DG23-B1AA

DG SUB-SUBMINIATURE SWITCH Electrical rating and operating life ❷ Electrical rating according to UL and CSA Operating life Nominal load UL and CSA mechanical Code 3 A, 125 V AC 2 A, 30 V DC 6,000 1 x 106 1 0.05 A, 30 V DC 6,000 1 x 106 2 Auxiliary actuator ❺ Extremely small dimensions – only 12.8 × 5.8 × 6.5 mm. Model Type Operating force max.(cN) Max. pretravel (mm) Min. overtravel (mm) Differential travel max. (mm) Max. rest position (mm) Operating point (mm) Breaking capacity ranges from small switching Without auxiliary actuator DG 1.2 B DG 2 C 140 75 0.5 0.5 0.2 0.2 0.1 0.1 5.9 5.9 5.4 ± 0.2 5.4 ± 0.2 AA Auxiliary actuator, straight DG 1.2 B DG 2 C 45 30 1.8 1.8 0.55 0.55 0.5 0.5 9.4 9.4 6.8 + 0.8/-0.4 6.8 + 0.8/-0.4 LA Auxiliary actuator roller DG 1.2 B DG 2 C 60 35 1.5 1.5 0.55 0.55 0.5 0.5 13.9 13.9 12.4 ± 0.5 12.4 ± 0.5 RA DG sub-subminiature switch currents and voltages to low-voltage applications up to 3 A 125 V AC. ∙ Available with or without auxiliary actuator ∙ Use on circuit boards with connections to the left Code or right and standing ∙ High mechanical operating life, depending on model > 1,000.000 operations Terminals Solder terminal PCB terminal RH side PCB terminal LH side Drilling pattern Code S.P.D.T. 3 Contact gap < 3 mm Switching voltage max. 125 V AC Terminal type ❺ Switching current max. 3 A AC Model Code Solder terminal, straight B1 Operating voltage max. 75 cN oder 140 cN without auxiliary actuator PCB terminal, RH side B2 Total travel 0.7 mm without auxiliary actuator PCB terminal, LH side B3 3.1 Dimensions in mm 1.2 + 0.1 3.1 1.8 Model S.P.D.T. 1.8 DG ❶ Contact configuration 0.6 Series 0.6 0.6 0.9 Circuitry ❸ Technical specifications 0.9 0.9 3.5 5.08 5.08 Auxiliary actuator 4.35 1.4 > 1 x 10 operations Electrical life (max. load) see table on page 35 Ambient temperature – 25°C to + 85°C RS SP Mechanical life RS SP 6 Dimensions in mm Materials Stainless steel Terminals CuZn striped silver-plated Contacts DG 1 DG 2 AgNi AgNi, gal. Au Approvals Degree of protection Switch interior IP40 ❶ ❷ ❸ ❹ ❺ Series Electrical rating Circuitry Terminal type Auxiliary actuator DG 1 3 B1 AA = sub-subminiature switch = 3 A, 125 V AC = S.P.D.T. = PCB terminal, straight = without auxiliary actuator 2 A, 30 V DC 2.8 12.8 Generation of order code (example) The order code consists of 5 parameters: • Not every configurable variant is available for order. Please contact us. • The final two digits of article numbers on commercial documents refer to the index of the respective drawing. 2 Auxiliary actuator Rest position Operating point 5 PBT (UL 94V-0) 1.5 PBT (UL 94V-0) Actuator max. 5.9 PPS (UL 94V-0) Cover 5.4 ± 0.2 Base 2 2,2 5.8 6.5 5.08 5.08 Dimensions in mm For detailed information please note the technical specifications which you can find in the download section of our website www.switches-sensors.zf.com.