CSLO-N54SSB1-QA0R

CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LO-N55SSB1-QA0R A Rev. PRODUCT SPECIFICATION LED Type Emitting Color Stopper LED Package : Oval LED Lamp Blue 110° /40° Viewing Angle CUSTOMER APPROVED SIGNATURES APPROVED BY CHINA SEMICONDUCTOR CORPORATION Address:2FL. NO.909,Chung-Cheng Road, Chung-Ho City Taipei Hsien,Taiwan. Tel:886-2-2223-9696 Fax:886-2-2223-9377 http://www.csctw.com.tw ： ： ： ： ： ： Model No CSLO-N54SSB1-QA0R Descriptions: : Superbright Lamp ■ ■ ■ ■ ■ CHECKED BY PREPARED BY OPTO PLUS TECHNOLOGIES CO.,LTD Address:696 Shun jiang Rd.,Ji Shan St.Shaoxing, ZheJiang,China Tel:86-0575-88623888 Fax:86-0575-88623112 CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LO-N55SSB1-QA0R A Rev. Features 1. Low Power Consumption. 2. High Luminous Output 3. High Reliability and Solid Performance 4. Optimal Optical/Mechanical Design 5. Rohs Compliant Device Selection Guide Chip Package Outline Dimensions - ： ： ： Tolerance ： ： ： ： Model No CSLO-N54SSB1-QA0R ＊ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Part No. Material CSLO-N54SSB1-QA0R LED Lens Emitted Color Blue Blue Diffused GaN ± 0.01 Unit 0.25 ± inch mm http://www.csctw.com.tw Page 1/6 CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LO-N55SSB1-QA0R Rev. A Absolute Maximum Rating (Ta=25 ) Parameter Power Dissipation Forward Current (DC) Peak Forward Current * Reverse Voltage Operating Temp. Storage Temp. Symbol Pd IF IFP VR Topr Tstg Tsol 1/10 Rating 114 30 100 5 -30 ~ +85 -40 ~ +100 Unit mW mA mA V Lead Soldering Temperature Max. 260 for 5 sec Max. (3mm from the epoxy bulb) Electro-optical Characteristics (Ta=25 ) Parameter Forward Voltage Luminous Intensity Dominant Wavelength Peak Wavelength Spectral Half Width Symbol VF IV λd λp ∆λ1/2 Min. ----400 460 ------------- Typ. 3.2 600 470 465 20 110(X) 40(Y) ----- Max. 3.8 1150 480 ------------- Unit V mcd nm nm nm Condition IF=20mA Viewing Angle ： http://www.csctw.com.tw μ Reverse Current θ θ θ θ 2 1/2 ------------50 deg IR A VR=5V Page ℃ ≦ ≦ * Pulse width 0.1 msec. duty ℃ ℃ ℃ ℃ ℃ ℃ ℃ ： ： ： ： Model No CSLO-N54SSB1-QA0R ■ ■ ■ ■ ■ ■ ■ ■ 2/6 CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LO-N55SSB1-QA0R A Rev. Luminous Intensity Rank Limits ( IF = 20mA ) unit mcd Part No. CSLO-N54SSB1-QA0R Code L M N P min. 400 520 680 880 Color Rank Limits ( IF = 20mA ) unit nm Part No. Code CSLO-N54SSB1-QA0R min. 1 2 3 4 460 465 470 475 max. 465 470 475 480 Notes: 1. Tolerance of measurement of luminous intensity :±15 2. Tolerance of measurement of Color Coordinates :±0.01 3. Tolerance of measurement of forward voltage :±0.05v 4. All data are measured by CSC's test equipment. 5. One delivery will include several color rank, VF rank and Iv ranks of the products. 6. The quantity-ratio of the ranks is decided by CSC. 7. Please confirm with CSC salesman,if your request different form standard specification. ： http://www.csctw.com.tw ％ ： ： ： ： ： ： Model No CSLO-N54SSB1-QA0R ■ ■ ■ ■ ■ ■ ■ ■ max. 520 680 880 1150 Page 3/6 CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LO-N55SSB1-QA0R Rev. A Typical Electrical / Optical Charateristics Curves Forward Current vs.Forward Voltage 30 IF - Forward Current - mA 25 20 15 10 5 0 0 T A=25°C Relative Intensity (Normalized at 20mA) Forward Current vs.Ambient Temperature 40 IF - Forward Current - mA 30 Relative Intensity ： ℃ ℃ ℃ ℃ (Ta = 25 ： ： ： ： Model No CSLO-N54SSB1-QA0R ■ ■ ■ ■ Unless Otherwise Noted) Relative Intensity vs.Forward Current 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 DC Forward Current - mA T A=25°C 1.0 2.0 3.0 4.0 VF - Forward Voltage - V Relative Intensity vs.Wavelength 1.2 1.0 0.8 0.6 0.4 0.2 T A=25°C IF=20mA 20 10 0 0 20 40 60 80 100 TA - A mbient Temperature -°C 0 350 400 450 500 550 600 650 Wavelength - nm Fig 6. Relative Luminous Intensity vs.Radiation Angle H-H 20° 30° 40° 50° V-V 100% 0° 10° 50% 60° 70° 80° 0% 90° 60° 30° 0% 50% 90° 100% http://www.csctw.com.tw Page 4/6 CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LO-N55SSB1-QA0R A Rev. ： ： ： ： ： Model No CSLO-N54SSB1-QA0R http://www.csctw.com.tw Page 5/6 CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LO-N55SSB1-QA0R A Rev. Precautions For Use 1. Recommended Soldering conditions Wave Soldering Temperature(°C) , and temperature should be controllable. Surface temperature of the device should be under 230 . 3. Static Electricity a. Static electricity or surge voltage damages LEDs.. It is recommended that a wrist band or an anit-electrostatic glove be used when handling the LEDs. b. All devices, equipment and machinery must be properly grounded. It is recommended that mesures be taken against surge voltage to the equipment that mounts the LEDs. Note: The specifications are subject to change without notice. Please contact us for updated information. ： →℃ be shorter (+10 -1sec.). Power dissipation of iron should be smaller than 15W http://www.csctw.com.tw ℃ ≦ ℃ ： ： ： ： Model No CSLO-N54SSB1-QA0R ■ ■ ■ ■ 260(max.) 250 240 Preheat 105(max.) 0 Max. 60sec. Time(sec.) 5 sec. 2. Soldering Iron Basic SPEC. is 5sec. When 260 . If temperature is higher, time should Page 6/6