CSLO-N34STG1-QA0R

CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LO-N34STG1-QAOR A Rev. PRODUCT SPECIFICATION LED Type Emitting Color Stopper LED Package : Oval LED Lamp Green 110° /40° Viewing Angle CUSTOMER APPROVED SIGNATURES APPROVED BY CHINA SEMICONDUCTOR CORPORATION Address:2FL. NO.909,Chung-Cheng Road, Chung-Ho City Taipei Hsien,Taiwan. Tel:886-2-2223-9696 Fax:886-2-2223-9377 http://www.csctw.com.tw ： ： ： ： ： ： Model No CSLO-N34STG1-QA0R Descriptions: : Superbright Lamp ■ ■ ■ ■ ■ CHECKED BY PREPARED BY OPTO PLUS TECHNOLOGIES CO.,LTD Address:696 Shun jiang Rd.,Ji Shan St.Shaoxing, ZheJiang,China Tel:86-0575-88623888 Fax:86-0575-88623112 CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LO-N34STG1-QAOR A Rev. Features 1. Low Power Consumption. 2. High Luminous Output 3. High Reliability and Solid Performance 4. Optimal Optical/Mechanical Design 5. Rohs Compliant Device Selection Guide Chip CSLO-N34STG1-QA0R Package Outline Dimensions - ： ： ： Tolerance ： ： ： ： Model No CSLO-N34STG1-QA0R ＊ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Part No. Material InGaN Emitted Color Green LED Lens Green Diffused ± 0.01 0.25 Unit ± inch mm http://www.csctw.com.tw Page 1/6 CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LO-N34STG1-QAOR Rev. A Absolute Maximum Rating (Ta=25 ) Parameter Power Dissipation Forward Current (DC) Peak Forward Current * Reverse Voltage Operating Temp. Storage Temp. Symbol Pd IF IFP VR Topr Tstg Tsol 1/10 Rating 114 30 100 5 -30 ~ +85 -40 ~ +100 Unit mW mA mA V Lead Soldering Temperature Max. 260 for 5 sec Max. (3mm from the epoxy bulb) Electro-optical Characteristics (Ta=25 ) Parameter Forward Voltage Luminous Intensity Dominant Wavelength Peak Wavelength Spectral Half Width Symbol VF IV λd λp ∆λ1/2 Min. ----1500 515 ------------- Typ. 3.2 2000 525 518 30 110(X) 40(Y) ----- Max. 3.8 4200 535 ------------- Unit V mcd nm nm nm Condition IF=20mA Viewing Angle ： http://www.csctw.com.tw μ Reverse Current θ θ θ θ 2 1/2 ------------50 deg IR A VR=5V Page ℃ ≦ ≦ * Pulse width 0.1 msec. duty ℃ ℃ ℃ ℃ ℃ ℃ ℃ ： ： ： ： Model No CSLO-N34STG1-QA0R ■ ■ ■ ■ ■ ■ ■ ■ 2/6 CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LO-N34STG1-QAOR A Rev. Luminous Intensity Rank Limits ( IF = 20mA ) unit mcd Part No. CSLO-N34STG1-QA0R Code R S T U min. 1500 1900 2500 3200 Color Rank Limits ( IF = 20mA ) unit nm Part No. Code CSLO-N34STG1-QA0R 1 2 3 4 min. 515 520 525 530 max. 520 525 530 535 Notes: 1. Tolerance of measurement of luminous intensity :±15 2. Tolerance of measurement of Color Coordinates :±0.01 3. Tolerance of measurement of forward voltage :±0.05v 4. All data are measured by CSC's test equipment. 5. One delivery will include several color rank, VF rank and Iv ranks of the products. 6. The quantity-ratio of the ranks is decided by CSC. 7. Please confirm with CSC salesman,if your request different form standard specification. ： http://www.csctw.com.tw ％ ： ： ： ： ： ： Model No CSLO-N34STG1-QA0R ■ ■ ■ ■ ■ ■ ■ ■ max. 1900 2500 3200 4200 Page 3/6 CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LO-N34STG1-QAOR Rev. A Typical Electrical / Optical Charateristics Curves (Ta = 25 Unless Otherwise Noted) Forward Current vs.Forward Voltage 30 IF - Forward Current - mA 25 20 15 10 5 0 0 TA=25°C Relative Intensity (Normalized at 20mA) Forward Current vs.Ambient Temperature 40 IF - Forward Current - mA 30 Relative Intensity 20 10 0 0 20 40 60 80 100 TA - Ambient Temperature -°C Forward Current vs.Chromaticity Coordinate 0.80 TA=25° C 0.78 0.76 y 0.74 30mA-524nm 0.72 0.70 0.12 0.14 0% ： ℃ ℃ ℃ ℃ ： ： ： ： Model No CSLO-N34STG1-QA0R ■ ■ ■ ■ Relative Intensity vs.Forward Current 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 DC Forward Current - mA TA=25° C 1.0 2.0 3.0 4.0 VF - Forward Voltage - V Relative Intensity vs.Wavelength 1.2 1.0 0.8 0.6 0.4 0.2 0 400 450 500 550 600 650 700 Wavelength - nm TA=25° C IF=20mA Relative Luminous Intensity vs.Radiation Angle 100% 0° 10° H-H 20° 30° 40° 50° V-V 10mA-527nm 20mA-525nm 1mA-532nm 50% 60° 70° 80° 90° 0.16 0.18 0.20 0.22 90° 60° 30° 0% 50% 100% x http://www.csctw.com.tw Page 4/6 CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LO-N34STG1-QAOR A Rev. ： ： ： ： ： Model No CSLO-U34SHR1-QA0R http://www.csctw.com.tw Page 5/6 CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LO-N34STG1-QAOR A Rev. Precautions For Use 1. Recommended Soldering conditions Wave Soldering Temperature(°C) 2. Soldering Iron be shorter (+10 -1sec.). Power dissipation of iron should be smaller than 15W , and temperature should be controllable. Surface temperature of the device should be under 230 . 3. Static Electricity a. Static electricity or surge voltage damages LEDs.. It is recommended that a wrist band or an anit-electrostatic glove be used when handling the LEDs. b. All devices, equipment and machinery must be properly grounded. It is recommended that mesures be taken against surge voltage to the equipment that mounts the LEDs. Note: The specifications are subject to change without notice. Please contact us for updated information. ： http://www.csctw.com.tw ℃ →℃ ≦ ℃ ： ： ： ： Model No CSLO-N34STG1-QA0R ■ ■ ■ ■ 260(max.) 250 240 Preheat 105(max.) 0 Max. 60sec. Time(sec.) 5 sec. Basic SPEC. is 5 sec. When 260 . If temperature is higher, time should Page 6/6