm2, on side opposite actuator B4 Sealing gasket VMQ Leads 0.75 mm2, routed downwards C5 Cu, PVC-sheated Leads 0.75 mm2, with leads C3 Leads 0.75 mm2, on side opposite actuator C4 Without leads (Form B), on side opposite actuator/ on actuator side* N3/N4 Without leads (Form A), on side opposite actuator/ on actuator side* P3/P4 Without leads (no cut-out), with solder terminal* Q5 Leads Approvals depending on model Degree of protection Switch interior IP67 * Max. 30° twisted ** with location pin Generation of order code (example) The order code consists of 5 parameters: ❶ ❷ ❸ ❹ ❺ Series Electrical rating Circuitry Terminal type Auxiliary actuator DC 1 C A1 LB = subminiature switch = 6 A, 250 V AC = S.P.D.T. = Solder terminal short = Lever straight, 4.8 • Not every configurable variant is available for order. Please contact us. • The final two digits of article numbers on commercial documents refer to the index of the respective drawing. • Customer-specific models are marked with a G or W as the sixth digit of the article number. *** W/o location pin For detailed information please note the technical specifications which you can find in the download section of our website www.switches-sensors.zf.com. DC SUBMINIATURE SWITCH CONTINUED Rest position Operating point End position max. 20 7.5 DC1, 3, 4 200 DC2 340 Max. pretravel (mm) Min. overtravel (mm) Differential travel max. (mm) Max. rest position (mm) Operating point (mm) Length actuator 1.0 1.0 0.6 0.6 0.1 0.1 9.3 9.3 8.4 0.3 8.4 0.3 – 6.7 2.73 2.54 7.5 6.45 7.5 5.16 9.5 Dimensions in mm Auxiliary actuator Electrical rating at DC voltage Steel auxiliary actuator Please see our technical specification for DC currents (TS-0002) which is available upon request. Plastic auxiliary actuator with/without adjusting screw »L« ± 0.8 Terminals PCB terminal 0.6 x 0.5 mm max. 30° twisted R 2.5 »L« ± 0.8 Ø 4.8 Straight Straight 3.5 6.7 6.7 »L« ± 0.8 »L« ± 0.8 R2 »L« ± 0.8 Ø5 7.3 1.35 3.5 PCB terminal 1.3 x 0.5 mm max. 30° twisted 3.5 Q.C. terminal 2.8 x 0.5 mm max. 30° twisted 3.35 Solder terminal short max. 30° twisted 3.5 SP RS »L« ± 0.8 Ø 1.875 Simulated roller 5.6 3.3 ≤ 5.5 Simulated roller 2.9 Without auxiliary actuator Max. operating force (cN) 2.35 Type max. 7.7 6.95 Switching parameters Model Ø 2.20 2.3 min. 7.7 max. 9.3 8.4 ± 0.3 4.85 PCB terminal 0.6 x 0.5 mm LH side w/o location pins Model with connecting leads (IP67) 5.08 Rest position Operating point End position 7.5 3.5 6.75 NC lead, grey COM lead black Side definition with terminals and location pins Drilling pattern for PCB terminal 1.3 x 0.5 mm Drilling pattern for PCB terminal 0.6 x 0.5 mm, straight/lateral 6.7 NO lead, blue Drilling pattern for PCB terminal 0.6 x 0.5 mm, lateral with location pins 2.54 9.5 min. 500 LH side Ø 2.15 Ø 1.3 RH side 7.5 7.5 Dimensions in mm 7.5 7.5 9.53 2.73 Ø 1.3 5.08 Ø 1.6 7.5 max. 7.7 Ø 2.175 max. 8,5 3.5 6.75 3.5 6.75 2.3 3.5 6.75 5.08 3 5.08 5.08 3 Roller Roller 6.95 PCB terminal 0.6 x 0.5 mm LH side w/o location pins min. 7.7 PCB terminal 0.6 x 0.5 mm RH side with location pin max. 9.3 8,4 ± 0.3 PCB terminal 0.6 x 0.5 mm RH side w/o location pin 5.16 max. 20 Leads attached on actuator side min. 500 Leads attached on side opposite actuator Form A Form B 7.5 Special model with tall base available on request For detailed information please note the technical specifications which you can find in the download section of our website www.switches-sensors.zf.com.