GS101205

GEARTOOTH SPEED SENSOR GS101205 Series Flange mount gear sensor rated to 150°C Features and Benefits Capable of operating up to 150ºC   Sealed design exceeds IEC60529 IP67 standard for immersion    Resistant to fuels, solvents, and lubricants associated with engines, transmissions, brakes and chassis systems  Operates at arbitrarily low speeds Mating connector Delphi 12162280 Applications Easily customizable connector orientation  ESD resistant to 15kV (contact discharge)  Transmission speed  Wheel speed  Engine speed  Anti-lock braking systems Dimensions inches (mm) LASER MARK LOCATION 0.10 (2.5) 1.11 (28.2) 0.14 (3.5) MEXICO XXXX XXXX VCC OUTPUT GROUND 90° 0.84 (21.3) 0.49 (12.5) Ø 0.61 (15.6) 0.25 (6.3) 2.38 (60.5) Ø 0.91 (23) Ø 0.64 (16.2) 1.24 ±0.01 (31.55 ±0.2) 0.10 (2.5) Ø 0.26 (6.5) 0.67 (17) Ø 0.75 (18.9) 1.43 (36.3) Open Collector Sinking Block Diagram Recommended external pull-up resistor: Volts (DC) 5 9 12 15 Ohms 1000 1800 2400 3000 Magnet VCC (brown) Pull-up Resistor 4 Output (black) 3 Ground (blue) 1 GEARTOOTH SPEED SENSOR GS101205 Series Mechanical Specifications Airgap Max Installation Torque 1.5 mm (with Cherry test gear) 50 in-lbs (for a 1/4 - 20 bolt or M6 X 1) Electrical Specifications Operating Voltage Range Supply Current Output Saturation Voltage Output Current Operating Temperature Storage Temperature Range Output Risetime Output Falltime Bulk Current Injection Conduction and Coupling Electronic Discharge Radiated Immunity Immunity to Magnetic Fields Radiated Emissions Immunity to AC Fields Radiated Emissions Maximum Speed 5–30 VDC 6 mA max 600 mV max 25 mA max -40° to 150ºC* -55° to 150ºC 10µS 10µS SAE J1113-4 (250klHz to 500MHz; 100mA/m) SAE J1113-12 (±200V) SAE J1113-13 (±15kV) SAE J1113-21 (10kHz to 18GHz; 200 V/m) SAE J1113-22 (600microT AC Field; 5Hz to 2kHz; .2mT & 1mT DC Field) SAE J1113-23 SAE J1113-25 (15kV/m) SAE J1113-41 (Class 4) 10kHz (with Cherry target) *For continuous operation at 150°C supply voltage should be limited to 5.5V max. Environmental Specifications Water Immersion Dust, Sand and Gravel Bombardment Vibration Mechanical Shock Tooth Height Tooth Spacing Tooth Thickness Sensing Gap Tooth Width Specifications subject to change without notice. IEC60529 IP67 SAE J400 JUN80 Sinusoidal vibration max 15g’s from 40 to 2000 Hz 18 shocks at 50g’s 11ms per Mil Std 202F For best results, we recommend targets made from low carbon cold rolled steel. Other factors that influence sensor performance include geartooth height and width, space between teeth, shape of the teeth and thickness of the target. As a general guideline, consider a target with the following minimum parameters: Tooth Height Tooth Width Distance Between Teeth Target Thickness .200" .100" .400" .250" Contact Call, fax or visit our website for more information. Cherry Electrical Products 11200 88th Avenue Pleasant Prairie, WI 53158 Phone: Fax: Web: e-mail: 800 285 0773 • 262 942 6500 262 942 6566 www.cherrycorp.com cep_sales@cherrycorp.com © 2007 Cherry Corporation