DR1R-BNA0

SNAP SWITCHES DR sub-subminiature switch Technical specifications Features Contact configuration S.P.D.T.  Switch with mushroom or pan-head actuator for many actuation possibilities Contact gap < 3 mm  Dustproof according to IP40 Switching voltage max. 12 V DC, to 60 V on request  Models available up to 105 °C operating temperature Switched current 0,005 to 2 A DC  Nominal currents 5 mA up to 2 A at 12 V DC Operating force max. 75 cN without auxiliary actuator  Auxiliary actuator on request Total travel ca. 2,0 mm Mechanical life min. 1 x 106 operations Electrical life (max. load) min. 100.000 operations Ambient temperature – 40 to +85 °C / 105 °C Materials Base PBT Cover PBT Actuator PES Auxiliary actuator Stainless steel Terminals CuZn (silver-plated) Contacts AuAg (Crosspoint) Degree of protection (switch interior) IP40 For detailed information and the layout of the details described above, please do not hesitate to ask for our technical specifications and drawing. 50  High contact stability thanks to AuAg crosspoint contacts  Mechanical operating life min. 1 x 106 actuations  Various connection possibilities Dimensions in mm with mushroom actuator with pan-head actuator Rest position max. 5,0 Rest position max. 4,2 Operating point 4,3 ±0,2 End position min. 2,95 Operating point 3,5 ±0,2 End position min. 2,15 Terminals Solder terminal 2,5 x 0,5 mm PCB terminal 0,6 x 0,5 mm Side definition LH-side PCB terminal 0,6 x 0,5 mm RH-side with location pins PCB terminal 0,6 x 0,5 mm LH-side with location pins Drilling pattern for PCB terminals 0,6 x 0,5 mm, side and underside RH-side 51